Відео

I have the same screen but my mph doesn’t seem to work? Help?

Thanks so much i had no idea how to switch to mph or reset odo

Can you explain p13 please

I have error 07 what does this mean

Life saver thanks

Does anyone know how to reset the factory settings?

Wow! I just bought this controller and UA-cam knows I needed to see it. Amazing!. Good job thank you’!

Life saver thanking you

if you didn’t go as fast maybe i could build the bed

How do you get rid of the constant smear/hand prints?

jus copied this and bike stopped working

I don't understand where to put the exra wire. Yes in the cup but how. It ruins the "screw" bit cause the wire wont go straight down anymore. Been doing this for two hours now and I can't get it to screw

Hello, I just installed one of these kits but I get a ringing noise when I apply the back brake, do you get this or know how to stop it! I have made sure it is perfectly aligned and cleaned sanded the pads etc.. Cheers

very helpful, 1 question, the magnet types im unsure what to set mine to as i have a 1500w motor

The only way to avoid a wren kitchen disaster is dont buy one brothers just paid £15 grand thay are not worth it full of problems honist save ye money and go somewhere else promise you

Hi I played around with tge settings not knowing what I do and then well now It's not normal I guess It's because I don't know P07 and P13. Is there a way back to default mode?

Can’t hear ya properly over the backing track.

Did the parts and instructions they provided to mount on the wall work for drywall? Or did you have to use an anchor to make it secure?

Most helpful video I’ve ever watched.

Where did you use heat shrink to make it waterproof ?

How's this solution working out for you? I got a PIR sensor electrical plug to use on my Christmas tree and really enjoyed it until the forced-air heating started triggering it. What kind of false triggers have you experienced? Based on my experience with that PIR plug, for my Jack and Jill bathroom issue, I don't consider PIR alone will be adequate. I think it would be good to add to the poster that the doors unlock automatically if the power goes out.

It's easy if the missing part is a bolt or a screw, but if a structural part is missing from the box, and you didn't check it within 14 days from the purchase, then you're basically screwed. I've just realized that I've thrown €600 out of the window, because one leg of a fancy desk I've bought a couple of weeks ago is missing. My bad, my fault, I didn't check the package right away. The lovely telephone consultants and helpful customer service employee at the store were doing what they could, but there's nothing that could be done and they are very sorry. That's it, I probably need to improvise it myself.

Mine has pincode in the settings menu

Thank you

Holding top 2 buttons the screen will go into another menu then pressing the same 2 buttons you can cycle through to display actual battery voltage an voltage drop in use

Hi mate have you got video on the nuts and bolts go on the rear dropouts?

Genius idea💡 , I taught I need a bracket with the hook, so I’m glad I watched this video, so I don’t need the bracket, only cable ties 🤓

My cheap Ebike has a similar power switch, but a different controller. The manual does not state how to change settings, though the P codes appear to be the same. I will try your instructions on my bike at first opportunity.

It all comes down to the installer you get and if they’re good at installing kitchens. The cabinets themselves are fine.

This was a very helpful video. I have a problem that just started. The PAS works great but the throttle tops out at 12mph. I can PAS pedal to 28mph..what gives?

my throttle lags any thing I could do about that?

Brilliant videos 📹 as always cheers 🍻

2 tips before you buy a wren kitchen 1 don't bother and 2 look somewhere else for a better kitchen brother has just paid 15 grand and fitting a total mess believe me mess

Honestly am given you advise before you waste your money don't bother with a wren kitchen nothing but problems shxte

Hiya so my screen arrived sw900 it has two connection ports a 5 pin and a two pin ,I have no idea where the smaller two pin goes, I have fitted the 5 pin and I followed your set up , but nothing registers on the screen but the bike works on pas and horse off far to fast , mph not workin , watts not working but the screen illuminates with battery at 75% , obviously the two pin goes some where is your SW900 like this .?

Are kids just paid 15 grand for a wren kitchen fitting apsulute rubbish DONT bother 😭

"promo sm" 😥

The 'quality' of that installation is so outrageously bad!

Hi, do you have a link for the analogue sticks please.

Jesus. Punched a hole in your roofing felt rather than running it through the overlap. I’d have gone spare as that’s going to leak at some point. What a bunch of cowboys. I think you need to get a review of the installation and issue a court action against them. Refusing you guarantee because you didn’t sign it? If it is the same company as the one on the internet with the same name but no space between the first 2 words it seems that they complain about their customer bullying them. From a legal stand point they are in breach of the consumer rights act especially if this was within the first 6 months so I would have put it to him in writing he either responds as requested or you would have to take the matter under legal advisement. With that level of workmanship I would probably not let them back on site and gone for a independent expert review and then hand it over to a solicitor. Make sure you have family legal on your house insurance and then get them to pay for the court case. It makes my blood boil when people in business make comments like you refer to. You gave them instruction, they accepted the job, did the work and you paid them money. A contract exists and is governed under the consumer rights act.

Get £200 off a Wren kitchen here artfulbodger.online/wren-referral

Anyone interested in the installer that let me down, it was Tech For Energy.

This has been a great help mr Bodger ….my new screen comes in 7 days I can wait to install it 👌👌

I think it encourages incest lol I think we should go back to one main toilet and bathroom for the whole household !!

If you're still trying to decide where to get your kitchen, this might be of use. I did a load of research and decided on Wren. If you decide to go with them, use this link and you get £200 off! artfulbodger.online/wren-referral

Great video

For anyone installing this kit the Open Source Firmware is essential. It'll allow you to bring the cadence up and improves the ride immensely. You can also change the assistance levels as the difference between off (cycling through treacle) and level 1 (easy riding) imo leaves no in-between

Tip 2 is poor advice as you pay way over the top for the kitchen being fitted, plus many of their fitters are poor at best.

Thanks a bunch

Lol. Now you have to paint the ceiling after marking it up with a pencil 😂