Jb Weld Can Repair Steel - Aluminum - Anything
Вставка
- Опубліковано 22 сер 2016
- Many of our videos are comedic & satirical & not intended to cultivate antisocial or unlawful behavior. Thank you for supporting our Channel through the below affiliate links. No price increase for you but we may receive compensation.
-Amazon - our store - wranglermart.com
-Jk Boots - www.jkboots.com/wranglerstar
-Radios Made Easy - radiomadeeasy.com/product/wra...
-Amsoil - www.amsoil.com/c/products/1/?...
-GoDark Bags - godarkbags.com/#cody411
-Premier Body Armor - www.premierbodyarmor.com/wranglerstar
-Vertx - shareasale.com/r.cfm?b=228804...
-My Patriot Supply - www.preparewithwranglerstar.com
-Eden Grow Systems - edengrowsystems.com/wranglerstar
Become A Wranglerstar Member For Exclusive Content and Perks
/ @wranglerstar
SUBSCRIBE: bit.ly/2btWfQR and turn on notifications to get them
#Proho #wranglerstar - Навчання та стиль
If everyone who complained would instead volunteer in some capacity to help somebody else, we would be living in a much better world. Thank you for what you do Wranglerstar.
Yep... I said to one of my frieds, many a year ago: " if everyone would take just 30 seconds, every day, to make life easier for someone else, what a better world we could have..." ... many years laster, he repeated this to me, as one piece of advice that had "stuck"... as you say.
If everyone who complained would instead give me $20 in some capacity to help me, I would be living in a much better world.
Speaking to the end commentary: I have some minor wild land fire fighting knowledge due to my forestry degree, and a few summers doing controlled burns for the state in Louisiana. There is occasionally down time in a fire. I thank you Cody for taking your down/rest time to share your experiences on the job with all of us watching.
Cody thank you for you service as a volunteer firefighter and for this great video on the proper steps to get the best results possible from JB weld! That is a low pressure pump and I feel with the effort you put into your cleaning the JB weld will give you a long lasting and low expense repair. If I was going to hot work repair that part I would have 7$ in making the decision of the best way to do that! You have made a good choice If that repair did not work it could always be ground off and then a hot work repair could be made. My Dad always said if you can't fix it at least don't make it worse! That JB weld would be a lot easier to deal with than an improper attempt at brazing or welding. Sometimes good enough is better. Extensive hot work could possibly shift the damaged threads even more making the welded part worthless. I am a big fan of you common sense approach to handling problems. Keep up the good work.
I watched this video last summer and bought JB Weld just cuz you recommended it. What a money saver! I left my Hot Water On Demand unit outside in sub-zero weather this past winter and cracked the water circulation tubes (duh). I remembered I had JB Weld and tried it out. Cracks fixed, no leaks. Our outdoor shower is back in operation. Thanks Wranglerstar!
I own a vacuum repair shop and it was so cool to watch you repairing something. That is what I do every day :) It's a great feeling to restore something to working order, right?
Using a slower setting epoxy instead of a faster one is always the better way to get a stronger bond. This is because a slower setting epoxy has more time to wick into cracks, pores, etc., (going deeper) before it sets up. Using a corse abrasive to prep also helps by providing a better mechanical hold between the surface and the epoxy. If you are not under a time restriction, always go for the slow.
Totally behind you on your explanation for filming during the firefighting! I know several professional firefighters, and there are always little moments of safe down-time. They DO also need more volunteers and professionals, so getting the videos out of what it's really like is IMPORTANT! Thank you and keep up the great work and vids!!
This video is excellent and will likely save thousands of people a ton of money in repairs and replacement parts. A very small percentage of folks have the equipment or the knowledge needed to weld or braze ANY type of metal, let alone cast aluminum. JB Weld is a proven low cost and effective means of making reliable repairs, that EVERYONE can utilize. Again, this was a very thoughtful video that will help a lot of people!!! A+ on this one, Cody!!! re: the high cost of durable replacement parts.... most spare parts like this cover are a liability for manufacturers and they will never be sold so they have to figure in the loss of making parts they won't ever sell along with the cost of storing those unsold replacement parts for decades. I have seen warehouses full of brand new durable replacement parts that were manufactured for engines and equipment in the 1930s or 40s.
