Відео

Thanks for attempting and sharing this.

Told Ya....ehh.....Sounds great

Audiphile here. Indeed, it's really hard to discern, but listening on AirPods Pro to me the FR10's output sounds clearer. Also, as you said, the FR10 has a slightly hotter signal, no doubt, which contributes to a more pleasing sound to the ears I would think.

Good way to test sound for gigs.... Getting them to sound exactly the same though idk . Usually id say the XLR is best because it can send the info better, quicker, to the FOH . I don't hear a difference here. Try it at a larger venue. There may or may not be a latency with pod go without XLR. I bet the XLR is great on the fender being a newer unit

I hear no difference

Indiscernible in my humble opinion.

The tonex one with all of my pedals into a fender FR-12. It’s the best digital sound I’ve had so far. Next is to get another FR-12 for a stereo setup lol.

Get yourself the UAD Dream pedal and the Fender Tone Master FR10 and you’ll have the best sounding Deluxe Reverb around and it will weigh less than 5kgs!

Thanks! I tried the settings in my POD GO! It rocks on my LP but kinda sounds brittle in my Strat!

in other vids I have picked up the Info that the first series of these had a hiss issue. I think it should be fixed in the more recent ones and I believe also that Fender offers a bugfix for the hiss for the older series which can be done at the dealerships. I'm telling this from my memory so details might be wrong but I think it may be worth looking up online info on that. I have the same spkr coming. Will let you know if there is a hiss issue. But it will take some more days. The dealerships are having a bit of a lead time at the moment on these Fender FRs.

Wow... it sounds amazing..

Hello , Can I get your patches? If possible

When I was considering a Fender FR I read a lot about the hiss issue. My understanding was it was an issue with the initial release & was supposedly fixed on subsequent runs. I also read of folks that got them that hissed, exchanged them for another & got one that didn't hiss. I got mine & it's dead silent with the pod go. Maybe you should try an exchange? I think you're spot on about the onboard tone controls. I can dial in the room easily on a gig. Hope it does the job for you.

That EQ cut did make the difference....much less shrill ....that 10 in the fender sounds bigger than I expected. Nice 👍🏻 job

Thanks Josh-sounds good brother.

I've found that tweeking my patch's through my FR12 with cut around 11oclock makes them sound better..

My FR12 doesn't hiss

Sounds great....try setting cut around 11oclock..that sounds good to me on my fr12

I literally just bought one of these to use with my Headrush. I’m going to use it just like you. One output to front of house and one to this speaker for me. If they ever make a tweed version, I’ll be all over it!

Thanks Josh!!!

I have one on my pedalboard and love it. A lot of people are using two which will make even more sense when IK comes out with the new update this month. It did take me some time to find amp captures that worked for me and those were NOT the factory presets. But there are a lot of great captures to be had out there. I am using two Tone Junkie captures. A 68 Fender Twin Reverb and a 66 Vox. I am using it in the loop of my HX Stomp.

Glad you got to try one out dude.... I will say I was impressed by what it had to offer out of the box.....but diving into some settings first then getting exactly what you want on it from the app...it becomes pretty incredible 💯

I put my Tonex pedal in FX loop of my Podgo, turn off Amp/cab and use Podgo as stomp only. Not sure if all my settings are correct but seems to work well. Could you do a video on that experiment?

I run the eq on my fr12 flat except the cut which I run at around 11oclock. Volume about halfway up....sounds huge with any modeller to me

I think the boss ir-2 and that pedal board sounded much better. Not even close but I’m not in the same room to hear them.

I’ve found the pedal very good as well. The “feel” is def better IMO albeit I’m getting better tones with the Stomp-but I’m still learning the Tonex One. The noise gate is OK.

Snapshots suck a**. And my POD Go is stuck in "Snapshot mode". And I can't get out of it, because I don't know how I got into it.

I just wish there was a pedal where the reviewer said: this multi effects was perfect. I did not have to change anything!

grazie my friend

Do you notice any loss of volume in the FR 10 when you go direct to the house or PA and need to adjust because it’s droppped down?

One downside I can see is price. You’re paying a premium for a modeling unit and a second premium for some sort of FRFR cab/amp. With something like a Quilter pedal which is also an amp you can just plug it into an old school guitar cab, and it has an XLR out. Not quite as versatile though on the multiple sounds front.

