Ok, been struggling for 2 days gettins those damned pistons out with every possible tools available in a garage and this half naked guy in loafers pulls out this genius idea with barely any tools. Thanks mate
Dude, wtf, I was in the process of building some hydraulic death contraption to remove the pistons and then I've just double-checked youtube and found your video. It took me 1 minute to remove four of them. THANK YOU
compressed air, grease pump, use own car master brake pump, drilling and destroying the piston,......I have seen it all. And this brilliant guy's method is just common sense. Well done.
Another way to do it but pumping the pistons out with the brake pedal rarely fails to work. Just trap the first piston before it comes all the way out and the second one will be forced out.
@Juston K. If the fluid is only leaking slowly past the piston, pumping the pistons/s out should still work. It is the one way that works well but people seem to forget to try it before they disconnect the brake hose. Good luck.
Hahaha...ganyan lang pala kasimple...mygashhhh 😁😂 pero huli na ang lahat ... pinukpok ko na piston sa inis, d ko kc matanggal dahil stuck up na sya. Papalitan ko nlang ng bagong set. Salamat. Mag-subscribe na rin lang ako para sa susunod na mga tips.👍
Salamat sa info sir. Ng dahil sa vidio mo natangal ko din piston ng caliper ko, kakatapos ko lng gawin ngaun ung motor ko. Kung di dahil sa vidio mo di ko matatangal ung stock up na piston ng caliper. Malaking tulung tuh para sa tulad kung mahirap na walang pang paayos. Thank you sir💝
Wow! Good idea bossing. malaking tulong. ibaiba talaga diskarte ng mga mekaniko. try ko gawin din yan sa front caliper ko kasi stock up din yong isang piston nya. kaso wla akong socket haha. bili mona ako 1 set na socket wrench. di ko ipapagawa sa mga mekaniko baka gamitan nila ng plise or bisegrip. ako na gagawa kc 100% yong pinakita mong diskarte bossing.
Bossing ano magandang gawin sa caliper ko yung dalawang piston nag piplay naman kaso yung isa mejo matigas at hindi umaangat ng mataas kagaya nung isa tapos kapag nag pepreno ako yung brake lever antagal bumalik
Sir pano po b malalaman pg sira na ang piston po?kse ung sken kht ano po pump ko ayaw n lumabas ng piston ko po eh ☹️ beat fi v2 combi brake po motor ko po sir
Mate, you are a genius, struggled with this for two hours....sought inspiration from you tube and within 60 seconds had this sorted. Thank you👍.
Thanks mate😁👌
Ok, been struggling for 2 days gettins those damned pistons out with every possible tools available in a garage and this half naked guy in loafers pulls out this genius idea with barely any tools.
Thanks mate
Thank u mate 🤭
😁✌️ thank u mate
Dude, wtf, I was in the process of building some hydraulic death contraption to remove the pistons and then I've just double-checked youtube and found your video. It took me 1 minute to remove four of them. THANK YOU
☺️ your welcome dude ride safe
work smarter ka lods....galing ng technique mo...ito pinaka da best sa lahat ng nakita ku sa pagtanggal ng piston sa caliper...good job lods
Absolutely genius!
Struggling for two days with piston pliers without it budging. Used some heat and this method with alot of pulling. You legend
Thnks mate. Ride safe👌
Indeed brother
This is an underrated video. Very well done, thank you!
damn you made it so simple I was going to buy special tools to remove it with air etc.. thanks
compressed air, grease pump, use own car master brake pump, drilling and destroying the piston,......I have seen it all. And this brilliant guy's method is just common sense. Well done.
Another way to do it but pumping the pistons out with the brake pedal rarely fails to work. Just trap the first piston before it comes all the way out and the second one will be forced out.
My pistons are leaking fluid. So this trick helps then.
@Juston K. If the fluid is only leaking slowly past the piston, pumping the pistons/s out should still work. It is the one way that works well but people seem to forget to try it before they disconnect the brake hose. Good luck.
Hahaha...ganyan lang pala kasimple...mygashhhh 😁😂 pero huli na ang lahat ... pinukpok ko na piston sa inis, d ko kc matanggal dahil stuck up na sya. Papalitan ko nlang ng bagong set. Salamat. Mag-subscribe na rin lang ako para sa susunod na mga tips.👍
Great... 👍👍👍 Found my piston stucked today... Will try this technique later...
Ugh... been trying for 2 hours. Thanks! I'm gonna try this in my sandals!
Salamat sa info sir. Ng dahil sa vidio mo natangal ko din piston ng caliper ko, kakatapos ko lng gawin ngaun ung motor ko. Kung di dahil sa vidio mo di ko matatangal ung stock up na piston ng caliper. Malaking tulung tuh para sa tulad kung mahirap na walang pang paayos. Thank you sir💝
☺️👌ride safe tropa😁
Thank u brother for your tips its 100% worked ..live long life brother god saves u 100 year's ❤️❤️❤️
Idol salamat sa video mo..natanggal ko na din sa wakas itong piston ng rear brake ko..nakasubscribe na ako idol..salamat ng marami sa dagdag kaalaman
Salamat sir... Itatapon ko na sana caliper at bili bago... Buti nalang napanood ko to.
Wow! Good idea bossing. malaking tulong. ibaiba talaga diskarte ng mga mekaniko. try ko gawin din yan sa front caliper ko kasi stock up din yong isang piston nya. kaso wla akong socket haha. bili mona ako 1 set na socket wrench. di ko ipapagawa sa mga mekaniko baka gamitan nila ng plise or bisegrip. ako na gagawa kc 100% yong pinakita mong diskarte bossing.
