You can switch to a linear rate spring if you mess with preload since the spring rate will not change with the compression of the spring while preloaded
This was awesome! having friends that can stay with you doing this kind of stuff having a beer test-driving in the morning uhh! pandemic is a shit! New subscriber here!
@@3uzDion when people say bone stock they refer to the engine. Actual performance mods. Therefore it’s still stock. If you want to say it’s not stock cause of some wheels that’s okay buddy but wheels and some cheap ass coilovers aren’t real mods buddy.
@@wilsonrosales6410 if you used your eyes and actually read my previous comment I was implying that I was talking about performance. You can do anything you want to the outside and make it look good but if you don’t do anything with performance it just makes you look like a ricer. Shit boxes with ebay coilovers aren’t builds.
I love how you staged you're absolutely unique comment. I've never once seen a "Nobody: Not a single soul:" setup ever before on UA-cam in the comment section... 😒
The last time I saw one this clean was in the parking lot of a Best Buy it was white lowered on some BBSs with a small chrome peashooter with a slant cut tip. You know side note for those people that think the modern stance build is not innovative enough compared to the old days of totally riced, fully fabbed, sponsored show cars just throwing some wheels coilovers and a wrap on a stock car that probably still has the warranty is called "a build"... This is actually closer to the grassroots Spirit of low riding. Friends and family taking the old family car putting nice wheels on it and dropping it as low as they could get it on a mechanical suspension for as cheap as they could.
I've noticed every time I've lowered a car, the front is always a couple inches taller than the back. It's pretty annoying and I've dealt with it with just about every car.
Omfg I was looking for a video to see if preload changes height and I gave up last night and I randomly was watching this video and found my answer you guys are awesome🙌🏼love the car community
Watched this video on a whim and holy crap your quality is insane. I'm about to start modding my 2000 Civic EX and this video got me readyyyyyyy asf for it lmao
@@doublee4930 yes I had to fender roll and 5 degrees of camber because of the 0 offset. I didn't want to at the beginning but once your there might as well go for it.
Não falo e não entendo english! Mais estes hondas são a perfeição dos carros STANCE e o estilo do momento Atualmente estou montando um Corsa b me inspirando na gringa por montar carros em casa 100% feito por mim Parabéns pelo carro muito top
Should have put that $ time and effort into the power plant . Now you have a half a low rider slammed JDM style bone . A Honda fit will drag you and your 18” rims . Thanks for posting
What spring rate are those springs on the coilovers? I’m running 32k in the front and 40k in the rear with bc racing br series extreme low coilovers in my 2010 civic and it’s waaaayyyy too stiff. Any recommendations on spring rates?
And that fender rolling tool I use it all the time on my circle track asphalt outlaw latemodel to roll the wheel openings on the thin aluminum pre colored sheets we get from roofing supply store that we bend cut bead roll and rivet but this roll tool is a game changer in the look to make my cut ots look more smooth I usually just cut sections and bend the tabs around to smooth the openi gs and round them until this the way I was doing it looked great everyone does it that way now they all use the tool for any oval track car body that is aluminum
crazy how you only have 3.7k but the quality in terms of production on this video is really solid
Thanks dude 🤙🏻 3.7k is a lot for me considering I only hit 1k 3 weeks ago lol
@@AlexMelnik only going up from here my guy, keep doing your thing!
6 days later at 6k
Honestly
That's the car I drove in need for speed underground 2
This is the kind of camber that I personally like. It's not crazy, and it wont completely destroy the car, and looks dope 🔥🔥
I agree
Probably the best stance video I have seen in a very long time. Short and sweet. 👏🏻
Thank you 🙌🏻
crazy how wheels and a drop make a car, so many people do cheap ass mods that are so tacky. but this is all you need! clean and simple. looks great
“Cheap ass kids” they put rep wheels. I think that qualifies for cheap shit lol
Lmao. Stance people talking about how some people are tacky.
@demonhydra stance is rice.
@@youtubecomments5951 we do not care old man
@@ceedot2578 ok riceboy
Just woke up at 1 and was wondering, hey how do I stance a car? You the first to pop up. I enjoyed this!
😂😂 thanks!
5 am for me 😄
cap
vv
1.13 am for me
I wish I had friends that could do this for me in 4 hours 😭
DIY
friends?
I would say come to me ill do it for you i work on cars and my own 2 cars
Where u located I have a team does this for fun
You want someone to ruin your car and the way it handles and rides? I'll be right over with a sledgehammer. It'll take me about 60 seconds 👍😑
I'm more impressed with it being 8 pm and still having another hour of daylight 👏
But nice civic. I miss my EF 😔
Dude I could stance a car in 1 minute, "shoots suspension to lower car" see
#GTA5
Lmaoo ong bro
Yea so i just tried that 😒
goat there's different ways to stance just search it
Gta-4
I would do a little less camber on the rears or get some spacers so it pokes like the front ones but it looks amazing bro
this was fun to watch cause it's only two dudes at the house. the editing for this wrapped it up nicely.