I love your stuff Cody, especially the firefighting stuff. Keep it up and to heck with the commentators that have no idea what you do or who you are.
Also, growing up my dad used JB Weld to fix a pontoon on his boat and it's still holding to this day. Atleast 15 years ago!
4:58 -- "find the end of the crack and drill it out." I learned something today. Thank You.
Me too
But did he need to drill it, if he was going to patch it with up with the epoxy anyway?
I know that like on a windshield crack , instead of just filling the crack with adhesive, they drill the end of the crack to prevent the crack from running.
@@RomanticPopPunk Absolutely. Drilling a circular hole at the end of a crack reduces the point stresses that cause a crack to propogate. The JB weld patch is just that - a patch. To properly 'JB Weld' that cover he would have had to grind out the crack and fill it with the epoxy mix in much the same way as a real molten metal weld is carried out.
That's what I was hoping to see as I've got a seriously thick (nearly 2") crack to fix on a part that would cost $600 to replace.
Can this be done on a hot water heater that's busted on the side corner?..I want to try using the weld 1st, before buying a new one...
WranglerStar. Had to figure out to JB weld my lawnmower gas tank and I have watched this video to help me. Thank you for sharing and thank you for your dedication and service. Thank you for all you do.
I've been a volunteer firefighter for 7 years now and I still cannot throw a hose that cleanly. You're awesome!
I agree with you 100% Cody I was a mechanic for 12 years and I got out of a lot of jams with this stuff on my own parts and for customers that didn't have a lot of money, it's all in the prep,!! Like u said, fix a lot of ford exhaust manifolds with it
JB Weld was just a standard item in our tool Kits growing up in the country. Aluminum or steel welders were not always available.
Great set of videos as teaching tools for old school skills for the X and Y genners...forwarding this to my kids, then work with them on building a shop in our garage so they practice what you show. Thank you so much for bringing the skills of yesteryear to the 21st century!
JB Weld, great stuff. I have used it many times since I was a teenager in the early 80's. Worked well on my dirt bike aluminum flywheel cover (Honda), a loose factory crimp on an aluminum four barrel carburetor, and the list goes on. Yes, mig, tig, or brazing would be better, but for a quick cheap cold weld it can be a viable option.
Totally agree about the JB Weld. Used it two years ago on an emergency mid-winter repair to a 65 yr. old steam boiler heating my house. lasted the season, emergency solved, house and 7 people warm inside. Summer came and we had a new heating system in place. Mid winter is no time to take 4-5 days to replace your heating unit.
I'm enjoying this video series, not that I think I will ever need this skill set (the info is nice to have in the back pocket though lol) but just because of the stories you have shared with us. Thank you Sir
Bravo for your attitude to capturing a bit of your fire work, Cody - a wonderful insight into that work and your perspective. Thanks for all you do and for not being intimidated by those that don't understand!
First time I saw one of your videos and it was EXCELLENT! You speak so calmly, knowledgeably, and practically. I will be back! Thank you and blessings to you for all of your volunteer work.
Wow, where I'm from we all have a whole lot of gratitude and appreciation for our fire fighters. Paid firefighters don't get paid enough to do what they do and Cody isn't even getting any money to do it. Shame on you, whomever you are, for your ignorant and disrespectful comments toward Cody. I have even more respect and more interest for what firefighters do thanks to the videos you upload sir and I appreciate the Extra effort you go through to make these videos, on top of all the hard work you put in to do the job and through the exhaustion. I'd like to give a special thanks to any firefighters reading this comment for the work you do, recently my home, family, work place and friends homes were kept safe from two very large fires in SoCal that were both very close to me. If anyone has one ill thing to say about any of these real life heros, just try doing their job for a day and you'll see that they walk into the mouth of hell and see things that would leave you curled up sucking your thumb, to protect people and property of complete strangers.
Thank you VLM
I'm lazy and cowardly and generally useless (aside from my job). But you know what, if I don't have to pack up my family and run away in a panic, forest fire fighters (paid or not), when they have a spare moment, they can whip out their cocks and rub one out for all I care.
It's these self same assholes who bitch about wasted camera footage, that need these vids shoved in their faces to SHOW... just what goes on out there.
