Right on. I like hearing different ways to get this done. I did it my way because I had the xprog box already. Also I could not find any good procedures for doing this without high cost or begging a dealer for help. Thanks again for sharing.
Your hex editor is identical to what I used to produce(except in a paper printout) when debugging Assembler programs back in the 1980's. All of the double FF bits are high values. A "1C" is a packed positive number 1. If the C was replaced with a D, it would be a negative 1. The decimal number is unpacked it appears as an "F1".
Wow that was Kool to look at. I only wish I could send you a tac like the one you did and do it for me. Well many I can get someone at Ford to do it. Thanks for the knowledge.
Hey Carlos. I don’t know. I never thought about providing this as a service. If you think shipping both those consuls to me and back would be cheaper then a 50 dollar xprog box I would be willing to help you out.
@@josephhuwe9720 awesome I would really like to purchase new gauges don’t like the boring ones once I purchase I’ll be willing to pay shipping both ways and for your service
I have a 2007 ford STX. I took a lariat gague cluster out of another ford truck at a junkyard and when I put it in, my AC stopped blowing cold, I put my stock dash back in (which doesn't have a tach, thus reason why I got the lariat cluster) and AC started blowing cold again. Do I have to do what you did in this video to get it working? I seen you said there's multiple parts to the video? Please help🙏
Yea man our 07 up f150 are canbuss enabled meaning there are data wires running to the bcm and various components in the vehicle. My old lady had a malibu and I pulled the stock stereo out and drove to the store to get a part for the stereo and the entire dash was off and had no reading from the ac controls or anything so I assume that's your problem because my alarm on my 07 has been a pain to figure out and wire into the bcm the way I want to.
2 questions (I know this is 4 yrs old, but just for thought). Why did you change the line, save, transfer over, instead of just changing the same line on the new cluster? And 2nd question: why is a guy as smart as you driving an 05 model? (just kidding, I love my 05).
Hello sir i am trying to get the same thing on my 2004 ford f150 XL. If i buy the FX4 Cluster ship it to you, can you program it and have it ready and perfect so i can just plug it back in a be all set!? Ill pay for the whole process!
I put a FX4 cluster in my 2005 XLT. I have manual heater control. My AC stopped working. But when I put my original cluster back on it works fine. Is there a way to fix this.?? I don't like the oem boring cluster Also the low tire light is always on my truck did not have tire sensors
Yeah if you watch both part 1 and and part 2 of my videos and follow what i did it will correct all those issues. I had the same problem before I reprogrammed the new cluster. Also it will correctly display your trucks mileage after.
So if I have an xlt what all would I have to do to it? Considering I already have a tach. I'm able to buy an fx4 cluster right now but idk what all I need to do to get it working
If I were you and you wanted to make the change I would watch part 2 of this video. You don’t need to edit line AF0 but if you follow the rest of the steps I n part 2 you will get accurate mileage.
I don't really know. I have seen things on eBay. Someone says they can program it and you mail it to each other. I wanted to do it myself so I never looked to hard in to having a shop do it. I figured it would cost to much.
Could I create an eeprom programmer with an arduino, if so, how would I program the arduino? All the eeprom programmer videos I see use a lot more than just the 4 pins that are used in this video and I was wondering how I could get it to work. Would it be similar to how those programmers work?
Sorry about the late reply. I don’t check this often. The BDM connection supplies power and a 2 way data path to the microcontroller they use for the cluster. In my video I am simply doing a hex dump. If you have another means of performing this without the Xprog box, I say good work friend. I originally searched UA-cam myself for people using the BDM connector and found a guy who explained it’s use well, but he used a different device.
No I don’t. I just wanted a tachometer on my truck. I also like messing around with electronics. I posted what I did to save the days of work for someone else. I would have to figure out whatever you have to help you. Sorry friend.
@@josephhuwe9720 It's No problem... I wanted a swap but I figured You're from Oregon due to Location on the channel and I'm from Texas. Thanks for Responding, I need a reprogram as well from an XLT Cluster to a STX Really Appreciate it.
Hey Tommy, I’m sorry but I don’t offer this as a service. I simply wanted to share what I did in hopes it would help others who are trying to do the same thing.
I just did this 06 F150 XL plain jane cluster to an 08 FX4 cluster. Used ForSCAN and my AS Built data and it worked perfectly. It was easy.
Right on. I like hearing different ways to get this done. I did it my way because I had the xprog box already. Also I could not find any good procedures for doing this without high cost or begging a dealer for help. Thanks again for sharing.
@@josephhuwe9720 No trouble, be well.
Your hex editor is identical to what I used to produce(except in a paper printout) when debugging Assembler programs back in the 1980's. All of the double FF bits are high values. A "1C" is a packed positive number 1. If the C was replaced with a D, it would be a negative 1. The decimal number is unpacked it appears as an "F1".