Wow, the older civics don't disappoint!
You can switch to a linear rate spring if you mess with preload since the spring rate will not change with the compression of the spring while preloaded
Miss the being in the Honda game ! 😢, car is looking beautiful! Great job boys 🙌🔥
Она будет крассивой даже спустя 50лет! С сегодняшнего дня! Респект Американцам за любовь к ХОНДЕ!!!
“ let’s jus do this the right way” not a second later “ just send it” 😂😂😂😂😂
Yo... that little floor jack trick you did was pretty cool, thanks for that!!!
It comes in clutch! Haha
On the front shocks if you want more low take off 2 of the 3 locking collars, you’ll get another half inch of drop
This was awesome! having friends that can stay with you doing this kind of stuff having a beer test-driving in the morning uhh! pandemic is a shit! New subscriber here!
This video helped me stance my 2000 honda civic four door hardtop, This video helped a lot!
Damn I wish I had some relatable friends like yours, none of my friends are that interested in cars 😂
You just made your life a whole lot more complicated but you gon look cool living it 😎
You guys seem hella chill. My kinda peeps I like right here!!! I subbed!!! Great content man.
Thanks a lot bro! 🤝
Damn, car looks fire and the shots are fire!
Love this! The guy is super humble!
That civic is clean af, zero rust damn
"Send it!"
*sends oil pan into speed bump*
Ah the car life💀
@@trendyuchiha2093 *stance life
Now this.. is both entertaining and informative. Sweet!
Glad to see some Slavs in the game , good quality videos, keep it up ! Subbed
“Bone stock to this” *still stock*
yeah
*doesn’t know the definition of stock *
@@3uzDion when people say bone stock they refer to the engine. Actual performance mods. Therefore it’s still stock. If you want to say it’s not stock cause of some wheels that’s okay buddy but wheels and some cheap ass coilovers aren’t real mods buddy.
@@justaturtle6790 did it come with coilovers ? I dont think so, so its not bone stock. Come on man use ur hear for a bit 😂
@@wilsonrosales6410 if you used your eyes and actually read my previous comment I was implying that I was talking about performance. You can do anything you want to the outside and make it look good but if you don’t do anything with performance it just makes you look like a ricer. Shit boxes with ebay coilovers aren’t builds.
God I wish I had friends that could do this to my Bimmer in 4 hours dam 😂
Do it yourself bro it’s not hard
Drop and wheels make a huge difference
Nobody:
Not even a Single soul:
Alex: we not about that bacon life Lmao haha😂
😂😂
I love how you staged you're absolutely unique comment. I've never once seen a
"Nobody:
Not a single soul:"
setup ever before on UA-cam in the comment section... 😒
Love the build clean and simple🥰
The last time I saw one this clean was in the parking lot of a Best Buy it was white lowered on some BBSs with a small chrome peashooter with a slant cut tip.
You know side note for those people that think the modern stance build is not innovative enough compared to the old days of totally riced, fully fabbed, sponsored show cars just throwing some wheels coilovers and a wrap on a stock car that probably still has the warranty is called "a build"... This is actually closer to the grassroots Spirit of low riding.
Friends and family taking the old family car putting nice wheels on it and dropping it as low as they could get it on a mechanical suspension for as cheap as they could.
Glad you’re back Ik the feeling of starting over done it plenty of times good luck on the build mate!!
I've noticed every time I've lowered a car, the front is always a couple inches taller than the back. It's pretty annoying and I've dealt with it with just about every car.
Opposite for mine lol
Even with air lift suspension?
You're doing something wrong then
Im on coils with a civic si fg4
find a kit for it, usually 1500 or 2500 maybe? just PnP and u can enjoy scratching ur lower body lol
bro wtf i thought u were a big youtuber nd i jus checked nd u only have 8k like what u deserve sm more
🔥🔥 son. Thanks for posting fam.
It looks so clean
Nice build! I’ve learned that coilovers will sag over a few days after installing.
Omfg I was looking for a video to see if preload changes height and I gave up last night and I randomly was watching this video and found my answer you guys are awesome🙌🏼love the car community
oh!! cool!! sports compact
最高に格好いいシビックになりましたね
Watched this video on a whim and holy crap your quality is insane. I'm about to start modding my 2000 Civic EX and this video got me readyyyyyyy asf for it lmao
This videos was tuff ash🔥🔥
Big love from Pakistan
This guy nice with a good heart and thinking about Neighbours
I'm 37 years old and just stanced my 2000 accord se after years lol. 15x8 jnc 003s
With godspeed coilovers. They look soo nice when they sit low.
Nice!
Did u just use coilovers or did u have camber kits and stuff
@@doublee4930 yes I had to fender roll and 5 degrees of camber because of the 0 offset. I didn't want to at the beginning but once your there might as well go for it.
@@cledesma135 fuck....I gotta find someone who can actually roll fenders never did it on a car before
Hearing Lupe Fiasco in the beginning of the video made me feel like it was Goanna be a good video 😊
Não falo e não entendo english!
