Honda EK9 CTR Refresh Build - Installing New Tein Coilovers | Brake Refinish | Alignment (Episode 6)
Вставка
- Опубліковано 19 лют 2021
- In this episode of this series, our team will be installation a set of brand new Tein Advance-Z coilover. Along with that, we will also refinish front and rear brake calipers, rotors and along with a set of brand new Oem brake pads. We have step-by-step instructions so you can do it right at your home. Lastly, we finished this refresh build series with a 4-wheel alignment.
As always, tips and tricks come standard on every episode.
Brake Caliper Refinish Material:
Dupli-Color Ceramic Aluminum Paint - amzn.to/3uAKuid
Simple Green All-Purpose Cleaner and Brush Kit - amzn.to/2Y3dl2Q
3M Masking Tape - amzn.to/3DbLX1x
Brake Caliper S Hooks - amzn.to/3F4NAjh
Meguiar's Ultimate Quik Detailer 24oz - amzn.to/3oASZZl
Microfiber Cleaning Cloth - amzn.to/3BuDYfa
Special Tool:
DIY Brake Bleeder with Magnet- amzn.to/2ZIRazl
Milwaukee 3/8 Impact Wrench M18 - amzn.to/3ugHcAa
Milwaukee 3/8 Variable Ratchet M12 - amzn.to/3kMRlSm
Milwaukee Magnetic Flood Light - amzn.to/3icv5PP
Milwaukee 1/4 screwdriver M12 - amzn.to/39KuDUx
Filming Gears:
Go Pro 9 - amzn.to/3CKUuYO
GoPro Media Mod - amzn.to/3oc0SnT
GoPro Light Mod - amzn.to/3i77MXR
Canon M50 - amzn.to/3CN2I2L
Canon EOS M Mount Adaptor - amzn.to/2XW7xIp
Canon EF 50mm - amzn.to/2XW7497
Canon EF-M 22mm - amzn.to/3CPN9XV
Canon EF-M 11-22mm - amzn.to/3m1Dx5Q
For Acura Honda Classic Apparels and Merchandises:
acurahondaclassic.com/
If you have already, please follow us on Instagram to see sneak peaks ahead of time!
Thank you to our exclusive sponsor: Acura of Pembroke Pines
www.acuraofpembrokepines.com
Follow us on
Instagram: @AcuraHondaClassic
Facebook: Acura Honda Classic
Acura Honda Classic established in 2018, is a group of Acura/Honda enthusiasts set out to bring together the car community through Acura/Honda vehicles of the 80s, 90s and today. We strive hard everyday to "Building Our Community". Follow us on IG @AcuraHondaClassic to stay up to date on our news, events and activities. - Авто та транспорт
For AHC Garage Apparels and Merchandises:
acurahondaclassic.com
@AHC Garage, seriously.. this is like a freakin' dream job. Fixing up hondas and getting all the damn rare ones to look over, dude what a life~
@Forrest Vicente STFU
What type of exhaust do you have on this civic?
I watched the whole series,a truly amazing job. The music gets a bit annoying though, I'd prefer to hear more commentary instead
I would be a nervous wreck if I had to park a classic like this out of direct sight for more than 20 min. Gorgeous build guys.
Thank you!
All in the Details are the ones that count. Nice work!
Yes! Thank you!
Mannnnnnnnnnn you almost lost me at painting the whole rotor.....lol Glad I watched the rest of the vid haha
Thanks for watching
Wonderful job! This was quality spent 30 mins! Looking for another episode! Keep up the great work!
Amazing job. Super clean. You guys do amazing work.
Thank you very much
Good job. I like your style to pay attention to every step in details. that’s so incredible. I love it. 👍🏻
Thanks for the compliments
As a technician myself I think you did a very nice job. Your shop is very clean!!
Love the attention to this Civic , very good job 🙌🏾🙌🏾
The owner must be pleased with this job.!!
Thank you 🙌
I’m surprised the owner didn’t want the rotors replaced but awesome job on the resto !!! You guys have passion for your craft we need guys like you in Las Vegas
Rotors were still with service limit. Resurface them serves the same purpose
Loved this series. Good job guys!
Thanks for your continued support 👊🏼
Always a pleasure watch Mike and the team can't never miss an episode, can't wait to go meet them i person 💪🏼💪🏼 keep it up fellas
Thanks Jim. We appreciate your support as always
Superb workmanship! Very clean and professional workshop 💯💯💯
Thank you very much 🙏🏼
Absolutely stunning!! great work guys!!!