In fact, you know what, Wranglerstar, I think you should do some "in the shit" vids. If you don't have a neck cam, I imagine a gofundme will get you one in short order.
I agree, I think people should show cody a little respect.
Show some respect please Clint I now have to stop my son watching these vids now because of you comments
I absolutely love jb weld. I cannot tell you how many times it saved me. I once even used it to fix a cam position sensor on my buick. if it wasn't for jb I'd would have had to scrap the car. also used it to fix an awning during hurricane Sandy. and fixed a crack on a Transfer case. it's the stuff of miracles.
I was once attaching a projector horn to the stator of a siren--no small task. I was shaping it as I had put two homemade parts together and wanted to make it extremely strong to withstand any vibration. So I used JB Weld ! I've never questioned that wonderful product.
Hey Cody-Thank you for sharing your thoughts on the comments on the other video. I myself did not take the time to read what people were saying, but can very well testify to the pure ignorance of a great majority of people. Many years ago before the technology of digital cameras and such I too served some very enjoyable time fighting forest fires. None of the fires I was on ended up being huge devastating fires but did threaten nearby homes. So creating defensible spaces and fire breaks was the major part of the job of course. There was always a some down time, a few minute here, more time there. When we were working we were busting our butts and getting it done as quickly as possible, then wait for orders to move on to the next area. Until you have served on a firefighting crew you have no idea of what really happens. Thank you for taking the time to point that out, stand up for all who SERVE setting the record straight and sharing what a rewarding experience it can be. As for everything else, thank you again for sharing your families life with us, and I look forward to seeing the pump working- God Bless
Hi Wranglestar, I've been following your channel for a fair while now. You are doing a fantastic job on the very diverse film topics and your volunteer fireman work. I for one appreciate the very natural, friendly videos you produce - Please don't let negative comments get to you or affect you in any way. Keep up the good work buddy. You don't have to justify anything to trolls.....
Back when I was in high school my family and I were on a road trip in Michigan and the radiator on my dads pickup blew. The seam along the top that crimps the metal grate section to the plastic top section split about half was across the the length of it. The auto parts store in town didn't have a new one and would take a week to get it if we ordered it. Me being me and us running out of options we could afford, I went to the Lowes in town and bought JB Weld, a butane torch and soft solder. I uncrimped the plastic section, sanded down the metal and soft soldered the split seam back together, then crimped it all back in place and gave the whole seam a nice thick coating of quick setting JB Weld. We ate lunch and hit the road. 3 weeks later after all the heat and pressure the soft solder gave out, From the look of it the JB Weld never failed. Good stuff, especially when you do proper surface prep.
dude JB weld is amazing stuff. I fixed a radiator crack with it, held for 4 years. I was hoping you used this as an excuse to get a nice tig setup ;)
Well said at the end there, as a former Wildland Firefighter in C.A. I don't think there is not enough video to show people the work wildland firefighters do. Media only shows "the excitement" and there is much much more to it, some exciting but mostly hard work and sweat for little to no pay. Keep making the great videos and stay safe out there.
JB is great stuff. I work at a tractor dealership and there are always customers who wont or cant spend big bucks on a repair. Many times the part is back-ordered or has been obsoleted and cant be found. We do just as you did with the die grinder and Rol-Loc discs. We have repaired aluminum HST housings, steel hydro tanks, plastic housings, fenders, hoods, lots os stuff I cant even remember. They make a putty product that I used to fix a hole in my car's oil pan called Steel Stick and a putty called Water Weld that cures under water and is safe for potable water too. Good job and good vid!
Your real fans know that you put in the hard work every day, AND you manage to video at the same time. Just block/ban the trolls ad libitum :-)
Preach on!
"you just can't silence the voices you don't like that's where the conversation ends." -Philip Defranco 2016
"There is no point in having a conversation with a troll/ ignorant person... Thats my experience." - Jim Rob 2016
Not sure I'd block and ban everyone, just ignore them. Let them stay and see what a good man and a good family looks like though... Wranglerstars are a role model all should see... more grit than I have by a country mile that's for sure!
You can't learn if all your audience shares your same mindset, Then everybody just pats everyone on the back.