☺️👌 dapat bantayan ntin pag gingwa ng mga mekaniko ung motor ntin🤣 rs. Paps
Wow maraming salamat kuys ❤️ Ito Yung technique na hinahanap ko talaga Sana gumana sakin
☺️ gagana yn sa lahat paps.
Thanks dude. I was looking for it.
ikaw ang kasagutan sa aking katanungan.
salamat sa malupit na diskarte bossing
Thankyou 100 times, ive spent all day trying to get mine out but now I know.
Thank you sir☺️👌 just sharing my knowledge to others ☺️👌
Yown galing ma try nga tagal ko na tong problem lods🥰🥰
Fantastic video works a treat. Thanks very much
Salamat sa idea boss yan rin problema ko kahapon lang...nice god bless
Salamat boss...bibili n sana buti npanood kita
Nice idol galing .hirap ako magtanggal ng piston sa motor ko..ma try ko din yan,.full support my friend..
Salamat paps☺️👌
Ang galing Ng technique mo sir.
Ang galing galing niyo po sir. Maraming salamat sa tip.
Naipit na yung socket pano naman tangalin yun sa loob ng piston
Buti na lng napanood ko ito... Muntik ko ng ipalo sa kapitbahay namin tsismosa yng brake caliper ko akala ko wala ng pag-asa....😀😀😀
😂kung so maritess yn mas magnda 😂✌️joke
Great technique 👍👍
Thank u bro☺️👌
Boss yung pinasak mo na socket bka naman yun yung mas mahirap tanggalin
Galing mo idol sa idea mo natanggal ko nga salute to you!
Aus tropa😁 ride safe palage☺️👌
Panalo. Galing.
Very Cool Thank you So much Saved me hours
Strugle ka nia sa pag aalis ng socket sa loob ng piston hehhehe..
ang galeeeng... subscribed!
Galing talaga tuts din po sa pano tanggalin ung nilagaya😭 diko matangal
Very helpful, thanks!
Thanks paps!! natanggal ko din sakin. 😂
Wc paps😁
Perfect 💯💯
Well done. Now how to take out the 2 nuts from the caliper piston?
hehehe hirap tangalin yan for sure
You are a genius but please explain in English so we understand what you are doing
Slamat idol... lupit mo...
BRILLIANT BRILLIANT BRILLIANT!! Thank you!
Your welcome mate☺️👌
Samalat master,malaking tulong to hehe
Great
Nice idea thank you mu friend
Gantong technique ang dimo makikita sa ibang mekaniko.salamat idol
Salamat paps😁 ingat sa pag papagwa kc ung iba shortcut🤣
the problem now is how to remove the allen wrench and the socket wrench from the piston caliper.
Maybe just replace the piston
Ang tanung naman sir panu tanggalin ung mga nilagay mo po na socket wrench kasi para mahigpit ung pagka pasok ng socket wrench
Thank you my friend
Excellent!!!!!!
Bossing ano magandang gawin sa caliper ko yung dalawang piston nag piplay naman kaso yung isa mejo matigas at hindi umaangat ng mataas kagaya nung isa tapos kapag nag pepreno ako yung brake lever antagal bumalik
champion
So easy no grease guns and sir pipes.
very clever
Thank you bro!
paano naman boss matangal ung sucket at allen sa piston diba nkasiksik un? ty
Sir pano po b malalaman pg sira na ang piston po?kse ung sken kht ano po pump ko ayaw n lumabas ng piston ko po eh ☹️ beat fi v2 combi brake po motor ko po sir
subscribed! idol, ano puedeng gamitin pang tanggal sa kalawang sa piston?
Babad mo lng da wd40 then liha ka 1000 and 2000 okey na yn😊👌
Nice Idea
anung size yung nilagay mo na socket dyan boss
Pag nabunot ba yung Piston boss masisira na? Stuck up kasi akin baka pwede bunutin tapos linisin baka makuha sa ganun
ty lodss haha sobrang basic lng🤗👌
Rs paps😁👌
galing mo brod😂😂😂
😂
Ayus idol solido
sir paano po ba tannggalin allen? di na natanggal sakin
Hello po. Magkaparehas lang po ba ang sparkplug na A7TC at C7HS na sparkplug? 😊
Philippines?
Taena gumana nga, niceeee
Galing :)
nice lods galing ah
Thnk u lods☺️
does not work on my car
👍👍👍⭐⭐⭐⭐⭐
Nagawa ko, kaya Lang Hindi ko matanggal ung nakaipit na socket 😁
It would be better this guy use a bench vise
Location mo bro
Panu naman tangalin na ak socket? Haha
Ang problema Pano na naman Tatanggalin Yang binaon Mo Sa piston ng Caliper? hahahahaha ang tigas Na nyan Ee haha
😂
boss salamat.
npabilib mo rin mga kano boss
Salamat po boss .. ride safe sa atin👌
shout out dun sa ga kinginang gumagamit ng pliers at vysegrip
Galing mo
Salamat po😁👌
San location mo?
Boos Yung Yung isang brake mo dyan sa baba diko Kasi natanggal Yung tornilyu nya
Alin turniyo paps?
Talino mo pre👍
Hindi po mariririnig boses mo poAa
Bkit sa kin pababa ikot ng piston
Paps ung pwersa mo dapat pahatak hindi pababa.. pag pababa gnun mangyyre☺️
@@ikabodbudwit ok na salamat
Petmalu
Salamat po☺️👌
Idol salamat sa video mo..natanggal ko na din sa wakas itong piston ng rear brake ko..nakasubscribe na ako idol..salamat ng marami sa dagdag kaalaman
Salamat din paps😁👌 rs plage