Ordered my SEIBON carbon fiber BM Hood Monday. I ordered some nice black cerakoted black hood button locks & the pins that go on the radiator support are burnt 6AL4V grd 5 titanium to match all the other titanium hardware throughout the entire build! Man if I were you I’d bullet proof your old engine & put it. That way you don’t have to keep messing around! I mean technically all you need is a sick set of rods, pistons & a solid crank hub & you can put down more power with no worries…💪🏻🏁
That sounds sick, you've definitely got a tasteful build going on over there! And yeah, it's tempting for sure. I may just have to do it after I swap in this engine, just need some time and $$$.
@@jake_spence Yeah I hear ya! This stuff is expensive, especially when you start building motors. Then again who knows, you could put this other engine in & get a lot of miles out of it! You never know? I hope you do though! Hope it stays together with no issues! Yeah so I’m gonna put my hood on when it comes & put in my phoenix plenum & ignition. Then I’ll take out this summer & hit some shows & hopefully race it a few times. Then over next winter I’m gonna order the trunk lid, put in the stage 3 pump & reflex controller. Like you said this is expensive…✌🏻😂
Great donor car Jake. The gearbox needs the common new gaskets and new solenoids and oil. Or the torque convertor has gone by these 19t's. Have a good one, Dutch regards Nico.
If it didn't have all of the mods, I wouldn't have paid what I did. But yeah, the 335i market is still strong where I live. You can fetch $8-10k for a decently clean early model 335i as long as it isn't 160k+ miles.
oh hell yeah some very good part in that car damn let me know when you selling parts and the giveaway damn!!!! there gose my pay check buying stuff out of bimmerstreet😂
The parts were what pushed me to buy it, because at least I knew I could recoup some of my money if things went south. And yeah, you should enter the giveaway... good luck!
Yes, that sounds like centre support is loose or your elastic coupler is broken. I had both and yours sounds more like coupler problem. Hope it will be that as it is a cheap fix.
At least i know I’m not the only one who goes through this after buying a cheap car. “Ahhh this might have been worse than I thought” has been said too many times.
Don't forget to enter the Doc Race intake manifold or $1,000 giveaway! 😉 bimmerstreet.com/pages/giveaway
Ordered my SEIBON carbon fiber BM Hood Monday. I ordered some nice black cerakoted black hood button locks & the pins that go on the radiator support are burnt 6AL4V grd 5 titanium to match all the other titanium hardware throughout the entire build! Man if I were you I’d bullet proof your old engine & put it. That way you don’t have to keep messing around! I mean technically all you need is a sick set of rods, pistons & a solid crank hub & you can put down more power with no worries…💪🏻🏁
That sounds sick, you've definitely got a tasteful build going on over there! And yeah, it's tempting for sure. I may just have to do it after I swap in this engine, just need some time and $$$.
@@jake_spence Yeah I hear ya! This stuff is expensive, especially when you start building motors. Then again who knows, you could put this other engine in & get a lot of miles out of it! You never know? I hope you do though! Hope it stays together with no issues! Yeah so I’m gonna put my hood on when it comes & put in my phoenix plenum & ignition. Then I’ll take out this summer & hit some shows & hopefully race it a few times. Then over next winter I’m gonna order the trunk lid, put in the stage 3 pump & reflex controller. Like you said this is expensive…✌🏻😂
Dude waiting to see if the car will turn over is so nerve racking man can't wait for next episode. The random memes are a beautiful touch
Always a joy when i see Jake posts a new vid! Keep em coming!! Love it!
Ya'll are seriously the best, thank you for watching and commenting!!
Awesome! So glad you got a donor and looking forward to more content!
Thanks man, me too! Took longer than I thought, but now that I've got it I'm ready to get going.
Im sure! I’m glad you found one that the body is still straight and not wrecked like a lot of ones I was seeing!
A new video on a friday, what a good way to start the weekend! keep up the good work Jake
Thank you bro! I've got the next video halfway filmed already, so we should have another upload again next week.
Stoked for this series!!! Can’t wait! Let’s goooo
Thank you man, I'm glad to see others are as hyped as I am lol
Nice to see you got not an engine, but a whole car. Can’t wait to see the 1 on the roads again.
Me too! Lots more I can do now. I'm excited to get the 135 back going again.
Damn, judging by the outside I was NOT expecting all the goodies under the hood haha. CHILLIN ON A DIRT ROAD
I think she's the definition of a sleeper 😂
glad to see you back in the grove!!
I'm doing what I can!
Great donor car Jake. The gearbox needs the common new gaskets and new solenoids and oil. Or the torque convertor has gone by these 19t's. Have a good one, Dutch regards Nico.
Thanks for the info! I am not too familiar with these auto trans, as I've never pushed the limits of one myself. Luckily I just need the engine.
Congrats! Looking forward to more content!