I'm sure the JB weld will hold fine, but I think over time the epoxy might soften from water sitting in the pump unless it's drained after every use. Weld would be stronger too.
And yes just like with painting, prep is the MOST important part
I love this style of videos as well as your Wildland videos. I appreciate all the effort you put into your videos to make the such the high quality they are
I remember my Dad fixing stuff with JB Weld many times as a child. Keep on keeping on Cody with your firefighting vide os. I enjoy them as well as all your videos.
I think the replacement parts are so expensive because in the case of production lines and storage, the manufacturer has to make surplus stock for replacement parts, then store them for many years, just incase someone wants one 10yrs down the line.
We're probably only a handful of years away from affordable 3d printing to order.parts will be cheap then. Imagine you could go into a Honda shop and order an obsolete part from 30yrs ago, the parts guy taps in a code and it prints same day.
It's only a matter of time before this is a reality! :) Who knows maybe companies will release CAD files as open source for older designs and you can just take it to a kinko's style shop to have it printed out.
Sooner than that man, they are really developing that tech here in china at breakneck speed, its scary actually how quickly they are involved and improving a technology, it will be available soon
It's more likely that companies will protect their intellectual property and you'll have to pay for that data. It will be interesting to see how this technology diffuses into the world and how manufacturers protect their profitability, but I assure you, they aren't going to allow technological innovations to endanger their market positions. This is the age old lie that we keep getting fed. That one day technology will un-encumber man and society. That will never be. The sad fact is, as new technologies emerge, corporations will invent new means to control them and own them and exploit them, and governments will do nothing to impede it given their loyal devotion to 'free' market ideologies. Take it from a guy with qualifications in 3D parametric modelling, mechanical engineering and a degree in design and innovation.
Thanks a lot Cody... I got yelled at by my doctor when I went there and had my broken finger covered in JB Weld..
Why did you go to the doctor? JB Weld is a perfect cast!
Hahaha, KEYLITHO that was really funny:-))
Great video Cody I love watching them and your wonderful family. Keep up the good work. And keep your head held high.
Beautiful commentary on a clearly explained repair. Your explanation of how, when and why you video your firefighting was humble and thoughtful. You are the nice decent neighbourly guy I think most of us would be glad to have as a best friend.
You can recast it with aluminum if you have a furnace and some green sand
in the name of Moses .. pls add fiber/structure with the jb weld mixture .. to make it much stronger ... You can use old jean fabric ... thin aluminium plate .. fiberglass ...etc..etc ..
jb weld is magnetic. you could put a magnet on the other side and pull it in the crack!
Thank you. That is the only thing that I learned from this video.
That's a great idea. But wouldn't that have to be the steel reinforced version of JB Weld? I don't think there's any steel in the cheaper, original version.
Would that work on a dime size hole in a small mini cooper transmission or will it get to hot and too high in compression and re- blow?
Shredders I don't know about steel in the "cheaper" version, but in tests all over the internet, the original J-B Weld is consistently the strongest bond on just about everything people have tested. The Project Farm channel has done the most accurate, consistent and well thought-out tests of every type of epoxy, and the original J-B Weld is consistently the best. BUT, you have to let it set for at least 24 hours. About 47 or 48 years ago I discovered and used the original J-B Weld to fill pitted areas and other defects in the aluminum head of a 1958 Mercedes 220S engine(blown head gasket from the pitting), and the repairs and new head gasket were still working perfectly when I sold the car, about 8 to 10 years after making the repairs.
Shredders the jb-weld he used in this video has steel. The black tube literally says steel on it. You can see glitter like grain in it too.
Such a busy life you have... cant imagine taking the time to make these video's, while doing what needs to be done, then take the time to read and respond to those that offer their .02. Thank you for all you do.
I just started started making videos for my channel. Haven't opened mine to the public yet but I sure realise how much work is put into the process of filming and editing. I appreciated what you and others do before but now much more so.
If you wanted the surface cleaned well and roughed up a bit, why didn't you use your sand/media blast cabinet?
I was thinking that if he ground off all the casting plugs and gave it a bit of a polish, then the water would flow a lot smoother.
