You can take the door panel off without removing the switches, all you have to do it disconnect them once you have the panel loose......that's what I did when I replaced both front window regulators a few months ago.
Definitely should have been a way to take the cover off only this is too much because that’s the only reason why we are taken these panels off anyway everything else works forever
Are you sure it's not the same signal with a passive crossover on the tweeter? I'm about to replace mine with some components. Should I wire both the tweeter and speaker signals to the crossover?
@@CaptSlowMTB on the late 1990s to early 2000s GM trucks (refering to the suburban and silverado) the speaker harnesses are the same. All you have to do is connect one harness to a crossover and run new wires out of the crossover to the new woofer and tweeter. I hope this helps.
this is the most informational video i have found ty
Great video in great detail. Thank you very much. Installing new CT Sound Meso 2 way components and sound dampening.
You can take the door panel off without removing the switches, all you have to do it disconnect them once you have the panel loose......that's what I did when I replaced both front window regulators a few months ago.
Thx I'll remember that
Good job buddy thanks for sharing video
just a tip . if u are going with low budget speakers pioneers are the way to go.
@9:55 what are you plugging in? It looks like it's behind the speaker grill.
why you removed bracket? have any difference between bracket or direkt installation?
Why does GM make you remove the entire door panel and not just the speaker cover?
Definitely should have been a way to take the cover off only this is too much because that’s the only reason why we are taken these panels off anyway everything else works forever
I appreciate the video but you definitely worked harder not smater..IJS Thanks again
Which speaker wire is positive and negative?
I usually keep it simple solid wire is usually POS and the one with white is negative
What size speaker is the tweeter? I have the same vehicle and getting ready to upgrade the speakers.
I'm not sure what size the tweeters are I only replace the speaker in the two doors are actually the four doors the speakers are six and a half
Do you guys know what size the speakers in the rear doors are?
Since you are going from a component system to a coaxial you need to wire the tweeter in as well since otherwisevyour just getting midrange
Are you sure it's not the same signal with a passive crossover on the tweeter?
I'm about to replace mine with some components. Should I wire both the tweeter and speaker signals to the crossover?
@@CaptSlowMTB on the late 1990s to early 2000s GM trucks (refering to the suburban and silverado) the speaker harnesses are the same. All you have to do is connect one harness to a crossover and run new wires out of the crossover to the new woofer and tweeter. I hope this helps.
What size speaker is that?
6.5 i think
Nvm its smaller
All that bs can’t you can’t just take the speaker grill out wtf to
This guy got a cold or allergies? He sniffling constantly like snuffy Smith. It is very distracting.
Cocaine
What size is speakers from pioneer and how many watts?
This is “sniff” the most “sniff” annoying video “sniff” I have “sniff” every watched!!
Cambiar Las audios del chevrolet tribleizi