I had the OEM fogs added to my Si back in '99 when I purchased it new. I also removed the "H" emblem because I felt it gave it a more JDM look. Man, I do regret selling that car...thanks for making videos of the classic Honda and Acura cars from back in the day!
The front emblem removal is literally an EM1 owner right of passage. The best "free" mod you can do to change the look of the entire front end and pretty much everyone took them off/threw them out back in the day. I prefer mine without and I hate to say this but...I think you may have re-installed it one "layer" too high of center. It also would really complete the front of the car to slap some licence plate plugs on there. It looks like the metal slugs behind the holes were gone but I'm sure a little hot glue or epoxy would keep them in.
I got my em1 brand new in high school 20 years later still have her although not really road worth in over 10 years . Those black floor mats were not available while the ek chassis was out but came out around 2005 . Years after production of the car
Super clean install, that was one ofbthe first mods i did to my ebp em1, factory fresh floor mats, I need that front tower bar looks like he kept the factory part # sticker on it which means he found it new some how. Clean build.
@@ahcgarage i was able to find it overseas in the UK for a 92 civic vti but same discontinued part number here in the States, so I copped. Hope it ships!
I definitely like the Emblem on the Mesh Grille, I am not a fan of stripping logos on car's at least not the Main Ones. How were you able to attach the emblem to that mesh grille that I will be installing? Is there a kit?
Not to nit pick but those are not the factory floor mats that come with the car. Anyone who has owned an Em1 or rather any 96-00 civic will say that. The floor mat fabric will match the carpet which yours clearly doesn’t. Also your grille H is a bit crooked. Just sayin
Always wondered if these were some kind of secondary OEM floor mats? I was lucky enough to come across a new set of the "real" oem floor mats on Honda-Tech back in 2011.
Missing the ground strap on the front driver side valve cover bolt? Sure wish I could find new OEM floor mats for my Integra. My original front driver side one is beyond tattered!
Very nice guys, those light brackets look a bit over-engineered but defiantly well made, so is that carboard box a Honda approved device for holding the bumper when you refit it? if so I need the part number and price as I can't find it anywhere! 🤪
@@ahcgarage i’m from the uk, so most older parts have been discontinued here sadly. would you happen to know anywhere in the US that ships internationally?
Sorry Mikey. Gonna side with the customer on this one. I love 99-00 SI's with that emblem in the grill. Makes it look so clean off the show room floor looking..
I’m probably the only person saying this but I found the OEM Fog lights for my 03 Pilot EX-L it didnt come with any from factory and I seen one with them installed, is there a website I could go to to get information, thanks in advance
What paint code is that? I have a 92 legend that this is going to look crazy on....if anybody out there knows this color code or mixture let me know please n thanks
For AHC Garage Apparels and Merchandises:
acurahondaclassic.com/
It was in great shape. Owner probably wanted the b16/Type R valve cover that was originally supposed to be on instead of the GSR valve cover.
I had the OEM fogs added to my Si back in '99 when I purchased it new. I also removed the "H" emblem because I felt it gave it a more JDM look. Man, I do regret selling that car...thanks for making videos of the classic Honda and Acura cars from back in the day!
Thanks for sharing with us!!
Love the jamaican flag in the mirror, shout outs to all my Caribbean ppl you heard!🇬🇾🇯🇲🇱🇨🇹🇹🇧🇸
Blessed!!!
Yadie
Respect
Did I miss something? The old valve cover looked like it was in great shape!
Owner probably wanted the original B16/Type R valve cover instead of the GSR
Lmfao I thought I was just seeing things but I’m glad I read your comment cuz I saw no difference in either valve cover 😂
Did the fog lights plug into existing harness or did you re wire full harness - wish you went bit more in depth on this
Em1 vibes 👌👌
Yes!!!
This was such a satisfying experience to watch! Ty AHC!
Thanks for your support
The front emblem removal is literally an EM1 owner right of passage. The best "free" mod you can do to change the look of the entire front end and pretty much everyone took them off/threw them out back in the day. I prefer mine without and I hate to say this but...I think you may have re-installed it one "layer" too high of center. It also would really complete the front of the car to slap some licence plate plugs on there. It looks like the metal slugs behind the holes were gone but I'm sure a little hot glue or epoxy would keep them in.