ChicoMillion
As for the naysayers who poo poo the JB Weld, not everyone has a TIG welder in their garage or down the block. You learn other ways of doing things. JB is good stuff and I've seen many a repair effectively made with it. And as for the people who yak about shooting video at a wildfire instead of putting it out... stay in your burbs because you don't have a clue. Wildfires aren't "put out," they are contained. I agree with Cody, don't talk about things you know nothing of. There is a saying, "It is better to say nothing and let people wonder if you are stupid than to open your mouth and prove it."
Right. I could never justify spending the money a proper TIG welder cost, when it's a tool I would use only every now and then. It needs to be said tho - JB weld doesn't fit every situation, but this, I wouldn't be too worried. However, I happen to have a welding shop "down the block" :).
Was looking up aluminum welding and your video popped up on me lol. My how time passes by! Makes me miss the old homestead.
I've been using JB Weld for years and love it. Great video!
Ive used JB weld many times. That stuff is the bomb.
except that hole should have been tapped. Then put in a bolt with locktite. Grind off the excess bolt on the inside.
Been in the trade over 20 years. Rivets wouldnt work like a bolt does. What i failed to say is you repeat the process down the crack slighty overlapping each bolt.
_lh3.googleusercontent.com/XDGsBRMz3j0PUzIy8RPKZ7jAj9TxeVGIFav0AzEpMuyxFI_o8vfY-1dVY1ngt0vOzBiix_cCOA_
I didnt do the one in the pic. But i have fixed a cracked block like that . worked fine.
Possibly. I've also found in life there is more than one way to approach a challenge, there really is no wrong fix as long as it gets fixed.
Too bad I don’t know if it worked
As a car guy,I have been using JB Weld for over forty years.It's great stuff and it always amazes me what can be fixed with it.
ignore the comments that are not helping, we love to see what you do, you are an inspiration to my family and kids, they say when they get older we want to be part of the volunteering crew. we love your videos, thank you so much.
Arriaza Santiago family in san Francisco california.
I have a concern Cody! Don't do this! Why? I had tested the PTO pump on my fire engine in the morning. When I got to a fire, still small and unnamed, but just starting to crown in that afternoon's heat, I pulled up where it was going to cross a dirt road - knowing I could knock it down with two hose reels and a side fixed wand with a thousand gallons. But the wire someone had used in lieu of cotter pin sheared when I engaged the PTO and it left me there dead in my tracks. Obviously I survived, but the 1/2 acre fire ended up burning nearer to 1000 acres of the Deschutes NF. Oregon's Spring Butte Fire. I blistered my FS Engine, melted the plastic blinkers and reflectors on that side of the truck, and worst of all lost that fire fight right then and there. You risk VASTLY more than a few dollars when you short your fire equipment, especially a pump. At least TIG weld it. It may break just when you need it the most.
Not a pretty fix but it should work. Fixed a tractor PTO case with this when I was younger. These days I would tig weld though...
It's your channel, Cody. Do whatever you please and those who like it will follow. Those who don't will hate and guess what? They still viewed your video, they still had to go through ads (if you have any on the video) and they still improved your overall UA-cam stats. So yeah, hang in there and keep it up! I love going through all your videos and I have learned a plethora of different things from watching you. Thank you so much! :)
Love these vids when you are working on a project, keep up the good work and im looking forward to the next one.
You know what, if we're me, and I love the Idea of fixing stuff If there isn't an alternative or it's not supper critical if it fails. but it's a firepump, I would suck up the 300 bucks. keep the repaired part as an emergency spare.
"Drill a hole at the end of a crack to stop it" I learned something new
my dad taught me that years ago, noob
@@bittasweetsymphony726 good for you!
THANK YOU for serving, my young 27yr old son has volunteered at a small county under-staffed Fire Station since he was 18, he came upon the station out working w/a fellow scout on a service project. I have told him about our channel so he can learn from you and have some guidance/wisdom passed along, that maybe one day will aide him as he serves in an "unnoticed" way. I appreciate you for serving/sharing/teaching, only Heaven can reveal the affect you are having on so many.....keep up the commitment and Serve as Unto Our Lord, Be Blessed and Safe
Love your videos. Love the good honest everyday experience showed. Can't wait to see the results!
