Відео

Appreciated, cant count how many times your videos helped me. I have a Panthera hunter and my pin probe had play in it. Thought it was how it was supposed to be. Was having issues getting my new Maple mags to load a pellet. Had to either flip the gun upside down or advance the mag a tiny bit to get the probe through. Removed the plate and found the 1.5 screw loose, almost ready to fall out. All is well now and new mags work.

Please Fx royale400 complete regulator rebuild guide video

Hi there thanks for video, you helped me out on my Dreamline a few years ago and now I was wondering if you can help me now, I bought a used Widcat MK2 and the trigger rod and blade is at a 7 o’clock position really way back in the trigger guard which doesn’t feel right, 1st and 2nd stage feel ok but I want the trigger back at the 6 o’clock position but don’t know how to go about it, I undone the air cylinder clamps to try that way but with no luck, the whole linkage seems too far back. Do you think if I take barrel out and try moving clamp on air cylinder that way would give me the adjustment needed or is there some adjustments on the trigger linkage as there are small threaded rod with small nuts on. Thanks for your time, Steve.

So the fx maverick manual and Ernests video says the first screw closest to the trigger is the 1st stage, and the next screw is the 2nd stage. They are absolutely wrong. You're correct. The screw closest to the trigger is the second stage. How could the manufacturer put it wrong info, and you're the only one that got it right?

so how do you increase reg pressure just turn the Allen screw on outside

That’s exactly what just happened to me. The lever went forward by its own, double loading. Tapped it back to remove one slug, didn’t come off. Couldn’t push them the other way around either, so then I tried to shoot them. Well, when I pressed the trigger, the first one didn’t move forward, instead, the rear one was fully penetrated by the slug probe, damaging the o-ring and letting a bit of air escape during each shot. Luckily these o-rings are cheap.

If you can mention all the fx maverick o rings size i will appreciate it.

Great demonstration

Hello Newman, I purchased this reg piston tool from Bullet Central, It did not come with o-rings, Bullet Central told me they don't have them and to return the tool. Can you please tell me what size are the o-rings and if there is something else missing that prevents the tool from holding the piston ?

Mate you safed my rifle because my valve Pin broke now ita workin again danke diggah

can you explain little how the stop affects the power?

Do you know what size thread output ? The one fit in the gun.want buy some adapter put in another gun.

Not changing the hammer?

Where and when can someone buy this?

I have a brand new Dreamline .22 out of the box shooting 733fps with a 21gr slug at 100bar, turned reg up to 140 now only getting 633fps, any ideas?

Great video's on the FX range . I have a DRS and it's trigger is so light where as I prefer a bit more feel . Have you made any videos for the drs trigger? Many thanks for your help 😃

I have a drs and the trigger is too light but this looks like a complete fiddle to adjust 😮

Where can I order one tool like this? Thanks.

I have a Dreamline compact and am hoping I can set it up to hunt small pigs under 30 yards. I was told I could use 25 grain pellets.. what grain were you using here? Can the Dreamline compact put out enough air to shoot a 25 grain pellet fast enough to kill a pig? Thanks for any guidance.

You got a link to that wrench

No don't use RED loctite!

If the liner lock is tightened too much, will the barrel bend or will there be a difference in accuracy?

That bore regulator Oring 10x1.25 i think, is it on crown MK2? Man i nearly swear i dont have that oring, i cant find it and i even cant feel it there, i pass my picker trying to feel any soft thing but all bare metal no oring there yet i do have a leak in atmospher hole, it really drives me crazy...

FX impact M3 is leaking from the barrel. What is the problem? What items do I need to change

THAT ON FX WILDCAT MKIII BOTTLE

MY HAMMER SPRING BROKE GOT NEW ONE AND IT WILL NOT BREAKE AIR AND LOCKS UP MY COCKING LEVER WHEN I PULL COCKING LEVER OPEN AIR COMES OUT

Thanks for the video! Can you do one one the trigger of the DRS?

Вітаю. Де я можу замовити цей регулятор в зборі зі Швеції?

Your disassembly and assembly video is the best that i have watched. I rebuilt my regulator on my Mk1 crown this morning and it still leaks out of the weep hole...do you have any ideas on what it could be? thanks again for sharing!

How about the exstended plenium that does not have that plug ?.

Looking for hammer spring for fx wildcat MKIII 22CAL sniper

this helped me so much thank you! most in depth and explained everything

Hey Newman would you say the dreamtac compact in 22 has the shortest barrel liner fx has ever made?

Valve pin in my Dream line keeps breaking & now the hole where the pin goes in has become bigger!

Now, where can you find the replacement regulator screw o-rings?

Good morning friend, as I didn't have this C1 tool, I tried tightening it with another wrench, and I only managed to tighten it up to 6.2 mm. Could this difference cause any problems? Thank you in advance, and a hug from Brazil.

Good afternoon! Congratulations on the excellent explanation about the FX Crown Mk2 regulator. I need help because the regulator valve of my FX Crown mk2, when pressure is applied, both pressure gauges show the same pressure. I have already replaced all the seals without any result. Can you advise me on what I should do to fix it? Thank you.

Boa tarde! Parabéns pela excelente explicação sobre a reguladora da FX Crown Mk2. Preciso ajuda, pois a válvula reguladora da minha FX Crown mk2, quando colocado pressão, os dois manômetros marcam a mesma pressão. Já substitui todas as vedações sem resultado. Podes me orientar sobre o que devo fazer para consertar? Grato

well,is there news already about the new release time???

When not using can I let the air in the System or does it damage the gun?

Wich oring causes a leak from the small breathing hole on the side of the adapter ?

Thank you for this video, appreciated, good job.

I think i need seal 11. The second plenum to the tube adaptor. All i did was take off my bottle to store for spring and summer as i use thr maverick for fall and winter because i have a night scope on it. Anyway, when i screwed my bottle back on air was gushing out the back of the plenum. I could eveb see an oil film coming out the connection there. Can i ask, what is the easiest way to get to that seal vs needing to pull the whole gun apart. Thanks!!

Very well explained 🇬🇧🇬🇧🇬🇧🇬🇧

What attracted me to FX was the high shot count I just want to clarify that this is correct before I purchase the gun. The shot count for slugs seems unusually high. I could be wrong. I copied this information from the FX USA website. Maybe somebody made a mistake at FX. If so can you contact FX and inform them about this issue and ask them what the correct shot count is? The FX impact mk3 shot count per fill: Quote from FX: "ft/lbs are maximum fac power output using slug ammunition and a slug power kit." - 22 cal has 330 shots - 25 cal 160 shots - 30 cal has 105 shots." So isn't the FX website saying that you're going to get 330 shots using slugs and the slug power kit? The FX King shot count using FX hybrid slugs according to the FX website at 900 FPS. -126 shots 22 caliber 22 grain FX hybrid slugs - 96 shots 25 caliber 26 green FX hybrid slugs - 56 shots 30 cal using 44 grain FX hybrid slugs Can you clarify this for me?

Thank you! How about DRS Pro? Can you please help.

Appreciate the videos , keep em coming 👍🏻

Thank you 👌🏻👌🏻👌🏻

is the mk2 plenum available?

My fx maverick vp did not came with this seal, also it does not came with o rin on the middle of the transfer port and o rings inside the barrel too. Also it is hard to cock it, cycle is like rusted and it is stiff at the end of the cycle, not smooth in any king. I check and set timing with 2 set screws on the rod but it isnt hel a lot... Any word abouth that please?