Your video just save me from taking apart a piece that I had worked on for a long time so thank you! I thought my piece was hopeless but as you pointed out there was looseness because I needed to set it all the way up the sides. I didn't really understand setting until now - your close ups are just great. Merry Christmas!
There's a diamond tip attachment that makes a gorgeous texture. I absolutely love my foredom hammer hand piece. Like you said, it really makes setting bezels a breeze when you don't a lot of hand or arm strength due to injury or whatnot. Thanks so much for the video! :)
Sorry about that 😅 I tend to speed stuff up that is basically the same thing over and over. I will be using this in some upcoming videos so I will try to leave in a little more 😁👍
Very nice video and subject. I think my fav shop sells that hand piece here in Perú, we are in 100% lockdown(the only way) but I appreciate this information. 🇵🇪
You make excellent graving tools for this handpiece using tungsten tipped darts. Just cut the dart body to the required length, then drill and tap a 3mm hole in the end opposite the point. then screw/loctite an m3 grub screw into the hole, allowing enough screw length protruding to screw into the handpiece. Drilling a small hole through the dart body allows a Tommy bar to be used for tightening….grind and polish the dart point/shaft to the required shape…easy peasy
Is there any way you could do a video on how to get the back plate on a bezel that deep dark black I’ve seen on pro pieces? I’ve tried liver of sulfur, jet, Midas black and another one but so far nothing gets the silver that super rich dark black. I’ve tried asking other jewelers but they are stingy w sharing. I’ve tried heating the metal, the los etc. thank you and bless you for all you share! You’ve helped me and others so much!
Does the polishing compound get the scratches out ? I am learning how to polish out the scratches on a piece after assembling it. However there is so much info out there I don’t even know where to start 😳 Help !
I really appreciate this video, so thanks!! Have a question: can you use the original tip that the hammer hand piece comes with to set stones, or do you need to have the bezel-pusher tip?
Hi There, just wondering what solder you would use for jewellers bronze/red bronze? And brass? I am having a hard time finding anything other than Silver or Copper. Gold is too expensive.
1)How did you wash the piece at the end? (After polishing ) I’m always worried too wash once stone in. 2)also, earlier in the video you showed a small Nick created from the hammer hand piece And you said that it could be polished out.?
What head did you use on the hammer? Also, what is the name of the disc that you used to polish the metal? I still haven’t figured out the polishing technique! Every time i think I’ve got it I end up using the wrong disc and I end up ruining the piece because the disc was to aggressive! I just purchased the hammer and it came with one tip. It’s not the one you used. (I haven’t used mine yet but want to make sure I use the correct tip). Thanks! T
Hey i wanted to ask you about this hammer adapter, if you know. They say on the foredom site i think or Rio Grande and in the jewelers tool shop in my area, that you should better buy the flex shaft that it is for the hammer tool because it has less power and starts from 5000 rpm i think i dont know. Because with the usual one even with the foot petal its too difficult to achieve that slow speed and if you use it in more than that, its likely you break down your flex shaft. So i was thinking have tried it with the usual foredom (i have the SR cause its 220v i live in Europe) or could possibly connect it to a dremel flex shaft or other brand that you could lock the speed at 5000 or even less and get on with it? What's your opinion, thanks in advance. (my take is they all say the same thing, so that they can sell you the second shaft, too much expence for now)
I just got my foredom hammer hand piece and it won’t connect to my foredom flex tool!! It’s second time! I returned first one cuz it didn’t work, and now this one doesn’t .... what the hell .........??????!!!! Do I do now!??
Me again ~ could you possibly do a video on cleaning up your metal from start to finish? Maybe pointing out each individual disc as you go? It would be a great help not only for myself but to others who struggle with the same issues. There are a ton of videos out there but none walk you through step by step. Again, thank you so much and, thanks for sharing!
Save $30 on orders over $100 from Pepetools.com with code MEOW at check out 😁👍 H.15 Hammer Handpiece: Pepetools - bit.ly/h15hammer Amazon USA - amzn.to/39HRzBs Threaded Anvil Points Foredom 6 Piece Kit: Pepetools - bit.ly/H15HammerTips Amazon USA - amzn.to/2V6GpRv Foredom Flex Shaft With H.30 Handpiece: Pepetools - bit.ly/K2230 Amazon USA - amzn.to/34hwMUe Straight Burnisher: Amazon - amzn.to/2wfCnxy Fabulustre Polishing Compound: Amazon - amzn.to/3aM7YWD Silicone Finger Protectors - amzn.to/2xN46pZ If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that that I'm updating all the time so bookmark it to stay up to date GomeowCreations.com/tools-and-materials and GomeowCreations.com/partners-discount-codes *If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*
It’s a great tool for people with arthritis and hand joint issues. Thanks for sharing.