Try the boss ir200 LOL keep after that tone have fun

sounds good and I could easily make that work - if it sounds good, it is good...

Please try the ToneX as your digital amp. The Tonex One does the trick. Just use the best rated model availablenof the amp you like (Deluxe Reverb I guess?). I tried MANY digital amps and ToneX is by far the most reals sounding AND it has so many extras (comp, rvb, switch/boost whatever, …)

You lost me when you said Tonemaster, They sound like the cliché, with one or two blankets have been covering the whole amp. Tubes for me.

I'm anxious to hear your thoughts after you gig with it. I use the FR12 & pod go & I'm pretty happy with it.

Sounds great. I have the fr12 with the IR-200. What amp on the IR2 are you using? There's loads of switching variety on there too. Check out the cab and amp options. The FR10 will sound great with the HX STOMP XL. I used a Hot Rod Deluxe mk2 for years...don't miss it

Good on ya Josh - Bring on the PodGo & HXStomp demos with the FR10. I've gigged it a few times and it's solid on a small stage enviroment.

Good job Josh. I bought my POD Go 3/2023. It was rough getting started. I use the snapshot mode mostly so I can hit 1 button when I am lead singing the song. But I use the same patch in stompbox mode to because I found when I am not singing it gives options in each patch that does what I need when I am being just the guitar player. Handy tool the POD Go is. I modified my Deluxe and Blues Jr. amp gain stage configuration to the original Bassman with the JTM45 High pass filter and reduced the Bright cap to 1/10th of the bright. Really sounds good after 20 years of experimenting. So, I run my amp at in the clean and with some tube crunch for my bands. I use all Celestion G12-65s in the amps. Because if the risk of tube amp failures at a gig, I am struggling with the sound of the amp/speaker models sounding right. I just bought the Celestion G12-65 IR pack. It's still not happening. I will give the US Double Nrm that you used in the video a try. I didn't see the bright options the first time I gave it a try. Thanks for pointing that out. Wish me luck. Cheers!

Riverside in the thumbnail....... Not in the video.

I use th IR-2 with the cab off into an EHX magnum 44 into a cab, 4x12.

I don’t think the FR10 will like your pedal board. Like the Powercab they expect a hefty input signal to work properly. I use a Helix Floor and an Iridium based pedalboard into a Powercab. The Iridium needs the input boosted by +12db (done on the Powercab) to get level with the Helix. Your IR2 might produce the tone but it will be at instrument level, not the required line level. I really hope I turn out to be wrong.

Dude come on … No better then that pod go you worked so hard on… need to pull that mic back off the speaker 6 ft or so for a live setting… huge difference….

Why do you keep switching stuff .. What’s the problem w your pod Go … I sent info on your future Vid … check it out.. thx It’s all very similar stuff Helix giant board .. But great …

Hi ther it’s me agin I have a pod go also I’m doin what your doin with a pedalboard however.. My pod go is wireless I really like the unit on the pod go so what I did was add the pod go to the beginning off my pedalboard to use the wireless unit then you have added everything To your board really works great …so Pod go … 1/4 6 ft other side of mic stand into My pedalboard out to source …. You use the benefit s of the pod go Amps extra speakers Anything to enhance it Ok hope you get it … This is useful to you I’ve been watching you create patches for some time so thought I’d help out .. Oho one other thought boost after the pod go seems to work great .. done .. peace

Ok hi there I have the pod go .. Everything you say sound right . Pre set sounds good My one word of advice Is to move your mic that’s at the speaker back .. 4,5,6,7 ft till happy it’ll give you a much better live sound Your move air like a real cab … anyway hope it’s helpful try it …

Not a bad idea here....but for a better sound and much better response why not try a HX stomp and a tone x....just a idea 👍🏻💯

i have the headrush 108, it reveals the true results of what you put into it. I tried the headrush pedal board, yuck. now I've gone Friedman IR-D and the fender fr10. very happy, kept the headrush 108's for band fold back and they are great stage monitors. there's an out on the back of the fender fr10 that may work to go DI to desk, or maybe with the friedman, i may put a DI box on pedal board and send to desk and through to fender fr10

Hey Josh, what made you pick 10 not 12? I think the weight difference is minimal, I'm waiting myself on my 12, so I'm curious on your decision driver..

For modeling I always use a high cut from 3.5 to 5kHz. Most real cabs work from 100Hz to 5kHz