Great catch. We installed both the bracket and license plate caps after we filmed our video. Those parts took longer than expected to arrive
Nice video on the OEM fog light installation! The H front emblem looks good too....
Thanks 🙏🏼
I got my em1 brand new in high school 20 years later still have her although not really road worth in over 10 years . Those black floor mats were not available while the ek chassis was out but came out around 2005 . Years after production of the car
Super clean install, that was one ofbthe first mods i did to my ebp em1, factory fresh floor mats, I need that front tower bar looks like he kept the factory part # sticker on it which means he found it new some how. Clean build.
Yes the front strut bar was new and purchased over a year ago
@@ahcgarage i was able to find it overseas in the UK for a 92 civic vti but same discontinued part number here in the States, so I copped. Hope it ships!
👍🏼👍🏼
One of my favorite cars and color. Great job on the install of the fog lights 👍
One of our favorite as well
Nice. Makes me miss my EM1.
👍🏼👍🏼
The most satisfying part of this video is the use of OEM panel clips
👍🏼👍🏼
Still one of my fave oem rims. Have them on my eg8 civic
EM1 wheels are one of our favorite
Of course with amblem 👍🏻👍🏻👍🏻
It looks a lot better with the emblem . Beautiful vehicle and the blue color Wow!!!.
Electron Blue Pearl is sharp
I was hoping you will turn on the fog lights
If I were to use an emblem it would be the type r's, in my humble opinion it accentuates the blue better.
Great choice
Clean em1. I prefer without the emblem.
👍🏼👍🏼
I like it with the front H emblem 👍🏽 more of a OEM look.
I definitely like the Emblem on the Mesh Grille, I am not a fan of stripping logos on car's at least not the Main Ones. How were you able to attach the emblem to that mesh grille that I will be installing? Is there a kit?
Not to nit pick but those are not the factory floor mats that come with the car. Anyone who has owned an Em1 or rather any 96-00 civic will say that. The floor mat fabric will match the carpet which yours clearly doesn’t. Also your grille H is a bit crooked. Just sayin
Always wondered if these were some kind of secondary OEM floor mats? I was lucky enough to come across a new set of the "real" oem floor mats on Honda-Tech back in 2011.
The car is mintttt
Gawd do I wish my ek ex was an si
So clean 😭
Thanks 💯
Nice. Love em1
Us too 👍🏼
It’s too bad the switch is not color matched to the SI black panels. Awesome install vid 👍👍
Thanks 🙏🏼
Missing the ground strap on the front driver side valve cover bolt? Sure wish I could find new OEM floor mats for my Integra. My original front driver side one is beyond tattered!
The ground has been relocated since the car has a harness tuck. OEM Integra mats are very hard to find now a day
Where could I buy these?
Love the b rolls
👍🏼👍🏼
I wish you guys would do a 02 - 04 rsx oem fog light installation.
We will put it on our future video list. Thanks for the recommendation
Thanks Mike👍🏻
Wait!! @AHC Garage. In the video. You didn't put the the spark plug seals in the new valve cover!
Hey if y’all want to ever use my beats let me know ! I love your videos
Very nice guys, those light brackets look a bit over-engineered but defiantly well made, so is that carboard box a Honda approved device for holding the bumper when you refit it? if so I need the part number and price as I can't find it anywhere! 🤪
The box is AHC Garage approved, haha. We have to improvise when you don't have an extra hand.
I like it without the emblem. But why change the valve cover? It looks the same.
So I already have the front harness that connects to the oem fog lights. Where can I get the oem inside harness?
Are there still oem foglights for 92-95 civic sedan in US?
Unfortunately they all have been discontinued
AHC Garage Thanks! Its really hard to find fresh foglights here in the Philippines. Btw that foglights on EM1 completes the front. 👌🏻
Hey Mike where did you buy the OEM fog light Kit I cannot find it online?
Where did you guys find OEM fog lights? I searched and searched with no luck so went with ebay rep fogs for my 99 ek sedan
Think I would of painted the fog light covers black to match the grill
That's a great idea!!
