Baby Crib / DIY Woodworking.
Вставка
- Опубліковано 7 чер 2021
- Hand crafted baby crib with bottom drawer , lot's of room for added storage, easily to assemble - using screw-in insert nuts.
Finally my long awaited follow up video - detailing measurements etc is complete ! guys check it out !
Here is the link ,
• Baby Crib '' 2.0 '' - Навчання та стиль
this is one of the most helpful videos for me (a novice) to follow easily and not be intimidated by all sorts of expensive or niche equipment. love the work! thanks!
Thank you young man , I'm glad you enjoyed my video ''cheers''
Dude, you a legend. I've been struggling with how to make my shop bought cot accessible for my wheelchair wife. You are the inspiration, I'll cut one side in half, and do the hinge idea you used. Thank you.
Thank you Sir , you both are truly inspiring, you're a good man , "cheers"
I have a bun in the oven and I can tell you, all the other videos always use high-end equipment and the process isn't explained properly. Seeing all that and as a hobby woodworker, I figured i may not be able to make one on my own. But you, good sir, managed to explain everything WITHOUT SAYING A WORD! Thank you for this!
Thanks so much ! ,,, I was fortunate as the wood was purchased at my local hardware store ( dressed) so it was just a matter of cutting to length . I too am just a hobby woodworker on the weekends , if you check out my follow up video (Baby Crib ''2.0''). I give a detailed summary (lengths & measurements)...
@@wallytrinc9885 Hello there Wally. So, i'm almost done with my cot but unfortunately, the only thing that remains is the threaded insert nuts. I can't, for the life of me, find them where I live. I'll need to import them from somewhere. Before I do, though, I have two questions. I've followed your design and work (almost) to the letter. Is there anything else I can do to bypass the need for the insert nuts? Something else that I can use to maintain the disassembly feature as well?
And secondly, you were the inspiration behind this and I'd love to show you what I've made. it isn't nowhere near as "clean" as what you've made here since this is one of my first major projects. But i'd love to show you, regardless. How can I do that?
Thank you so much for this video; there's a kid about to have a custom made cot just because of you. A whole lot of love from the three (2.5 right now) of us!
@@jujijo3149 Hello my friend , nice to hear from you again , Ok , if you cannot avail yourself with ''screw insert nuts with matching connector bolts'' , may I suggest you buy M10 round head timber screws (long),,,,, here is my Facebook page facebook.com/profile.php?id=100091956135903 , many blessings to your new family ..
Beautiful job! I love that you used pine, very underrated but I believe very beautiful. Thank you for sharing your time and talent!
Thank you Derek , I also appreciate your (time) kind words . truth be known , I have a love/hate relationship with pine ,,, Love the fact that it's light , readily available from my work place (undersize/off cuts)...hate the fact that if left in the elements (sun-humidity-cold air) it will cup-bow-twist !
I will have a follow up video shortly-detailing lengths/measurements , cheers !
Proud moment right there!
Nicely done
Thanks , I appreciate your comment 🙏
This is more than great... it's awesome! Great job!
Thank you so much ,,,you're very kind .
Wow..this is more than a DIYer.. very professional..
Thanks... the drawers/sliders idea, was watching your builds, salute 🙏
Amazing design!
Thank you , I'm glad you like it 🙏
Bravo.
simple clean and fast work, Welle done i appreciate your work and i will do the same for my kid merci beaucoup pour le partage man
Thank you , I'm happy you enjoyed my video , Merci , vous etes tres aimable 🙏
Top!!!! Lindo!!! Parabéns!!! Vou fazer um pro meu filho. Muito obrigado.
Obrigado, espero que meu vídeo possa ser útil para você .
SHOW! Amei o trabalho !
Muito obrigado 🙏
Thank you Sr For the example I did one for my son
I'm so happy to hear that , it's extra special when you make something like this for a loved one .
nicely done sir... hope u upload more DIY videos
Salamat "Idol" .... I try to make/build a new project every month.... I have a full time job , so sometimes this is not possible, take care my friend.
I'm going to be a new dad and would love to get those dimensions and attempt this project .you give me hope ..great video.thanks for posting it .
Congratulations to the soon-to-be-father , I am currently in the process of uploading a new video "Baby Crib Mark 2" with full measurements/dimensions etc as in this video, pls be patient,,, however it will be "metric"
Thanks for the reply
@@ericboisvert7862 Apologies for my late reply , here is my link for measurements etc , hope it helps.
ua-cam.com/video/00Y-Gebuyr0/v-deo.html
@@wallytrinc9885
❤
Very good and exciting
Thank you .
Nice work, i love the simplicity, the design awesome, much love from Ghana. i would love to make same for my in coming baby, if you could kindly give me measurements . Thanks a lot.
Hi sir DIY. Really nice, exactly what I want to make for my first child (february 2023). I would like to have all details about that. I saw I have to send you an email but I cannot find yours. Thank you for your future reply.
starting to work on my soon to come nephew's crib and thinking about it mentally - your design is almost exactly what im aiming for.
ill be making the back wall solid and the sides / front open.
the drawer is genis - love that.
if you read all this - id like to ask one thing :s
Where exactly can i find the threaded insert / bolt kit that you used? i like the idea of removing everything fairly easily if need be.
the way you hid the majority of the screw holes is genius by the way.
hope this reaches you - thanks for the great video. cheers
Hi , your comment , complimenting my baby crib video is the best EVER !