A soon as you started mixing that jb weld I swear I could smell it!
Look up Alumi pro welding kit. Way stronger than JB weld. Easy and fast to use.
www.duluthtrading.com/store/product/alumi-pro-welding-kit-28407.aspx?&src=T13WFSHP1&admkt=&mkwid=sCTVDtuqQ_dc&pcrid=119915908081&pkw=&pmt=&gclid=Cj0KEQjw6O-9BRDjhYXH2bOb8Z4BEiQAWRdukxwesUyV84ycHftpfETxhsIHMN-opqJMhAofLV9R0JkaAlZZ8P8HAQ
yes
+Hunterdude How about an exhaust manifold?
The Griffin Benchmark idk it may get to hot for it.
The kit is cheap and works on a lot of stuff. Plus it wont dry out like jb weld will over time.
I really enjoy and look forward to your videos!! You have a wonderful family..makes me feel some hope for everyone Thanks
I think the amazing thing here is that you have over 40 thousand views and over 700 comments with over 400 thousand subscribers, you are a tremendous success story with your channel and your life so let them comment all day long, win win for you, my guess is that the JB Weld will work in this application, thanks for sharing your stories and subjecting yourself to the comments and criticism..............you have great content
13 minutes and 46 seconds of video and you did not even show us if the repair held.
You are correct. Even WORSE... he made a later video showing "CATASTROPHIC" failure and the water COMPLETELY destroys the JB WELD....
...so HOW does he not investigate and SHOW US how / why it failed?
Love this guy... but that's just NOT HONEST.
I just wasted 10 minutes listening to a philosopher. I have no idea if the "fix" worked. Why put the answer in a second video which is not even linked?!?!? Go ahead and block me but you have to take constructive criticism.
95% of home appliances now days are designed to only last a few years before a part breaks forcing people to buy a expensive replacement parts which is why when I get my own place I'm going to get an older stove so I can repair it for cheap.
Well that is because most people don't want to pay the extra cost of buying things that last a long time.
Thats an assumption that many people make to rationalize making cheap crap. Given a option is the better way look at snapon tools for example they are not out of on their rears with all the cheap crap tools in the world.
M3tcalf1 No the reason people make cheap crap is because they can sell it. You have to be very rich to have great quality for everything in your life, and if you only use a wrench a couple of times a year then paying double or more for it is not going to be an attractive proposition for you. Good enough is the reason we have so pleasent lives in the west as we have, its a much more efficient use of time and energy.
+STGN01 some people may choose to have less.... and have quality
Actually you may like AvE's BOLTR series, and it's baffling what's going on there. Most tools don't differ all that much in the amount of effort they take to make, and the material and parts cost differences aren't all that huge either, but there's a huge difference between brands as to whether and where they put in deliberate failure points. That's a distinct drawback of capitalism for you, where brands that do the best work carry the greatest risk of putting themselves out of business!
I thoroughly enjoy your wildland footage, I am so grateful for the men and women who put their lives on the line in those fires. Watching your footage has made me greatly consider becoming a wildland firefighter. I've wanted to be a firefighter in the past I received my EMT cert and was going to go to school to become a medic but the school I was attending got rid of their paramedic program. My wife and I are actually thinking of moving out your way for me to go to a paramedic school in Oregon. Keep up the great work, and God bless.
I get how you can get caught up in providing content for viewers and in responding to messages be in positive or negative. I think you should just be you. Even if it meant loosing some people along the way, and that's easy for me to say since I don't have a family that's dependent on channels income or what have you, but I enjoy your channel and your heart and mind seem to be in the right place in all of your videos. You don't owe me or anyone anything or even an explanation. You provide great content , and I appreciate all that you do and choose to share with me and the ppl who enjoy your videos.
This is firefighting equipment and you cheap out... not your style to make excuses for half-a**ed work... weld it next time...
Easy for you to say. This is a piece of equipment I'll most likely never use. The $300 is better spent other place.
After watching you make 8 video's about a worthless hatchet that can barely split soft pine and go on and on about how your tools are SO MUCH BETTER than anything else you can BUY when in reality an admittedly inferior store bought tool will in the end do EXACTLY the same job I find your argument at odds with your prior positions. This could have ,, and should have been a 6 episode lesson...