Did the Si come with those floor mats or the mats that have "Si" in red on them?
The black replacement mats are reproduction Oem item. The original EM1 Si mats are light grey and do not have Si logo on them
Where can I get a pair. Mine are oem but the glass is cracked. All I find is aftermarket.
The emblem is slightly too far to the passenger side.
Another great video!! Just curious where the owner found these oem accessories. Everywhere I've searched it's "discontinued".
They were purchased through our local Honda dealership a few months back
Man I wish you slowed down and showed us how the fog lights assemble
Wear did you get the oem foglight kit???
Thier discounted everywhere online.
We bought them before they were discontinued
excellent work I would like to know in which store to buy the parts for honda civic thanks
We have the parts in stock
do you guys have the part number for the kit?
08V31-S01-103
@@ahcgarage thank you! is there any place that I can order from? cant seem to find it online
Where can I get this genuine fog light kit? Isn’t it discontinued?
What is the best fog light kit to get it from thanks
Clean
Agreed!!!
thank you for this video!! do you know where i could order one of those emblems for my front grill? thank you!
The front emblem is still available from your local Honda dealership
@@ahcgarage i’m from the uk, so most older parts have been discontinued here sadly. would you happen to know anywhere in the US that ships internationally?
Where did you get that Emblem?
Your local Honda dealership
Where you get the OEM kit?
The Kit came with the car. They have been discontinued from Honda a few years ago.
I am from Pakistan i have Honda Accord cl9 2008 i need the modifications
i am your fan
Thanks for joining us
I like it with the emblem. Came out great!
Thank you!!!
If you read this, would it be possible to get the Part Number for this Foglight Kit? can't seem to find it, I appreciate you guys!
Here you go bud:
08v31-st7-201
@@ahcgarage I really appreciate that! You guys put forth so much effort to engage with your subs, thanks a lot!
You’re very welcome
Where did you get this fog light kit from? Which Honda dealer if so? Thanks!
Where did u get the emblem mount?
Sorry Mikey. Gonna side with the customer on this one. I love 99-00 SI's with that emblem in the grill. Makes it look so clean off the show room floor looking..
Right on!!
I’m probably the only person saying this but I found the OEM Fog lights for my 03 Pilot EX-L it didnt come with any from factory and I seen one with them installed, is there a website I could go to to get information, thanks in advance
Are you looking for the Installation instructions?
AHC Garage Yes I can’t find them, someone told me I would have to change the turn, and headlight stalk on the left side of the steering wheel
Shoot us an email, once we find it, we will email it to you
AcuraHondaClassic@gmail.com
AHC Garage i sure will, again thank you so much
There was no ground on the valve cover?
It has been relocated
I like it without the fog light, it's cleaner without
Fair enough :-)
Where can i get a set of oem fog lights
They have been discontinued from the dealership
SI wing install next?!?
Yes!!!
That dude is from paint society
Emblem sorry Mike
Cheers!!!
A black fog light switch would have been better. Still, nice video how to.
Agreed. The grey switch was the only color available
AHC Garage Near impossible to find
Definitely no H badge Move the videos and most of all Honda’s!!!!
👍🏼👍🏼
keep the emblem on!!!
Yes!!!
What paint code is that? I have a 92 legend that this is going to look crazy on....if anybody out there knows this color code or mixture let me know please n thanks
b95P Electron Blue Pearl
@@B95_P thanks
I need oem factory mats were can I get some
They should still be available from your local Honda dealership
Better get on eBay they’ve been discontinued for yrs...
eBay is a great place too
MY HONDA ACCORD IS SAME LIKE AN ACURA
Bet that motor was puking oil into the spark-plug plugs and wires
Without. Made the front so much more aggressive
So you’re not gonna turn on the fog lights…
without emblem!
Sub for more Honda content yay
Thanks for joining us
NO EMBLEM!
👍🏼👍🏼
Emblem = Si
No emblem = EK9
It’s a beautiful car but muthafuckas are quick to steal these it’s a damn shame 🤦♂️
Car looks ugly with those fog lights