Wow that was Kool to look at. I only wish I could send you a tac like the one you did and do it for me. Well many I can get someone at Ford to do it. Thanks for the knowledge.
Have have a gauge without a tac but if I use a bass model cluster with a tac will I have to program it if both trucks are a xl
How much would you charge me to take the data from old cluster to a Lariat one that I got
Nice job 👌 buddy
Thanks
I want to do this to my truck but I hate electronics with a passion. Using them that is. So could I just have the dealer fix it if I have any issues?
do you have a diagram of the xprog connections, very fast camera movement and couldn't see them
I will put something together for you when I get home from work.
How much would you charge to programed and ready to go on a 05 f150
Hey Carlos. I don’t know. I never thought about providing this as a service. If you think shipping both those consuls to me and back would be cheaper then a 50 dollar xprog box I would be willing to help you out.
@@josephhuwe9720 awesome I would really like to purchase new gauges don’t like the boring ones once I purchase I’ll be willing to pay shipping both ways and for your service
@@josephhuwe9720
tiradocarlos13 @gmail.com
I have a 2007 ford STX. I took a lariat gague cluster out of another ford truck at a junkyard and when I put it in, my AC stopped blowing cold, I put my stock dash back in (which doesn't have a tach, thus reason why I got the lariat cluster) and AC started blowing cold again. Do I have to do what you did in this video to get it working? I seen you said there's multiple parts to the video? Please help🙏
Yea man our 07 up f150 are canbuss enabled meaning there are data wires running to the bcm and various components in the vehicle. My old lady had a malibu and I pulled the stock stereo out and drove to the store to get a part for the stereo and the entire dash was off and had no reading from the ac controls or anything so I assume that's your problem because my alarm on my 07 has been a pain to figure out and wire into the bcm the way I want to.
2 questions (I know this is 4 yrs old, but just for thought). Why did you change the line, save, transfer over, instead of just changing the same line on the new cluster? And 2nd question: why is a guy as smart as you driving an 05 model? (just kidding, I love my 05).
Hello sir i am trying to get the same thing on my 2004 ford f150 XL. If i buy the FX4 Cluster ship it to you, can you program it and have it ready and perfect so i can just plug it back in a be all set!? Ill pay for the whole process!
I put a FX4 cluster in my 2005 XLT. I have manual heater control. My AC stopped working. But when I put my original cluster back on it works fine. Is there a way to fix this.?? I don't like the oem boring cluster
Also the low tire light is always on my truck did not have tire sensors
Yeah if you watch both part 1 and and part 2 of my videos and follow what i did it will correct all those issues. I had the same problem before I reprogrammed the new cluster. Also it will correctly display your trucks mileage after.
So if I have an xlt what all would I have to do to it? Considering I already have a tach. I'm able to buy an fx4 cluster right now but idk what all I need to do to get it working
If I were you and you wanted to make the change I would watch part 2 of this video. You don’t need to edit line AF0 but if you follow the rest of the steps I n part 2 you will get accurate mileage.
so I have a xlt too, have a lariat cluster, where can I get this type of work done on the odometer.
I don't really know. I have seen things on eBay. Someone says they can program it and you mail it to each other. I wanted to do it myself so I never looked to hard in to having a shop do it. I figured it would cost to much.
Could I create an eeprom programmer with an arduino, if so, how would I program the arduino? All the eeprom programmer videos I see use a lot more than just the 4 pins that are used in this video and I was wondering how I could get it to work. Would it be similar to how those programmers work?
Sorry about the late reply. I don’t check this often. The BDM connection supplies power and a 2 way data path to the microcontroller they use for the cluster. In my video I am simply doing a hex dump. If you have another means of performing this without the Xprog box, I say good work friend. I originally searched UA-cam myself for people using the BDM connector and found a guy who explained it’s use well, but he used a different device.
I did the swap on my 07 xlt but my ac wouldn’t work any ideas anyone had this problem
Use forscan with liscense
Where did you get the chip to reprogram?
I am reprogramming the built in chip on the cluster.
@@josephhuwe9720 The XProg chip to reprogram, I have a different cluster and need it reprogrammed that's why. Do You have a Business?
No I don’t. I just wanted a tachometer on my truck. I also like messing around with electronics. I posted what I did to save the days of work for someone else. I would have to figure out whatever you have to help you. Sorry friend.
@@josephhuwe9720 It's No problem... I wanted a swap but I figured You're from Oregon due to Location on the channel and I'm from Texas. Thanks for Responding, I need a reprogram as well from an XLT Cluster to a STX Really Appreciate it.
@@josephhuwe9720 this be the device?www.amazon.com/dp/B088WY4GJ5/ref=cm_sw_r_cp_apa_i_e2UxFbF4FC9D9
What would you charge to do mine. It's a 05 Ford f150
Hey Tommy, I’m sorry but I don’t offer this as a service. I simply wanted to share what I did in hopes it would help others who are trying to do the same thing.
How much you charge me to do one for me