Thanks a ton
You should also let everyone know that they have to get an alignment after any ride height changes.Nice clean install.
Mike knows what’s up! Great job man!
Thank you for your support
Exact same coilovers I got for my Integra GSR! Good stuff 👍🏼
Right on!
Stumbled across your channel, great content !! Man that car is so clean
Thanks for the sub and welcome!
man i love the clean look of this car in and out… not a fan of right hand drive but i would make an exception for this bad boy 🎉
Cheers!!
Looks incredible top job 👍🏻👍🏻👍🏻👍🏻
Thank you! Cheers!
Great job Mike car looks great and I would imagine it drives better as well. John UK
Thanks John. Much appreciation
Love the build keep up the good quality work guys @AHC
Thanks so much
Best civic ever made!
I really like honda ek9 . From malaysia👍😍❤
Us too!
@@ahcgarage I like watching your videos. You are all the best. I am from Malaysia👍👏❤
That car is beautiful. Would love one in this sort of condition.
Right on!!
You do some nice work!
Thanks for your compliment
Perfect timing 👍🏼 ⏱
Enjoy!
Wow... you have lot of cool cars !! I wish I can be owner of that car...
Like the TEIN suspension👍
I use for my Lexus. Lowering the car at the right height and still more comfortable ride than normal suspension in my opinion.
Thanks for sharing!
One word. Amazing 👍
Thank you very much!
One if the most iconic civics
Agreed!!!
Beautiful. Just beautiful…….
I’ll take the old coil overs please 🙋🏻♂️
You won a new suscriber, good job and really nice car i love it
Thanks for the sub!
Brilliant work keep it up 👍
Thanks so much
Simply the best....AHC Garage !
Thank you 🙏🏼🙏🏼
Good work
Honda for life
Facts!!!
Very nice... D best AHC Garage...
Beautiful ride
It sure is!
Wow. That was clean....
Appreciate it
Very good quality video!
Thanks for watching!!
DOPE intro and music! I LOVE THIS CTR HATCH! Too bad we didn’t get a LHD one in the states! What a toy! If old Civic Si hatches can bring $18,000 then this is $50,000 at least lol.
Thanks for the support 🙏🏼
Spoon just restored one...they're asking $75k for it!
such a beautiful car!
We agree!
Dang I love how easy it is to remove Honda suspension, especially the GEH cars. Surprising to see the forks on the rear shocks. I thought CTR had the same type of LCA and rear shocks with the eyelet bushings like ITR’s.
We love working on them, as most people also. And yes, to mostly people surprises, EK9 has forks for the rear LCA. Wish they would do the same as Dc2
True jdm. Right hand drive
This video satisfies my OCD and love for Type R. Strange that someone installed DA suspension. I swapped out my like new Tein monosport for Spoon springs and struts because I found them far too firm for street use. I was concerned about paint on the rotor discs until you turned them. I got an Acura ad during this video but sadly it was the short version that didn’t show the ITR!
Thanks for your continued support
Gorgeous
Cheers!!
I recommend changing the rotors... Ovetime there are getting thinner which would cause safety problem...i have a ek9 too i replaced them with Delios.
Agreed, new also good. The rotors were way above service limit, which mean they will be safe.
sweet lookin ek how do these compare to the flex z
Love it.. 😍
Thank you! 😊
Nice hatch
I think so too!
its legendary car :)
What paint did you guys use for the rotors ? Iam gonna restore my rotors as welll !
owner should just go all out with spoon calipers! would really pop with those wheels
Great point
This is awesome, I would love to see a 2018+ Honda accord build with upgrades for ultimate street car like a type R version and one for the track... would be nice especially if you work with bisimoto, Mugen Racing, etc
That would be cool!
Nice
So good
Cheers!!
How did they get the car into the country? If this is a true 1997 EK9, then it wouldn’t be available to import until 2022. I’d love some insight because I’ve been trying to get ahold of a legit RHD EK9 Civic Type-R.
Very good
Thanks
awesome
Thanks 😊
You guys should start using fender covers. Otherwise great videos and keep up the hard work!
