Thanks so much. I've had to replace both of those blend doors in my 2010 Traverse, all within 5 months of each other. They're a tight fit to get to, so had I known, I would've done them both at the same time. Your video saved me lots of $$$
Thanks for helping out your fellow man ! I appreciate your time and I ordered the part today! Awesome! Dealerships are crooks if they charge what others are saying. Unreal.
Glad I can help. I went an entire winter before I figured out the problem. The dealer tried to tell me it was a broken chamber door. $450.00 job. crooks
This just happened to me as well. I had just replaced the battery and I read in a few places that this can happen right after a battery change which lead me to your videos. You can also buy these on Amazon or eBay or auto parts stores. There are 2 more of these devices, one on the driver side and one on the passenger side that control the hot/cold blender and they are all the same part. For me 2 went bad, the one he replaced in the video and the one on the driver side for hot/cold.
Hey buddy do you have a part number for the new one? I am trying to replace ours and I want to make sure I've got the right one. My options at the parts store: one is for auxiliary and one isn't. I compared my original part number to yours in this video and they match. Just wanting to make sure I get the right replacement. Thanks for posting this!
My friend I have a problem with My Chevy Traverse 2011 and its a little bit annoying I start to hear water behind the dashboard and later on it damaged the "fan" front of the passenger seat , I replaced It but the water still there!! lately i knew that the AC drain line is clogged I don't mind to pay money to fix but the problem when i went to the mechanic he said its going cost you about 1000$$ "we will remove the dashboard!!!!!!" I saw some videos for the other cars to how to open the clogged; but I couldn't find the drain line. can you help me out by showing a video for where this drain line located? thanks and sorry for the long message.
hello. My actuator T3983001 has a resistor burned R1. Please, I need to know the code or colors for this resistor R1 for replace. I can`t see the color lines in my burned resistor. thank you
Are u in NY? I can clear for u $150.00. or u can clear your self. locate drain line under car. just off center towards the drivers side. ( within chassis cross bar) use something flexible but stiff like old metal hanger and push in tube to remove debris in drain tube. good luck
Thanks so much. I've had to replace both of those blend doors in my 2010 Traverse, all within 5 months of each other. They're a tight fit to get to, so had I known, I would've done them both at the same time. Your video saved me lots of $$$
This just helped me in more ways then one
Great job with the description. You kept it simple and you saved me a lot of moolah💰Defrost works great now 👍
Well done! Perfect video! In, out, done. No BS. Thank you!!
Thanks for helping out your fellow man ! I appreciate your time and I ordered the part today! Awesome! Dealerships are crooks if they charge what others are saying. Unreal.
Thanks a ton man. I just changed mine out. Saved me a car payment's worth of money.
Glad I can help. I went an entire winter before I figured out the problem. The dealer tried to tell me it was a broken chamber door. $450.00 job. crooks
That’s what I’m talking about!! Good looking my guy thumbed up and shared. Thanks for the knowledge
Good video. That's my next project on my GMC Acadia. Looks like a tight squeeze for those screws. May try to rig a tool same as you.
Thanks for this. It saved me tons of time.
This just happened to me as well. I had just replaced the battery and I read in a few places that this can happen right after a battery change which lead me to your videos. You can also buy these on Amazon or eBay or auto parts stores. There are 2 more of these devices, one on the driver side and one on the passenger side that control the hot/cold blender and they are all the same part. For me 2 went bad, the one he replaced in the video and the one on the driver side for hot/cold.
are they both the same part number/part?
Thanks brother .. that just happened to me with my traverse..
Huge help thank you
Hey man thank you!! Seriously
Welcome. Glad it helped
which one is for replacing the passenger side mine blows cold on passenger
thanks bro, my danm defrost dont work and im stationed in Washington. i actually had ice on the iside of my window.
Hey buddy do you have a part number for the new one? I am trying to replace ours and I want to make sure I've got the right one. My options at the parts store: one is for auxiliary and one isn't. I compared my original part number to yours in this video and they match. Just wanting to make sure I get the right replacement. Thanks for posting this!
What about for the rear ac? Both my front and rear ac so not work for cold air. it just blows.
mine does the samething
I can't say for sure but u can always remove ur old 1, leave the power connection and see if it moves. good luck
what's the name of the tool you used?
My friend I have a problem with My Chevy Traverse 2011 and its a little bit annoying
I start to hear water behind the dashboard and later on it damaged the "fan" front of the passenger seat , I replaced It but the water still there!!
lately i knew that the AC drain line is clogged
I don't mind to pay money to fix but the problem when i went to the mechanic he said its going cost you about 1000$$ "we will remove the dashboard!!!!!!"
I saw some videos for the other cars to how to open the clogged; but I couldn't find the drain line.
can you help me out by showing a video for where this drain line located?
thanks and sorry for the long message.
I left u a solution on my channel
I got the part but man this is impossible ito change. I try for 3 hours and nothing
hello. My actuator T3983001 has a resistor burned R1. Please, I need to
know the code or colors for this resistor R1 for replace.
I can`t see the color lines in my burned resistor. thank you
I do know the color. I got rid of the old 1. sorry. probably easier to replace the entire part
If the air is cold on one side but stays hot on the other could this be the same fix?
same way to fix but it's the other actuator a little more towards the back.
Has anyone had problems with the windows??
Yes. If the problem is only @ the drivers door, just order a new master window switch from Amazon
@@kaize111 it’s my passenger front and back , they go down but won’t go up
Are u in NY? I can clear for u $150.00. or u can clear your self. locate drain line under car. just off center towards the drivers side. ( within chassis cross bar) use something flexible but stiff like old metal hanger and push in tube to remove debris in drain tube. good luck
+kaize111
no I'm actually out of US
+kaize111
thanx anyway >>> and if I succeeded Ill let you know