I'm just pulling your leg ,, it's good to see that you're finally coming around to my thinking that wasting so much time on tools is a complete waste ,, it's the results you get out of them that count...
Nothing cheap about JB Weld, other than the price. We've been using it for years, with no problem
First off, I am sure that Cody will thoroughly test this before relying on it for firefighting. Secondly, This repair only needs to hold 60 psi from the inside. Cody completely analyzed the crack and realized that pressure from the inside would not compromise the repair. Lastly, Welding Aluminum is very HARD TO DO, It is also a VERY EXPENSIVE process, due to the need for specialized equipment. I will bet the JB Weld holds long enough for Jack's kids to use the pump !!! Maybe even Jack's Grand Kids !!!!
+Brian Tracy didn't your moma teach you to bite your tongue instead of say mean things. haven't you and common decency.... where's your pump repair video huh?
Love your videos Cody,I have been following you for quite some time now, keep up the awesome work.
your a friendly man Mr Wrangler thanks voor the nice upload and your time!!
i poked a hole in my summit's radiator, gonna use jb weld to fix it and i came to my source for a properly done job, Wranglerstar ! Thanks.
You are a hero for fighting fire and double hero for volunteering to fight fires. I like seeing what you do and what is involved with you and others out there. You said it was the best job in the world. Thanks for letting the rest of us see this.
I've passed up JB Weld several times when looking for epoxy. I'll have to grab some next time. Thanks for the info on it!
Good Job!! I love JB Weld and couldn't run my small place without it. I found out about it from several of the old farmers in the area when I was asking where I could get something repaired. Good idea to share the info. Thanks.
My wife recently told me about your channel - she's a fan and I think she's watched every one of your videos. I'll get caught up this winter. What's cool is, THIS is the FIRST and ONLY video I've watched of yours, so far. The very next day, I was doing maintenance on my new (to me) 1948 Gibson Model D garden tractor and the oil bath air filter, which was bone dry, piddled all over the concrete after I put oil in it. So, having watched this one video, I knew exactly how to fix it. Thanks for learning me on JBWeld. You blessed me - and ain't that just like the Lord, to lead us to what we need, at just the right time? So do you have a video on using Helicoil inserts? ;^) Jack
It's going to work... I've fixed stuff with this as well, and i have been nowhere near as careful with the preparation as you were. And it still worked.. JB is awesome
Thanx for your services as a firefighter. You are a true hero of the land
my father swore by JB Weld....and I still use it today. One difference....he always used vinegar....white...to prep metal.....I do today.....and the FF stuff...won' t miss the deleted lost souls for one instant.....it's good to show that stuff.....as you so accurately note; a few younger folks could well be inspired to jump on board a most respectable and commendable, project!!
Thanks Cody... as usual... a great video. Hope that the JB Weld works for you, as I am attesting to myself... it will!
I use JB weld in my process of making alcohol stoves for back packers. Never has one failed. The temperature rating is beyond what an alcohol stove would ever come to in normal use. I am a fan of this product. Can't wait to see the result!... thanks again.
I think I enjoy every one of your videos I ever watched thank you for your time spent making videos I do appreciate you
Thank you, Thank you, Thank you for all you do for us on UA-cam and others, you are all a great exampel for me.
You are on the right track with the firefighting videos, I have been considering firefighting lately and the only reason is because of your videos. Keep up the good work.
This video is the first video of yours that I watched :). I bought a used canopy frame and the bottom of some pieces are rusted and deteriorating. I went looking for ways to repair them. The last part where you talked about the ignorant comments - I agree with you. They don't know what they are talking about. Firefighters are people who have hobbies and some free time and you men and women have a right to use that free time to let your mind relax from your work - whether that's checking your phone, shooting some video, or gazing out into the open. I agree that filming is a good thing, so that you can show the importance of your volunteer firefighting. Finally, this is your channel and you can block and silence whomever you want. This is not a news channel who aren't allowed to block the people's voices. That is not your obligation, so for those who claim you shouldn't silence the people - if it were my channel, I'd delete their comments, too. You spend your free time filming, editing, and uploading these videos. Their negative voices will only harm your channel, because people can be influenced by them and then your comment section is filled with those negative, nit-picking people. Please, keep up the good work! What you do is so important for people like me who want to learn!
