Dirt Bike Case Repair
Вставка
- Опубліковано 3 січ 2021
- Here is bottom case half from a two stroke dirt bike. It is damaged and needs repair. As you can see in the video it has a crack that needs to be welded and then dressed smooth. I used my TIG welder, die grinder, and Dremel for the job. Enjoy!
Great job, good to watch 🙂
Great job and looks awsome
Very well done!
Great Job!
Wow good to see someone who knows what they are doin. Wanna weld my case to 😂
Nice! I have one of these to do today, wish me luck lol.
Good luck!
Good job
Well i had someone weld my case, but there are still cracks on the gasket surface.
I bought a dremmel kit, so I'm going to do exactly what you did to mine, get it notched out and pay someone to weld it
On case repairs, used mixed wave form at relatively low frequency.
surprised you didn't finish off with a sheet of wet-n-dry on a plate of glass for a perfectly flat mating surface. . . kitchen Formica benches suffice. . .and yes, it has a thick paper gasket,
Super, Are you a AC tig and thick tungsten?
Lincoln precision tig 185 set to AC using 1/16 tungsten. I should’ve used my 3/32 tungstens!
I tried aluminum wire and argon in my mig and didn't have much luck. Are tumgsten sticks better? I have a stick welder as well. Thank you.
I was told by a neighbor to heat it up a bunch of times (not too much or anything) because he says it will help get oil out of the metal. Is there any truth to this or should I just rely on brake cleaner? Thanks for the video, I'm excited to tackle a very similar project!
I haven’t heard that one. Cleaning it well and removing the surface oxides and contaminants with a file has always worked for me.
IM NEAR ATL GA WHERE ARE YOU LOCATED
Email me: themellowmechanic@gmail
@@themellowmechanic IM GONNA SEND YOU PICS IN A LITTLE WHILE
CAN I SEND YOU A 2002 KX250 CASE THAT NEEDS A SMALL REPAIR CAN SEND PICS
If that wire wheel was used on steel, you made this job a lot more difficult.
HELLO I SENT YOU THE PICS ,PROP UNDER A DIFFERENT EMAIL