Відео

@@ianb7818 it’s a Remington 700 SPS Tactical 16” with a Bergara HMR stock.

@@senorboardhead that would be awesome, but I like how you can keep a tube fed topped off after taking even a shot or two :D

@@markz.5891 thanks for the compliment and subscribing! So the A2 stock it comes with is longer internally than a mill spec buffer that takes a six position stock. The A2 stock comes with a rifle length buffer, which is longer than your standard H2 or H3 and other variations of six position stock buffers. I’ve thought about getting a heavier rifle length buffer to slow the rate of fire down some and keep the gun cleaner suppressed, but haven’t done it yet. If you’re just buying the complete upper and building your own lower receiver or sourcing one, I’m sure you could go with a six position stock and mill spec H1, H2, H3, buffer as needed.

@@Leman.Russ.6thLegion you’ll have to buy the SilencerCo 3-Lug Mount that’s not included. (It comes with a 5/8x24 direct thread mount for 300 blackout.)

@@ADAMKRO definitely go with the OSS/HUXWRX out of these suppressors for this gun. Even though they’re quieter, I wound up breaking the pdw guide rod in the gun from too much pressure from the baffle suppressors. It’s a special guide rod compared to the normal one that’s in a PTR91 and costs 130 bucks if I remember right. I’ve got the Vox S on an Adams Arms P2 12.5” 308 AR10 and a Micro 30 on a PTR 32P sbr and another Micro 30 on a PSA Dissipator in short configuration with a 5.56 endcap now.

@@hans-gunterlatz5836 thanks 🦾😂

With +4 followers and +1 basepads, I swear I missed 22 out of 30 times lol

@@OsamaBinSmokinTV loved it so much that I bought two and just got the 6” rod kit for this video! Already had the 8” and 10” rods, but wanted shorter still for movement :D

@@warrenog499 good to know. Flat points and hollow points definitely have their problems getting up some guns feed ramps and/or chambering.

@ never had issue it ballistic too or hp this stuff super disappointing especially for the price

@@Mr.GunLifeJohnny Occam makes a part called a Rear Sight Tower or RST, that has a pic rail on it. A shop used a press to take my original “gas block” off and put this one on.

@@pilotincommand85 I appreciate your knowledge! Didn’t know it was a problem to do that considering it can be done with a bolt gun. With so many others in my collection, this won’t see much more use. I really kind of regret buying it now that I just bought a new vehicle.

@@chadmccormick1412 I bought a second Mask for a custom 10/22 I recently put together and we both made a great choice! I have a total of 10 Dead Air cans now. 2 Nomad Ls, 2 Nomads, 3 Wolverines, a Wolfman and 2 Masks. Any issues they had are old news and have been remedied. They have excellent customer service and I like being part of the Asylum for news and swag.

@@RangeToyz that makes me feel so much better! This will be my first DA can, but probably not the last one! I have a Rugged Obsidian 45 and love it!! Love your content brother! I will let you know when I get the Mask and shoot it.

@@honkhonk1555 WBP makes quality firearms and that’s a big decision. I would also like the 5.56 version someday just to complete a collection. Maybe make a pros/cons list of what’s most important for you now and perhaps you could get the other in time. Let me know your thoughts. Here are some of mine. 5.56 ammo is more available right now. It’s less recoil and lighter weight to carry more. 7.62 has more energy in this barrel length and the magazines are cheaper and easier to find compared to 5.56 AK mags. You can get 7.62 drums as well. You can also use subsonic ammo like Detroit Ammo 220 grain, Brown Bear 196 grain (if you can find it) and Hornady 255 grain, but it’s expensive.

@@Scythe_Voltage I tried three different magazines, Bakelite, Romanian with US follower, and Croatian bolt hold open, and the bullets didn’t make it in the chamber. My receiver has been shortened and rebuilt with a different trunnion from damage, so the failure to feeds might be from that. I wish I had a new/original Micro Draco to see if this MFX ammo feeds properly with it.

