had the same problem go with honda they are very reliable i sunk mine on the second day of owning it and drained my air box and started it and blew the water out the exhaust and it runs perfectly and doesn't smoke definitely go with honda
Jacob8091 so i used a 5’ 2” diameter pvc, two 45° 2” pvc’s, two 90° 2” pvc’s, and 1.75 inner diameter 20ft clear hose, 1/4 inch inner diameter 10ft clear hose, 10ft 3/8 inner diameter clear hose, and I’d suggest a 1/2 inner diameter clear hose for the crankcase breather. Also some silicone and gasket maker, and dielectric grease for electric connections, don’t forget the pvc cemet
I bought it off of Ebay, but it is the same thing at high lifter website. Yes, it comes with vent line and bellows. What's in the video that's what it comes with, except abs cement, silicone, dielectric grease, hole saw.
Is this the same thing as a 2001 honda foreman rubicon
Getting my kit today hope everything works out
can you make a list of the parts that came with the kit for the vent lines
I did everthing just like this but my gas vent line shoots gas out at you does anybody else have this problem
Yes I had that, when its hot, the tank has pressure and it happens when you have a full tank, it's ok
What about Trans and crankcase breathers?
👍
Great video! I appreciate it. What is the stuff you refer to for keeping your fuel line from chaffing? Loom? Lume?
Loom
Could my 2013 Honda rancher 420 4x4 use these same instructions to do this
What size is the stock snorkel but to run a 2inch hose to the snorkel like what size adapter would I need to run the hose
Got a rancher 420 new
wonder if the snorkel will kick the warrenty ?
Ask your dealer
Could I extend my fan line up my snorkel?
You probably can, maybe you'll need extra line
tires and wheels?
I’m looking to get a four wheeler. Which one should I get. I wanna can-am but also a Honda and I don’t know what to cop.
had the same problem go with honda they are very reliable i sunk mine on the second day of owning it and drained my air box and started it and blew the water out the exhaust and it runs perfectly and doesn't smoke definitely go with honda
hey man thinking about getting this for my 500 does it have any restriction or is it some what close to a 2 inch pipe?
Is the bellow sealed?
What size wheels are those? Also what is the offset?
Will it fit a 2020 Honda rancher ?
I am not sure, the snorkel kit may be a little different because the 2020 has different style racks, but high lifter snorkel i think sells for 2020
no, and if u get the 2020 I recommend beveling 3" pvc that goes into intake of airbox and using 2 u bolts to hold bracket
What if mine no have screen is it different
It’s older probably under 2005 so it most likely will not work
Hey can I have a parts list
Is this the silicone one or the normal one?
Do the hoses and stuff come with the kit??
Yes
Will this work on a Honda Rancher es 2002?
No I think it has deferent sized rails
Where did you get the snorkel
What is the part called that all the vent lines go into
Differential bellow
what if i have no rack
Can you share me the link for that
Just go to highlighter.com and you’ll easily figure it all out
Will it work for a Forman 500
Yes it should if the metal racks on the front look like mine, and you have an extra tube in the back, make sure you silicone it
Is the snorkel kit worth it even if you dont plan on going deep unless you have to?
To me I believe its worth it, for just in case. You never know how deep of a hole you end up in.
It’s better to spend 200$ on snorkel then 2000$ on new motor way I see it
spent 60$ for my snorkel, just went to lowes and got pvc and hoses for ventlines
Frank Akpik what is all the stuff needed for it like vent lines all the pipes
Jacob8091 so i used a 5’ 2” diameter pvc, two 45° 2” pvc’s, two 90° 2” pvc’s, and 1.75 inner diameter 20ft clear hose, 1/4 inch inner diameter 10ft clear hose, 10ft 3/8 inner diameter clear hose, and I’d suggest a 1/2 inner diameter clear hose for the crankcase breather. Also some silicone and gasket maker, and dielectric grease for electric connections, don’t forget the pvc cemet
What year is you rancher and did you buy the silicone snorkel or the cheaper one?
Did the vent line clips come with the purchase of the snorkel?
Yes
I Saw I hole that was not sealed in the bottom of the air box. How come you didnt seal that hole?
I've been deep and water doesn't go through that sight cup
Will it fit a Honda Forman 06 😬
I dont think so
Outdoor Ed oh ok thank you
What's the link for the snorkel
On ebay
whats the size of name and size of that pipe by the engine?
I dont know the size, its a flex pipe from high lifter snorkel
what year is the atv shown in the video
2019
Where did you get the connectors or what are they called
Are you talking about the connectors that connect to the vent lines? If yea they are called barb fittings
Outdoor Ed ok thanks
Hey man where r u from do you charge to install that
I'm in pinellas county Florida
Did you just buy the kit off high lifter website? And does all of the vent lines and everything come in the kit?
I bought it off of Ebay, but it is the same thing at high lifter website. Yes, it comes with vent line and bellows. What's in the video that's what it comes with, except abs cement, silicone, dielectric grease, hole saw.
Outdoor Ed thank you
What snorkel kit did you use
Highlifter
Link ? Please
Awesome vid also