Mais estes hondas são a perfeição dos carros
STANCE e o estilo do momento
Atualmente estou montando um Corsa b me inspirando na gringa por montar carros em casa
100% feito por mim
Parabéns pelo carro muito top
Força aí irmão, espero que tenhas conseguido rsrs
i’ve never seen any of your videos but this was definitely a banger
🙌🏻🙌🏻
wish i had a friend like this guy haha
Should have put that $ time and effort into the power plant . Now you have a half a low rider slammed JDM style bone . A Honda fit will drag you and your 18” rims . Thanks for posting
You "can" take out two of the three collars left on those front struts for another inch or so drop.
I can relate to this neighbor thing, I love to work late at night, I don't know why, I can't sleep without finishing what I started.
Are we going to get and update on this ride?!
Remember when you were at 1k subscribers now your at 23.8k good times brother, Love from Far north kaitaia New Zealand brother 🤝💯
Yessir! Thanks bro 🙌🏻
My Projekt Starts from now!
Projekt: *slamming my moms hybrid Prius in 12 minute...*
It went from a perfectly fine civic to a POS.
Good job
Big man 🙌🙌🙌 you earned a new subscroiyber, like you content really chill and nice, on the other hand i learn ✨the more we learn✨
Thank you bro 🙏🏻
Idk why UA-cam sent me here but I like it.
i just found your channel, subbed and notifications on! cant wait to see this channel grow! you’ll get there my man!
Wow, thanks man! 🤝
S.I.R front lip is the cleanest look for civics
I’m not really a Honda guy this bittttt clean
Still my favorite video!!! You need to do more like this!!!
This video taught me a lot yo thanks
bro gonnna hit a speedbump and he gonna ruin everything lol
I wish I could find an Ek coupe that clean 😢
Swap more wider lips or minus offset BBS RS and more camber in the rear that gonna be more badass bruh🔥
Nice video... Say hello from Indonesia 🤙🏻 keep Honda and Stance 🥂
Hello! Thank you 🙌🏻
Wow jim for the office changed alot lolzz
How to make daily driving more inconvenient..
I just saw your tik tok,i was looking at stance civics and saw this vid and was like hol up this car look familiar
Definitely coming back for more content keep up the good work bro 💯
Subscribed for the clean ek clip with Lupe.
you should've taken a photoshoot with only one side stanced lmao
This making me want to get back into the scene again 😂😂
I dont even think about the friends to help me do this i wish i had the money 😂 my hatchback would look so freaking good with an uograde 🚗
Get top hats to save the struts! Reset preload
$2k?! Sheeshhh I never bought anything brand new before 😅 I woulda FB Marketplaced everything for less then half that price lol
Stg
Never thought my dream car was going to be a civic, but here I am...
“Stance”=just slam it to the ground💀
I didn’t remember that good song, nice work 😎
What spring rate are those springs on the coilovers? I’m running 32k in the front and 40k in the rear with bc racing br series extreme low coilovers in my 2010 civic and it’s waaaayyyy too stiff. Any recommendations on spring rates?
Try some 16k - 14k
holy shit man 40k that’s pretty stiff 😂
There informing the Honda community to become even more unstoppable
Can’t believe this only took 12 mins
It took like 5+ hours lol he says that in the video
“Sorry 2k, my boy needs a car tomorrow.” 🤧🤧🤧 Jesus Christ the bromance tho
Whats the wheel specs and tire?
16x9 +0 195/40
What wheels are these???
My 2 Favorite versions of civic is the 6th gen with 5th gen tail lights and the EK Hatchback
Ur definition of low and mine are totally different 😂
bibleeee
Lol. Those entry level wheels are what I aspire to.
What's the name of them?
How to ruin your ride in a jiffy 👌🤣
I'm rebuilding my everything currently. I've had the same coilovers since before the rebuild. Accord 96
imagine ruining a stock civic
@ 8:50 shoutout to Zach Diamond bro that's the beat he used for "Wavy" and it's a fire ass song haha and the EK looks dumb clean!!!
🔥🔥
Great job fellas 🤟🏾
just subbed cant wait to see this channel in the future
Appreciate that!
you know you got real friends if they up with you fucking with a car till past midnight lol
real G
And that fender rolling tool I use it all the time on my circle track asphalt outlaw latemodel to roll the wheel openings on the thin aluminum pre colored sheets we get from roofing supply store that we bend cut bead roll and rivet but this roll tool is a game changer in the look to make my cut ots look more smooth I usually just cut sections and bend the tabs around to smooth the openi gs and round them until this the way I was doing it looked great everyone does it that way now they all use the tool for any oval track car body that is aluminum
you made a grocery getter look like someone stepped on a hot wheels car
I love people that put the specs in the description
🙌🏻💙
Just subscribed, very underrated channel man keep it up. 🤙🏽
Thanks bro, appreciate the comment 🤙🏻
@@AlexMelnik all love bro 🙏🏽
looks good, the rear is just a bit too much on a angle, get it in line with the front and that thing will look pretty clean