If it’s for a Micro Draco, only use a baffle suppressor like the Wolverine with subsonic ammo because you can’t get an adjustable gas block for it and KNS can’t make an adjustable piston that short that would work. AK’s are already over gassed, and adding a Wolverine with any supersonic ammo forces the bolt back extra hard and will cause damage to a Micro Draco. Stock or no stock, the bolt slams back into the trunnion. I believe you could get either gas adjustment system for the bigger Draco pistol and of course all 16” barrel guns. An adjustable piston is easy to install yourself, but it gets the receiver filthy quick. There’s a few different companies making adjustable gas blocks, but they require a press to switch them and some research. (I had M13 Industries put a DAG13 in my Mini Jack sbr). You’ll have to adjust the gas between subs and supers for either gas solving system. Flow through or Ultra low back pressure suppressors like HUXWRX or maybe SilencerCo Velos can be used without a gas adjustment system and the gun will stay much cleaner, but subsonic rounds are loud af compared to a baffle suppressor. Really, for the cost of everything, I kind of wish I didn’t buy it now, but it’s a good learning experience to share with everyone. I have a newer video with it using a binary trigger even. ua-cam.com/video/lQlJwwOAVGw/v-deo.htmlsi=4wbUtFa0rU3OadWL Supersonic rounds unsuppressed, subsonic rounds suppressed.

@@RangeToyz dang it, thanks so much for the info and your time. I was gonna order a binary trigger so if I “full auto” fire would that damage anything? I ordered the micro Draco, costume pistol grip, costume rail, costume foregrip, 75 round drum mag, flashlight laser combo, and 1000 rounds of “brass ammo” i don’t know much about it but the guy at the gun store hooked me up, I was gonna order the suppressor and binary trigger today but my debit card has a 2k spending limit. But is full auto with no suppressor gonna damage anything? I want this gun to last for the rest of my life so any info helps thanks so much

@ so I’ve got a different rear trunnion for that triangle stock that they had to switch out to. The normal trunnion that comes with a Micro Draco has a bar across the bottom of it that doesn’t let the Franklin Armory trigger sit flat, so it has to be removed and I don’t know if that effects the strength of the back of the receiver. People have done it though, and it’s worth looking at it. I’m not sure how Fostech designs their binary triggers and if they would be different. I edited in the link to my Micro Draco video on the last comment if you didn’t see it already ;)

@@Keep_It_Loaded it’s awesome, but can’t do buckshot or birdshot 🥲

@@Sofarguns407 you’re right, it’s the best subsonic 7.62 x 39 and used to be a lot cheaper and available before demand and sanctions. Detroit Ammo has some 220 grain subsonic and Hornady has some new ones, but they are pretty expensive.

@@X.davidWilliams it’s a good search to find the gun and the parts needed to make a short barrel shotgun. That’s the toughest part. The ATF EForm 1 is easy and required NFA engraving can be had in practically every city. I like them looking good, so I don’t engrave them myself.

@RangeToyz - Huzzah,, and thank you, thank you.

@@deroncarl867 no threads for choke tubes so I guess I would depend on the shot size you use, velocity and distance from your target because of the spread pattern. Nothing too far away, but up to 35 yards or so perhaps

@@AgoristAlex agreed 💯 Great looking front end and it stays cleaner without a suppressor. I wound up getting three. Turned this one into a short barrel rifle and the other two into AOW’s.

@ was lookin for roller lock I can ride with. I think this fits all criteria’s

@@williamboggs1682 I’ve been busy with work and my girlfriend. Just bought a new truck, so I shouldn’t buy any guns until my five year loan is paid off 😢 Stoked though, because I needed it. I’m going try and put together a quick video this weekend with some new 7.62x39 ammo that’s on the market. Appreciate you looking out for me.

@@williamboggs1682 I’m surprised the last two shorts, Do You Concealed Carry? and Go Get Yourself a Shotgun! didn’t get into the main algorithm feed for a second.

@@michaelfelderman915 I’ll wait till a reputable manufacturer like Optics Planet has them for sale after they’ve cleared the legal hurdles and they actually have three positions so I can still take single shots. I prefer a traditional MP5 trigger housing on a MP5 as well.

