Відео

Wy do you think that the internal thermometer is more accurate than the Go20?

The GO20 needs 13.5 v at 6 amp. What is the output of the RIVER 2 pro in terms of voltage?

I dont know why, but when I plug the fridge on my 2400w Ecoflow it says I can only get to 24hrs of power. How does yours gets up to 3 days running ?

I like that set up😊

Took it out on day 2

Man, nice I had to go out to the garage and look at my 2022 Sportsman 450 ESP no openings on mine they must have addressed the problem !

Man, nice but I live in Arizona, no mud here it's desert all sand and rock's !

I love the blue and black paint scheme

Just had to come back and say this machine is so unbelievably clean!!!

Yes, they are excellent detailed presenters - ones which I follow, but I did enjoy your real-life tests =;^)

Why does polaris make a quad that you have to re-engineer ?

I just picked my Model Y up today. Was thinking about getting another cover, but that truck you showed at the end is great! Thank you!

I am so tempted to purchase a 450/570 Polaris because I can get one for much less than a Yamaha product, but I'm not sure I have enough time to correct all the mistakes Polaris makes on these machines. Not sure why Polaris exhausts the 570 different than the 450 HO's, either...seems odd. Certainly does look like you've ingested debris from the actual intake, but I wonder if you need to reseal the inner clutch cover with RTV like some other guys have mentioned doing on the Polaris forums.. Beautiful looking machine, though!

I love how Polaris guys hate on Yamaha’s flip-a-lever diff lock and Yamaha guys hate on Polaris’s AWD. Seems like they both have their pros/cons.

Portuguese - Obrigado pelo seu vídeo, eu comprei a ECOFLOW RIVER 2 PRO aqui em Minas Gerais Brasil e precisava saber exatamente a autonomia para geladeiras. Seu vídeo foi muito bom e esclarecedor! Muito obrigado.

Appreciate the video. I’m cleaning one up for a family member as it is in an estate due the death of the owner. This will help me to get under the seat and clean as the unit is going to have to be sold in an estate sale.

Ok. Finally a really beneficial video today : ). I still would probably prefer a version of the roll-up design. The cover just lays on side rails. it is not secured with snaps or anything. So it makes noise when I happen to hit a bump in the road or drive through rough roads. I would be careful placing items on top of it because it is very high and there is very little to keep those items from rolling forward. They would also obstruct your view

I like the R2P power, but love the dimensions and weight of the Bluetti;

I don't see how the unit ran that long. Even Iceco claims 995 watts for 24 hours. My EB3A only runs my Iceco 55 for roughly 6 hours. Works out to 995w÷24h=42 watts (rounded). 268w÷42w=6 hours rounded. I need to call Iceco and ask why yours get 14 hours.

I have an EB3A also. I have a brand X 120watt suitcase solar panel. I found out that the angle of the panel makes a huge difference in relationship to the sunlight.

I have the exact model i got it into some mud for some hours and it got so stuck, after that it doesnt have enough strength to move the tires. I agree with the problems and i had the 2020 eps version stock and it was the best i had it was stronger and was way better than this one. So regret getting this one.

Hahaha it's the simple things in life that lead to happiness :)

Sie mussen den ac anmachen sonst ladet die solarpanel nicht

What is the output (w) that the fridge pulls from the eco flow when the compressor is engaged?

Great review. I just purchased the Cruiser Pro and waiting for it to arrive. I appreciate your analysis on this bike. It is my first Ebike and i am in my 60's. Thank you for your opinion and going over the options.

I’m thinking an ecoflow 1300 would work great for that Iceco! Thanks for the vid 😊

That's so awesome !!!! I also see you have a winch !! Please share links 🙏 I'm new to Polaris, new 24 sportsman 570 on last Friday I need these both please help 🙏 thanks for sharing ,great video

Thermometer may be off

I have a dometic cooler

Bought a 23 the seat release is gone only brite force to lift ..stupid engineering. Also rear box is gone only a floppy compartment accessible only when seat is out of the way .another genius idea

I don’t need it with the tinted rear windows. Just gets in the way. I never use it. I took it out day one as he said. Other vehicles I’ve had like a Ford Explorer. Never used it.

