Відео

i just did this job on my 2020 gmc terrain, only issue i had was GM put red loctite on those caliper bracket bolts ..what a PITA it was getting those bolts out, especially the two on the bottom..other then that, everything went pretty smooth..i'm about to do the front brakes in the next week or so..great video,lots of good info here..TY

Is that a harbor freight router speed control being used on the cutoff saw? How well does it perform?

Good day, I own the P2 also. I think if you were to try it in cooler weather you would see a bigger difference. If you opened the hood on a cool morning and there was a draw, I think it would be much more visable.

You’re not done. Dumb maybe. You didn’t line up the clutch with the ramp shoes so it will not work properly and be noisy and your new clutch will be destroyed in a couple rides assuming it will even take off and not burn the belt off. 😂

You should never ever ever ever walk a belt on to anything. Use the tensioner’s. That’s what they’re there for

You accurately described everything as it should be done

Oh no🤦‍♀️ not two of you 😂

Has anyone tried just …. pulling the cover off / removing a spacer / putting it back on ?

What would make these wobble. I’m sure I did something wrong.

Good video, but just for reference the little piece that goes into the slot in the shaft is the “key”, not the keyway. The keyway is the slot it fits into.

Great job brother! Thanks much!! PS, I have the same 3/8 rigid and magnetic base light!!

What's the purpose of tacks with tig if you end up mig over..?? Never seen that before, thought its just funny the way that was performed..😂 Nice work, i like your stand designed..

Hello sir thanks for posting this informative video which I happen to be having the same problem 😂 I’m testing the plug where you used the light but with a test light instead but not getting no power, I checked fuses and all is good. But since you mentioned it only takes very little amps is that why maybe my test light doesn’t pick up anything?

This has been an ongoing project whereas every year I’ll do some upgrades to it before sending it off to the campground for the season. During the winter months it’ll get stored away in the shed. Then just before camp opens I’ll bring it to the Barn for some more upgrades. So stay tuned as each new season I’ll be releasing new videos. Thanks for watching and be safe everyone!

GREASE goes in where the angle is !! In that little ball

It’s against the law to plow across the street

How is the Chinese clutch holding up?

Good job. Same mi on 2016. 20k. Rotors. Pads

thank you for the review, it's pleasure you like our product

Buffalove!!

Thank you very much

Good stuff! I've wanted it for a long time! When is there a sale?

I watched your video today and immediately ordered this device for myself

Do you think it would be possible to gain access from underneath?

Only thing I wouldn’t do is spray brake cleaner to clean rim at end. I rattle can sprayed my transit rims and think if you spray wit( brake clean, they would be a goner.

You made that look a lot faster and easier than it is. Well done thanks for the video.

Excellent work. Im having the same issue right now. Two rusted broken off bolts on drivers side. Looking for a mechanic that can do the job done besides from taking to the dealer which can cost a lot of money.

Did you have to drop the hitch?

Where is the fuel filter on a Yamaha motor and a golf cart? 😢

Great video! Hey what kind of torque wrench do you use? I need to get me one.

Someone thought it would be a good idea to park the plow truck facing away from the road! First rule for snow removal is, keep your footing clear!

And the link for your scan tool is nonexistent.

Do you plug the scan tool into anything? Is it remote? Not a lot of time spend on the scan tool.

That's a great, thorough job! And thanks for showing part numbers. Can't believe that wear with less than 20K!

Tks. for the video, Adding the string was a life saver.

Want to "see" a low current draw? Latch the control side of a relay. Only about 100mA to do that. That relay will glow like a red cherry 😉 Blind spot monitors draw low current and glow like crazy when causing a key off draw. Clusters glow nice on the GM's that have draw issues too. If a fuse is glowing that means it's about to blow 😊

Same process for a g2?

Ohm's Law works with Volts, Amps and Ohms so 12.6V divided by 300 Ohms calculates to 0.042 Amps or 42 milliamps not 0.042 milliamps as you wrote on your whiteboard.

Hammer down!

I wish it would snow like that in Michigan

Used your method. 2k miles and so far so good. I check it with inspection mirror once in a while just to make my OCD happy. Thank you.

Meguta

How's this backup camera holding up after a couple years?

is the flange itself that you used a 2.5 or a 2.0 inch? I doing the same thing you did and from what I can tell in the info of the pipe you listed is the flange is 2 inch not 2.5. Is that accurate?

Would a track skid steer with quick attach snow blower been a good choice?

Yinz need a Lucknow three point snow blower, love my 7 ft, added hydro to the turn and tip end. Here in butler pa have not used it in a few years. When you need it you need it. Tosses the snow 50 ft +

430Nm tighten 1HZ Harmonic Balancer bolt, will this same instructions work for that?

How did you get the aerial shots? Pretty cool

What about mail box

Would like to point out your old one is a Straight grindr and the 2 new ones are 90° grinders. 90° grinders have an extra gear box to change direction wich will create more sound. It's still a great test but not 100% fair