@@JohnC-o8l in full 12 inch configuration, it really takes the initial blast away, but you still hear the supersonic crack. It’s interesting with buckshot because of all the pellets and if you’re using a pump gun like this, then the sound doesn’t start till it’s a good ways away from you at the end of the silencer. Slugs suppress a little bit better because they feel the bore and the baffles are more efficient like that. It’s been a while since I’ve shot both so I’ll try to get out in the next couple days and get some fresh thoughts for you. Check out some of my other shorts and longer videos in my shotgun playlist as well.

@@nickm8651 so far, so good, and nothing loosing up. Blue loctite on the factory bolts as I remember.

@RangeToyz the combo is $394.95. Seems to be a good deal.

@ good price, but you might still check Simmons Sporting Goods for the red dot and do the email for best price and compare it with shipping the mount from HK Parts.

@@nickm8651 good price, but you might still check Simmons Sporting Goods for the red dot and do the email for best price and compare it with shipping the mount from HK Parts.

@@jasonschmidt157 it’s awesome, just a little slow in binary mode. The factory trigger spring hits the primers harder too.

@@kelvinmagoon lol I sold mine when I got a Stoeger Condor Outback and love it for the size and wood furniture. I’ll check out your Citori :)

@@chadw.6049 Omega used to make this specific 9mm drum sight on their MP5 builds, but I haven’t found them anywhere for sale. You can get 7.62 versions with the V notch, but the other circles around the drum are smaller for that caliber and distances. I really only use the V notch and put a few of the 7.62 versions on a couple MP5 22LR guns without red dots and they work good. You can find used 7.62 versions for cheap too.

@@killzxo21 I made this short barrel myself originally by tapping and drilling two holes for a Stormwerkz hinge and Ace stock. It was the easiest way for me to do it with the flat rear trunnion. I really only shot it after I made it into a short barrel rifle and using this suppressor with less than 200 rounds of supersonic and subsonic ammo combined, started tearing the rivets in the trunnion from too much back pressure and bent the back of the receiver outward on both sides. I sent it to a shop and they cut off the back of the receiver and said this was the only stock they could use. They welded closed the original holes and drilled new ones for the new trunnion and refinished the entire receiver as well as adding the gas block with built-in pic rail. I’ve got another video explaining it with pictures ua-cam.com/video/aGTZNJePb5g/v-deo.htmlsi=uw-I8MK7KxKZco04

@@RangeToyz I see…. Ok I’ll look into your linked video to learn more! Thank you brotha!

@@12oz_Coronas this stock and railed gas block were both installed by a custom AK shop. Almost a grand. I drilled and tapped the screw holes myself for the original Stormwerkz hinge and Ace stock I had on here before the back pressure from the silencer destroyed the receiver from less than 200 rounds of subs and supers. I have another video showing that on why to use only subsonic rounds shooting suppressed.

@@Evanmuller-n5z I think it breaks up the gun for sort of a camouflage effect. You could see it in my environment on my longer video. I definitely thought it was ugly when I bought it, but it’s grown on me overtime. I personally would like it all OD green and nothing else, but everyone has their own tastes. There are some cool DIY spray paint camo kits you can get with stencils even.

@@kristianmoore7099 I’ll see if I can find some locally. Right now I’m really not budgeting for guns or ammo because I got a new vehicle. I saw the price and hopefully it will come down a few years after the election. If I make a video, I’ll definitely title it with that ammo and I appreciate you looking me up.

@@kristianmoore7099 I thought about it and just ordered two boxes. I have a Garmin chronograph now too, so hopefully I’ll have a video for you in about three weeks :)

@@nothankyou7382 thank you! A good friend gave this magazine to me probably a decade ago. He thought it would be perfect for this Micro Draco because of how you rock it in and he was having problems locking it into his full size AK because it would hit the front grip. I think it’s custom made from two magazines. I’m not sure where you could find one, but keep searching on forums and auctions.

@@eze8024 it’s just the camera angle :) It lines up really nice.

@RangeToyz cool. I'm thinking about buying an hkparts rmr mount and possibly holosun 👍

@ great choices! I like the auto brightness and clear, non-obstructed view of the Shield sight, but now I think I like the Holosun more because you can turn it on and off manually. If I lose the cover of the Shield sight I’m SOL

@@SawNaingOo-vx4lc could you clarify your question?