Thanks for watching the vids man 👍
Yess sir! You and me are on the same boat
Stock motor gang 💪
Thank you bro for all this content
i know us bmw guys love it 🙌🏽🙌🏽
Thank you Nando! I'm glad to see ya'll are as hyped up as I am lol
Dang $3500 for that condition, gives me hope about my 127k mile car in the same spec, but way better maintained. Nice purchase
If it didn't have all of the mods, I wouldn't have paid what I did. But yeah, the 335i market is still strong where I live. You can fetch $8-10k for a decently clean early model 335i as long as it isn't 160k+ miles.
Good thing you know a good Tire guy!!
No kidding! I just dropped off the wheels and tires for him so I can get 'er fixed.
That's hilarious. The one light every other BMW owner has on and doesn't really care about is the one light you have off now. LOL. TPMS! YAY!!
LOL, true! And probably the one that is the least scary 😂
oh hell yeah some very good part in that car damn let me know when you selling parts and the giveaway damn!!!! there gose my pay check buying stuff out of bimmerstreet😂
The parts were what pushed me to buy it, because at least I knew I could recoup some of my money if things went south. And yeah, you should enter the giveaway... good luck!
I just ordered a hoodie from Wilmington Delaware bro 😁
I see you 👀 you're gonna love it man, that's one of my favorite designs. Thanks for the support bro, and good luck!
@@jake_spence yay can’t wait to get it bro love hoodies
Bro please upload more! I love your videos. And last week I bought myself a 135i 🙂
Thanks! I just uploaded another one just now. And that's awesome! Welcome to the 135i club, I'm sure you're enjoying it.
Yes, that sounds like centre support is loose or your elastic coupler is broken. I had both and yours sounds more like coupler problem.
Hope it will be that as it is a cheap fix.
I just swapped a new tire on and it is way better, check out my latest video I just uploaded!
@@jake_spence Fantastic!
I will check it out now :)
Thanks!
Those lights definitely just needs brakes, speed sensor and a reset of maintenance light, at least it doesn’t have a check engine light. 🤞🏽😁
I dove into all of the lights today and figured some things out lol. It's all in my new video 😎
What’s it got for a tune
MHD, not sure exactly what tho lol
Alpina 335i?! what the hell I've never heard of that
This is a classic example of a fake badge offender, lol. Don't worry, it's not a real Alpina.
Hell ya big J! Looking forward to this
Me too! I just dropped the next video. Let me know what you think.
At least i know I’m not the only one who goes through this after buying a cheap car. “Ahhh this might have been worse than I thought” has been said too many times.
Haha, I didn't know what to expect after taking a gamble on it without seeing it... but I at least hope the motor is good 🤞
Word for word bar for bar
Would be super keen to see an LS swap E9X build - I don't think i've seen one done in-depth yet (or haven't been looking in the right places!)
That's what I was thinking! I haven't really seen one either, although I've found some good content after searching. Nothing like DIY videos tho.
Anxious for the content.
Me too lol
Share jakes videos jake cool guy..
Thank you man!
Gray seats 💨💨💨💨💨 busted out laughing 😂
For real tho, gray is cheeks lol
@@jake_spence cheeks..bruh 💀
PLEASE do the LS swap on it! I have an e90 I’ve been wanting to ls swap. It would be amazing to see how you do it!
That's the plan! I'm glad to hear some people are as excited about it as I am lol
@@jake_spence can’t wait!
Do you sell the 19t + intakes?
I'll be selling all of the bolt on parts except for the intercooler once I pull the engine.
@@jake_spence how much you want for they? and ship to norway :)
Very nice! Let get after that LS swap!! Haha
I can't wait to get started on it with ya!
I think you got a good deal overall. Whole car that drives for 3500$ is not bad
That's what I'm thinking too, as long as the engine is good I'll be happy!
Deer encounter at night on a frozen road while filming. Good looking out!
Always got my eyes peeled lol unfortunately it's common out here
Ik i live in Milwaukee so i feel your pain
I'm so ready for summer and warmer weather, but it looks like we're gonna get dumped on again lol
Alpine?
Fake badges, unfortunately
I believe I still have an Hvac fan that's used but still good. If you want it, message me.
I'm not sure if it's just the fan, or something more! But if you want to donate it, shoot me a DM on Instagram or email me. Thanks!
@@jake_spence message sent!
Lol. Don’t die in that busted car! Can’t wait to see more content.
I'll try not to! Although I just uploaded another video today beating on it lol
"lumberwagon" lol
I'm not sure what exactly a lumberwagon feels like, but if I had to guess, it feels like this E90 lol
Notifications activated
My guy 🤜🤛
Random fart noises will always get a thumbs up from me
I'm glad I'm not the only one who thinks it's funny lol
Sendddd it to the mooooon
That's the plan!
Loss me at LS swap; however, gotta create content.
Yessir! It'll just be one part of content, still will have plenty of natural BMW content as well.
CAP!!! That 135 never made 800 “wheel”...
Made 752whp on the dyno, and I turned it up higher on the street. Should've been near 800whp if not more.
Always a joy when i see Jake posts a new vid! Keep em coming!! Love it!
Ya'll are seriously the best, thank you for watching and commenting!!