First of all, thanks Cody for sharing and making and keeping this world a more educated and safer place. I think replacement parts a so expensive, because of the storage. You can imagine that all of the parts you could possibly need for each manufactured machine, has to be readily, so warehouses will have to be made, filled and maintained for our needs. Some parts might not be needed, so the manufacturers have to share the real costs among all of them. I'm not defending monster-companies, just trying to find an explanation....Again, many thanks for your sharing, and thank you for visiting Holland, and your perspectives on our lovely country!
Where else can we see volunteer firefighters doing what they do? I never really saw wildland firefighting and CERTAINLY never dreamed of doing it myself, until I watched this channel. Behind you 100% Cody.
I love JB Weld, have made replacement gears that were plastic to start with, and made casts of gears from wax and another from clay several years ago and gears still working like new..
Great video. I used JB Weld high temperature putty to repair a crack in the water jacket on my 1940 Farmall; ground out the crack and cleaned it, removed the paint around the crack before applying. works great, though it's a very low-pressure system so there's not really much strain.
great vid a big help for me cheers from Tasmania! and merry xmas and happy new year!
Respect brother! Thanks for blocking trolls. Keep the vids coming
Thanks WS for the fire-fighting vids! They're very educational and, I'm pretty sure that your Captain(s) gave you approvals to do them.
Don't mind the "ignorant" haters!!!
Excellent video. It is great to see proper use of products!
Cody, bless you and what you do. Many of us are very grateful for your videos. Don't let the idiots get you down. An Idaho neighbor thanks you.
Great video Wranglerstar keep up the good work 👍
JB weld is great for many things. As a former mechanic have used on many thing. Like you comment, I to have used on engine blocks, even between cylinders after head gasket blow out. Thinking it would be a temp fix. Engine went on to out last the machine.
Also, just want to say I really enjoy your diverse videos.
Many thanks as well for your fire dept service. My bother is the chief back in our home town. I was never on the dept., but would volunteer to help if they pages out multi time and need help.
I LOVE JB Weld!!! I used JB Water Weld on the bath tub of my camper to repair a crack - saved myself about $400! I repaired a head on one of my garden tractors where the exhaust pipe screwed in with their hi temp version - worked great!
Hey Cody, Big fan. Much respect from Newfoundland Canada.
You go Cody! I have nothing but respect for you. My grandmother taught me not to criticize someone if you haven't walked in their shoes.
BTW, you're selling me on moving to Oregon after I retire. 37 degrees in August! Yay!
We once repaired the crankcase on the jet ski I used to race (semi-professionally) using JB Weld. The engine was heavily modified and blew the connecting rod straight out of the crankcase... a total engine failure. We had to replace the top-end, get new connecting rods, etc, but the JB Weld held out for the rest of the season, even under such extreme conditions! BTW, we couldn't have the cases welded because the porous aluminum castings were saturated with oil, but we were able to clean them and scuff them up good enough that the JB Weld held until I eventually sold the motor and never heard any news that it ever failed! I'm a believer...
I have a really nice steel 9 panel front door. Under the brass kick plate I noticed rust and after sanding I could see a hole. I was looking for repair recommendations and saw your channel. I've been subscribed for years and should have known you would cover something like this :). This is going to save me so much money. Headed to the hardware store now. I first used Rustoleum and I'm applying 2 coats. Then the JD Weld and finally sand and paint. If anyone has additional recommendations I would appreciate it!
Glad to see that you still have your Benchmade...
just keep doing these great videos. I do appreciate your effort. I have a 1972 mercedes 280 SEL with a cracked transmission that I am planning to patch with JB wild.
Cody you hit the nail on the head. People who are critical just like to do it to make themselves seem larger than they are. You are one hundred percent correct when you say they have no idea what they are talking about. Unless they have been in that situation they have absolutely no right to make comments like that. I have found that people are brave to make fools of themselves when making those types of comments when not face to face with someone. Unfortunately common sense is no longer common in today's society. Keep up with the work you are doing. I am enjoying you videos.
Thank You...for sharing your life. I for one appreciate you and your family...Tony Cassara