Took mine to a shop to install and they couldn't take off O2 sensor , they beat it and heat it and they broke it. Made me pay for the sensor +$145 on 22 ST. And the experts managed to mess up my flex pipe , I made them pay for that $167. Right on dude good content.
Dude that’s wild I’ve done a lot of down pipes some spray lube is all that’s needed one time I did have to break out my pipe wrench but that’s about it. Haven’t ever broke one or damaged one getting it off to where it wasn’t reusable.
Love the mic. This video is the best downpipe video on youtube now because its exactly how I'll be doing mine. On my back in my driveway haha. Thanks for the content, very helpful!
I love the sound of the CVFab catted downpipes with the 3" thermal R&D. Is there any risk to turbo or engine damage with this combo while leaving the vehicle stock tuned? We're getting a 2025 ST and from the sounds of it the ECU will be locked. So unless it gets cracked we wont be able to do much but the sounds of those turbos with the CVFab downpipes and the 3" thermal R&D are just too good to pass up. Do you think Ford would void warranty on turbos or engine doing this even without a tune?
You could check with the service manager. If they are weary over the downpipes maybe ask if having them installed there would help the situation. The exhaust obviously will not cause any warranty issues.
@@HoustonSpeedFreaks You don't have any concerns jacking up the center front on that crossmember? Ford indicates the pinch welds being the only safe places to jack.
Were the pinch welds damaged in making this video ? I have the same jacks and it's bending my plastic , i do have rubber protectors on them but still how do you do it ?
@@HoustonSpeedFreaks ohh got ya! Just had my rear main seal and oil pan replaced under warranty. So my eyes went straight to leak lol good job though on the install. Love all your videos keep it up 💪🏼
The worst project. Had mine at a high-end shop. They actually refused to do it and sent it to another shop. 600 for the install. The shop that ended up doing the work said it was one of the most aggravating projects they recently done.
lol it’s not easy and definitely knowing how to do it and having the right tools is the key to getting it done. I’ve gotten it done to about 1.5/2 hours
The mic made a huge difference! Awesome video as always from HSF! ❤
Thank you brother will definitely be a staple in all my future videos 😁
@@HoustonSpeedFreaksdo you need to do a tune after intercooler and down pipe back exhaust upgrade?
Took mine to a shop to install and they couldn't take off O2 sensor , they beat it and heat it and they broke it. Made me pay for the sensor +$145 on 22 ST. And the experts managed to mess up my flex pipe , I made them pay for that $167. Right on dude good content.
Dude that’s wild I’ve done a lot of down pipes some spray lube is all that’s needed one time I did have to break out my pipe wrench but that’s about it. Haven’t ever broke one or damaged one getting it off to where it wasn’t reusable.
@@HoustonSpeedFreaks yeah man , brand new car
I’m in Dallas. How much would you charge to install this? Have thermal 3 inch as well. Do you have a email I can reach you at.
@TX_FpiuIsh yes sir shoot me an email @ HoustonSpeedFreaks@gmail.com
Found my new Texas Ford mechanic going to end up emailing too when parts come in have a 24 ST in Texarkana
My back hurts just from watching this video! Good on you guys for doing the driveway jack stand demo
My back always hurts lol 😂
Love the mic. This video is the best downpipe video on youtube now because its exactly how I'll be doing mine. On my back in my driveway haha. Thanks for the content, very helpful!
Thank you brother🙏 I truly hope it’s helpful ❤️
Ack, the ground is a young man's method! Thanks, I'll be doing this soon but on a lift at our local DIY garage.
I just like do this to show people it’s possible without a lift 😅
Like the way you literally work from home. Gonna do my diy for my ST exhaust💪
Thank you brother 🙏😁
I had the same issue with the nuts that came with the downpipes not fitting the bolts for the downpipe bracket. Hopefully Jason gets that figured out.
Yeah I’ll message him about and see why can be done
This video was great! LMFAO You definitely have the same humor as I do.
Thank you brother 🙏 deep down we are all just young immature boys lol
@@HoustonSpeedFreaks you’re damn right! In my Walter White voice. 😂
😂😂😂
Beautiful jack stands.
Thank you 🙏😅
That the newer O’Reilly in Huffman? Closer than I thought. When I get ready to do my wife’s ST I’ll holler at you
You know it! I live in Huffman 😁
The 02 spacers… do you have to use those?