Another way to fix this issue is to take the bottom hose clamp off and then spin the belt box breather tube 180 degrees and tuck it right up besides the frame and plastics so it will sit on outside of frame and inside of plastics away from mud and debris.

Thank you, this helped me with this a lot because my keys fell on The motor and i didn't know how to remove the seat

Wow, was that totality? What state are you in? Cool video.

Super clean bike man!! 🔥🔥🔥

Wow! Thanks for this video man! How are the handguards holding up so far? I’m really thinking about getting some tomorrow now that I watched your video, but was wondering how’s the wear & tear with them?

uncontroversial opinion, but i like it

I have the same setup, except I went with a refurbished version of the Ecoflow River 2 Pro, I've run a few tests, don't feel the need to make a separate video, but for those who stumble across this video like I did before I bought the setup, might be a few more helpful data points. I have run (2) tests as a bit of a control before I run anymore. Both tests aren't true real world scenarios, but I just wanted to establish a baseline. Both tests were run in a room that I have the thermostat set to 25 C / 77 F, although averaged out to about 22.5 C / 72.5 F over the course of both of these tests, tracked through a Mysa thermostat. I did not open the lid on the iceco at all for either of the tests, and the fridge was completely empty, I know that having contents would have kept the cooler going a little longer, but like I mentioned I am just baselining. I used a WiFi thermometer in the cooler so I could track the temp throughout the 3 days, the high and low spikes cycled on 10 minute intervals consistently throughout the 3 days (compressor kicking in and then going off). Test 1: Fridge starting temp was 15 C / 59 F, and I had set both compartments to 0 C / 32 F, no cover on the cooler. The cooler lasted 3 days (72 hours) and I shut it down with 5% left on the generator. The average temperature over the 3 days was 1.6 C / 34.88 F, the low was 1 C / 33.8 F, and high was 2.3 C / 36.14 F. Test 2: Fridge starting temp was 6 C / 42.8 F, and had set both compartments to 0 C / 32 F, this time I used the cover that I got with the cooler. Cooler also lasted 3 days (72 hours) and I shut it down with 10% left on the generator. So it didn't seem like the cover helped with keeping the cooler going much longer, although interesting enough the average temperature over the 3 days was 1.3 C / 34.34 F, where the low was 0.6 C / 33.08 F and high was 2.1 C / 35.78 F.

Thanks for your video. It was a good advice how to use. Still I don´t agree with you, a "roll up" is far better, but your use-advices was helpful. Thanks again

I also have a “real world” test of the IceCo GO20 powered by an EcoFlow River Pro 2 at this link: ua-cam.com/video/otStOZfAjak/v-deo.htmlsi=ol_qmipAnO2ekDn_

I appreciate your tests

Nice video. So many folks just getting into lithium, solar, etc.... have exactly this question. Very helpful!

You actually loosen the t20, manually tilt the headlamp to where you want it, then snug it back down, atleast on my 24. Found out the hard way as mine wouldn't adjust enough down by loosening it like in this video and the bolt came loose and fell out on the trails

Great review, I like these tests, thanks

Awesome！Thanks for your introducing. Setpower fridge freezer are kind of like ours. Antuncle made in China. We are the wholesaler having over15 years experience in this industry. Our R&D Team is from Dometic. If someone is interested in it, feel free to contact me. For business. Cheaper but better.

Does this come standard with the vehicle?

Thanks so much for this test! So helpful!!!

Do you know if you need to connect it to a phone for the iceco to work? Or can it run on its own? Thanks for all your information with the videos!

If you get into a collision, anything you put on top of that shelf is getting launched into the front cabin. Keep it below.

i have to route my belt case exhaust as well but the intake hadn't occurred to me. nice to know where to have a look and see if its open and in somewhat of a silly spot on the '23