I'm even more motivated to keep creating quality content (DIY's) - thank you !
For a more in-depth look of my crib , please check out my follow up video .
Here in Australia my go to hardware store is Bunnings.com.au, regarding threaded inserts/bolts etc.
www.bunnings.com.au/taskmaster-6-x-20mm-screw-in-insert-nut-for-flat-surfaces-8-pack_p0035527?store=6427&gclid=CjwKCAjwoIqhBhAGEiwArXT7K8cxDu5V8q_mTdtEYrdoM0_FzdzumsOj1UfzktcQ3sZg9if5oRPORRoChs8QAvD_BwE&gclsrc=aw.ds
Regards Wally .
That's good work.i hope to make a cot for my newborn son like this.please send me the measurement.plz plz plz
Beautiful build, but for those inside hinge design, there's small concern as the clearance is too small for baby finger to slip in accidentally and cause injury.
I would rather make it a outside hinge or pivot on the stiles with having a couple inch gap from the bottom half.
Beautiful job, I'd like to do it by myself for my daughter, she comes next april, would you mind to share the measurements please?
Apologies for my late reply , here is my link for measurements etc , hope it helps.
ua-cam.com/video/00Y-Gebuyr0/v-deo.html
Link not work😢
@@hichamdouirek8542 ua-cam.com/video/W-_ykINGErI/v-deo.html
Buen trabajo
Me podria mandar datos de las medidas
Id worry the baby would figure out the slide bolt latches.
Nice crib though
Thanks , I think .
Nicely done. Would love to have the dimensions.
Apologies for my late reply , here is my link for measurements etc , hope it helps.
ua-cam.com/video/00Y-Gebuyr0/v-deo.html
Dimensions and materials used please 😊 great job sir!
sorry for late reply ,,, if you wish to send me your e-mail , I can send you relevant pics (dimensions) , thank you
Ive got the wood purchased to build this for my child. Will be going off of mattress dimensions for most of my measurements. Did you use plans for this build or off the top of your head?
Hi Steve , truth be known is , my wifE & I went to a Baby Store , as my good wife talked (distracted) the saleslady I was busy taking photos/measurements of their $1500 top of the range Crib , total outlay $$ for my build with mattress was under $150 bucks....let me know how you go mate ! cheers !!
Hey thanks for the reply. I guess my wife and I should go on the same reconnaissance mission. Cheers 🍻
You built this crib for $150? That’s amazing beautiful, I was looking to purchase the crib for my baby but it expensive
@@helencharmoon4186 Yeah the price of a good quality crib at a baby store is ridiculous , so I put my Carpentry skills to work and built one , thanks for your feed back. 🙏
Excellent video, how do I get the project?
Thanks my friend ...... sorry I do not have plans...this is one of my first videos (amateur) .maybe my second follow up video may help..ua-cam.com/video/W-_ykINGErI/v-deo.htmlsi=oX3Hg55waKm8AgsP
book shelves sir wally next video
thank you idol .... my wife want a coffee table , maybe next project book shelves hehehe
Não entendo só falo em português sou dó Brasil
All of that work and beautiful craftsmanship, only to have them never want to sleep in it and always beg to be in bed with us parents! LOL! Love the video.
Thanks for the compliment ..... & Yes you are 100% Correct !!!!
Hello, great work this is amazing. Can I get the measurements please ?
sorry for very late reply , if you wish to send me your e-mail , I can send you relevant pics (dimensions) thanks
مرحبا
عمل ممتاز أحب البساطة
هل يمكنني الحصول على المقاسات من فظلك؟
@@wallytrinc9885
Thank you for uploading this amazing build. I’ll be very glad if you could share the details of the dimensions with me Sir. Thank you in advance
Puedes compartir las medidas
Hola muy buen trabajo me podrías pasar las medidas por favor
Apologies for my late reply , here is my link for measurements etc , hope it helps.
ua-cam.com/video/00Y-Gebuyr0/v-deo.html
Love to get these plans to build for my god baby, can't find your email though.
Can you give me the dimensions, thank you good job
Hi , check out my follow up Baby Crib video ua-cam.com/video/W-_ykINGErI/v-deo.htmlsi=rqMaluAW6PA81vDa
can you please write the measurements. thank you
I hope he do that
Hi, please dimensions
Can you send me the measurements? I'd love to build one for my daughter
hi , if you wish to send me ur e-mail , contact, I can gladly send you all relevant pics, measurements/ dimensions , thanks.
Let me know when you send the email. Thanks again
@@wallytrinc9885 firt of all i must compliment with you for this great job. very simple but complete at the same time. I was thinking of building something like this by my self. Is it possile to have some measurement so i cant start from something? thanks
Ukuran berapa ini pak?
Silakan lihat video tindak lanjut saya boks bayi 2.0 .
So I did it too :D just using Stodoys woodworking plans :)
Dimensions and materials used please 😊 great job sir!
Apologies for my late reply , here is my link for measurements etc , hope it helps.
ua-cam.com/video/00Y-Gebuyr0/v-deo.html
Hello, great work this is amazing. Can I get the measurements please ?
Be patient , my new video " Baby Crib Mark2" will include full measurements, very soon , cheers .
Apologies for my late reply , here is my link for measurements etc , hope it helps.
ua-cam.com/video/00Y-Gebuyr0/v-deo.html