Yes, I’ve seen many people throw a code that don’t use them
I love the sound of the CVFab catted downpipes with the 3" thermal R&D. Is there any risk to turbo or engine damage with this combo while leaving the vehicle stock tuned? We're getting a 2025 ST and from the sounds of it the ECU will be locked. So unless it gets cracked we wont be able to do much but the sounds of those turbos with the CVFab downpipes and the 3" thermal R&D are just too good to pass up. Do you think Ford would void warranty on turbos or engine doing this even without a tune?
No risk. However, your Ford dealer may disagree (and they'd be wrong). Technically they have to prove that the DP and exhaust caused the issue.
You could check with the service manager. If they are weary over the downpipes maybe ask if having them installed there would help the situation. The exhaust obviously will not cause any warranty issues.
No it won’t void your warranty I’ve even heard of some ford dealers installing the parts for customers but of course it’s not cheap lol
Leeeeet's Gooooo💪🏼
💪💪💪
Great video. Thanks!
Thank you for watching 🙏😁
what wheels and specs are on the car? looks great!
These are velgens classic 5s in a 22x10.5 with a plus 30 offset I have them available on my website
Houstonspeedfreaks.com
How many hours did this take you Travis? Not including the pit stops lol
Just an hour 😁
@@HoustonSpeedFreaks dammm. That's fast. My shop where I take it too is quoting me 4 lol. Do you want to fly to FL lol
Any alternative if I got my aftermarket mid pipes welded to the exhaust and stock downpipes
Hey man , is there a possibility of a short on how to put jack stands under ST in those pinch welds or wherever? Thanks
Yeah I can make a video over that for sure
@@HoustonSpeedFreaks thank you, awesome
@@HoustonSpeedFreaks nevermind dude , I figured it out.
@@HoustonSpeedFreaks You don't have any concerns jacking up the center front on that crossmember? Ford indicates the pinch welds being the only safe places to jack.
@DanA-pn9ue I have no concerns at all hacking it up via the subframe
What’s the torque on the subframe bolts?
Were the pinch welds damaged in making this video ? I have the same jacks and it's bending my plastic , i do have rubber protectors on them but still how do you do it ?
No sir, the pinch words were not damaged in the making of this video. If you place them perfectly you’ll have no issues 😁
@@HoustonSpeedFreaks ok , thank you
What size swivel socket are you using on the downpipe nuts?
1/2 extensions and a 1/2 swivel 😁
What all mods you have?
What's your tire size brother? and brand of tire and rims
The white one or the silver one in this video
The white one or silver one in the video
@@HoustonSpeedFreakssilver
What is that other hose that came down too at 16:49?
That’s the transmission vent hose just tuck it back up there if it falls down 😁
Safety glasses or a face shield to keep all that crap out of your face. This is also the point where you suggest the ZL1 lift pads.😁
This is true I was using my god given safety shields 😂
How much do you guys charge for install
Down pipes $450 😁
I’ll DM you on FB
Seems like it has an oil leak going on, seen some caked on the bracket.
Yeah I mentioned it in the video and the owner is well aware 😁
@@HoustonSpeedFreaks ohh got ya! Just had my rear main seal and oil pan replaced under warranty. So my eyes went straight to leak lol good job though on the install. Love all your videos keep it up 💪🏼
@pyro1284 yeah it’s a really common leak on the explorers unfortunately I see it on a lot of them
What is the purpose for this install?
The after market down pipes are a lot less restrictive and flow much better than the oem. Thus freeing up some horse power
@@HoustonSpeedFreaks would I need that still, since I have the police interceptor version?
@RiddleStormYT you don’t need it, but it’s a want and yes you still have the oem ones that are restrictive
@@HoustonSpeedFreaks thank you, will definitely add to my list of things to upgrade
The worst project. Had mine at a high-end shop. They actually refused to do it and sent it to another shop. 600 for the install. The shop that ended up doing the work said it was one of the most aggravating projects they recently done.
lol it’s not easy and definitely knowing how to do it and having the right tools is the key to getting it done. I’ve gotten it done to about 1.5/2 hours
@@HoustonSpeedFreaks thats quick! U probably save another 15 to 20 minutes if u had a lift.
@acon815 oh easily lol