Chrysler Total Integrated Power Module TIPM Fuel Pump Circuit Failure Diagnosing, Testing & Repair
Вставка
- Опубліковано 8 вер 2024
- Chrysler models equipped with a total integrated power module or TIPM may exhibit a fuel pump relay control circuit failure. When the key is removed from the vehicle, the fuel pump will continue to run.
In this video the diagnosis and repair of the faulty internal fuel pump relay will be covered.
An external relay breakout harness is available to bypass the faulty internal relay. The part kit will be specific to the VIN of the vehicle you are working on, however it is possible to modify a kit to be used in a vehicle with a TIPM fault without an available repair kit. Use the wiring diagram for the vehicle you are working on to determine terminal assignments and repair kit installation.
Watch out for internet and mechanic bypasses that leave the key on engine power to the fuel pump when the key is turned on in an accident you could be feeding the fire and cause an explosion or death don't buy the cheap kits online and don't let your mechanic solder a wire or make one you are risking your life and other people's lives this one fixes it correctly
Definitely 💯
Thanks so much
I saw the problem right away . Only one connector was plugged into the TIPM 😜
Underfoot Adventures 😆
it sounds like you wired
30 pin of the the relay goes to the power
85 was wired to the pink/green wire
then again 85 pin of the relay is sodder to brown wire in the black connector
then finally the back to the brown connector where the
blue/orange wire is sodder to the 87 pin of the relay
no 86 pin ? am i missing somthing ?
relays 87
86 85
3
0
Im with you on this too. Two 85 wires on the external relay? I'm confused
He mentioned connecting relay terminal 85 twice, that's wrong. Relay terminal 85 ONLY connects to BROWN WIRE.
Good video but it could have been more clear about the wires going to which terminals at the new relay. The dealer sends 4 loose wires and a seperate relay. Also I didnt see an explanation as to why you removed the green connector. Otherwise this made the job much easier. Thanks.
I have the TIPM BYPASS MODULE
FOR SALE...#TIPM2020
901-581-1599...ask for Randy
2014 Town and Country van. What is going on in my van is, the windshield wipers are going, all the lights are on in the dash, it say to check to service the tier pressure system, service the blind spot system. Plus it say the cadlic convert is gone. Getting pretty expensive with all that happening at once. I looked at the fuse box, and a few fuses are missing. Don't know how that happened. Have any idea's???
The relay have two 85 or he is suck?
Great video!
Hello I have a 2007 dodge magnum sxt 3.5l and I’d like to know if you sale and have in stock one of these kits for my car
How much power should the current be
Does this fix the TIPM?
What part number repair kit do I need please.
Can you come to my house and fix my 2010 Town and Country? Its at Rodeo Dodge Queen Creek, Arizona for the same TIPM issues.
AUTOLOGIC, what does the TIPM do to the cars modules, does the TIPM circuit convert CAN signals into other buss signals or what?
No. It’s mostly a circuit board with most of the fuses attached to it for the circuits of the vehicle but it also houses internal relays, like the fuel pump relay, which is non-repairable.
Just the tipm