We have some nice fender covers coming. Thanks for your support
God the track in this vid..so good. Keeps me watching the entire time. What's the name of the song from the @2:23 until @14:00 minutes?
I would love you guys to work on Honda wagon 91.😁
This thing is dope! What are those tires? 205/50R16?
Hi there.. awesome work...may i ask how many clicks did u adjust for the front n rear coilovers dampening adjustment
12 clicks from the softest setting
Some spoon sports front calipers & rims would do it for me. But nice build. Wonder why he just didn’t go with the Tein’s with the complete set up with adjustable top hats?
Availability was the issue but there’s also room for upgrade later 👍🏼
what did you guys do with the old headlights? forsale
What was used for the respray on the factory calipers? Im digging that silver finish.
By Wurth
Beautiful car 👍
Thank you! 👍
Wow not only is your work Awesome but that garage is clean. What did you use for paint my Lexus IS300 could benefit from that.
Thanks for watching!!
@@ahcgarage what did you use for the paint on the brake calipers and rotors?
very rare collectible car
Yes!!
One of my dream cars . Not too many people notice the difference in the faux carbon trim on the RX compared to the regular R. I doubt he would want to cut the front bumper but oem jdm yellow fogs would look amazing on it .
That’s a pretty big commitment to cut the Oem bumper for the Oem fog lights but you never know once the owner finds the itch for more Oem+ goodies
Beautiful car
It sure is!
Wow! Mike, can I ask what was the process when you scraped the disk? And why was it necessary?
We did that because the rotors were slightly warped
Great work!! 💯🙌🏽 where can i get tein suspension?
Shoot us an email:
AcuraHondaClassic@gmail.com
let me know..whar rim are u using sir?? Work?
Any issues using chrome sockets on that Milwaukee impact? Ever shatter a socket?
We only use it to tighten down the fasteners. Chrome sockets are not designed to do high impact work. Impact sockets will do a much better job
Looks good, personally I would have opted for new rotors and pad hardware. Can you share the brand and color of paint you used?
The spray paint is from Wurth
Hey guys, love your channel. I wondered is this the “Wurth high heat metallic aluminum”, “Wurth high heat aluminum”, “Wurth silver wheel paint” or something else? I see what looks like an engine image on the can, but they only make a black engine enamel. Trying to recreate that OEM finish on my 31k original mile 1990 Integra. Thanks!
Liked, commented and subscribed by the way! Keep it up!
The Wurth paint is no longer available, however we found a substitute. Use Dupli-Color Engine Enamel DE1615 Aluminum
完美!
Cheers!!
Hi guys where did you get the rubber siding ang molding for ek
We have them in stock
who made the beat?
Do you still have all the old parts? I would like to buy all of them.
Which settings did you use for the alignment?
thank you
and also ride height
What do the slide pins come with from factory, Moly or Silicone? Thanks!
Moly
Really? Moly eats the rubber boots over time. Should be using silicone paste.
🔥
Hi. What spray paint did you use for the rotors
Dupli-Color DE1615
Woww tein coilover, nice!
I want the tein coilover for my honda fit, but not yet to realitation until now, hehe
How many prices for Tein coilover on there?
Btw nice video dude!
Thumbs up from Autotune Indonesia...
Check out this site for these Tein products:
www.VelocityShop.com
How much this honda now??? Super car! 👌 ☺
i need some help. is this GSH98-9USS2 ? is this low/medium settings ? Thank you
What is that reference to?
@@ahcgarage about suspension settings on these TEIN' which im about to buy.
i need something for the street(slovenian country roads)
What spray paint did you use?
SEM paint
The cars you guys mod do you sell or are they customers rides
These are client vehicles.
Hey where can I purchase the wurth spray paint can’t find it anywhere thanks
Same here 😂
What is that malaco grease you were using?
It's a brake grease which helps lubricate the moving brake components
@@ahcgarage it is a Honda only brand? Is it something you can buy over the counter? I’ve been using a silicone grease but I’ve wondered what factory Honda uses.
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
whats this music its bumpin
🤤🤤🤤🤤🤤 those are my thoughts lol
Thanks for watching
How much mm or fraction of an inch will be removed during rotor skimming?
We measured the rotors prior to resurface them, then remediate them again to ensure the thickness is still within factory specifications
@@ahcgarage I mean normally how much thickness does skimming removes?
How much did it cost to fix?
Depends on how far you wish to do