Your video just save me from taking apart a piece that I had worked on for a long time so thank you! I thought my piece was hopeless but as you pointed out there was looseness because I needed to set it all the way up the sides. I didn't really understand setting until now - your close ups are just great. Merry Christmas!
I'm happy to here that I was able to help 😁👍
Thanks!
Do these exist for regular flex shafts, meaning not a foredoom ?
Nope
An excellent video thank you for making it and sharing it with us.
This tutorial came out at the PERFECT time!!! My hammer handpiece is being delivered today. Thanks for sharing!!!
Oh cool, let me know how you like it once you have time to use it a little.
@@GomeowCreations for sure!!!
I just got mine today 😁🤘
There's a diamond tip attachment that makes a gorgeous texture. I absolutely love my foredom hammer hand piece. Like you said, it really makes setting bezels a breeze when you don't a lot of hand or arm strength due to injury or whatnot. Thanks so much for the video! :)
Best Teacher on UA-cam
Thanks for all your great videos
Well thank you very much 😊 I really don't think I'm the best but it does make me feel good to hear that 😄
Thank you.
Thank you so much for this lovely video!!
Very nice too!
What a fantastic tool and super useful video, thank you!
Well thank you very much 😊
Enjoyed your video. Thanks for sharing!!
I got the same one , and I love it. By the way , the end results is incredible.
Thanks 😊
Thanks for the beautiful tutorial!
Do you have a video tutorial for the bail and the part without the stone?
Thanks 🤗
I think I go over that in this video ua-cam.com/video/KWIGg1_clL4/v-deo.html 😁👍 If not let me know and I will add it to my list of videos to make haha
thanks for sharing, would have been nice to see some of the work in with the hammer tool in real-time though!
Sorry about that 😅 I tend to speed stuff up that is basically the same thing over and over. I will be using this in some upcoming videos so I will try to leave in a little more 😁👍
Can we use this with a dremel??
Wow this looks so helpful
Very nice video and subject. I think my fav shop sells that hand piece here in Perú, we are in 100% lockdown(the only way) but I appreciate this information. 🇵🇪
No problem 😊👍
You make excellent graving tools for this handpiece using tungsten tipped darts. Just cut the dart body to the required length, then drill and tap a 3mm hole in the end opposite the point. then screw/loctite an m3 grub screw into the hole, allowing enough screw length protruding to screw into the handpiece. Drilling a small hole through the dart body allows a Tommy bar to be used for tightening….grind and polish the dart point/shaft to the required shape…easy peasy
Is there any possibility of there being one for a dremel?
I don't think there is one for the dremel, sorry 😀
What polishing compound did you use for this one?
Thank you for all your videos!
amzn.to/34yXbBe this is what I'm using for most of my polishing
@@GomeowCreations hey man thanks for the quick reply! I appreciate you
thanks for sharing the hammer. I do have hand problems. :D
Genial !!👌
Great video, thanks for sharing it. I do wish you had said what gauge bezel wire that was. Looked like 20g?
Thanks and if I remember right that was 0.32mm fine silver bezel wire. You can match that size up to a gauge and you should be good to go. 😁👍
@@GomeowCreations Approximately 20 gauge. :) I forget that some places in the world don't use 'gauge' measurements.
I’ve needed this too- I broke my wrist so normal setting is painful right now.
How many broken stones?
Is there any way you could do a video on how to get the back plate on a bezel that deep dark black I’ve seen on pro pieces? I’ve tried liver of sulfur, jet, Midas black and another one but so far nothing gets the silver that super rich dark black. I’ve tried asking other jewelers but they are stingy w sharing. I’ve tried heating the metal, the los etc. thank you and bless you for all you share! You’ve helped me and others so much!
Your going to have to send me a picture of what you are talking about so I know that you are looking for.
GomeowCreations@gmail.com
Does the polishing compound get the scratches out ? I am learning how to polish out the scratches on a piece after assembling it. However there is so much info out there I don’t even know where to start 😳 Help !
Yes it does to a point. If they are too deep you will have to clean them up with some sanding wheels and then polish it. 😁
I really appreciate this video, so thanks!! Have a question: can you use the original tip that the hammer hand piece comes with to set stones, or do you need to have the bezel-pusher tip?
Yeah you can. I like the bezel tip because it is bigger and leaves less tooling marks,
Great video! Where can I buy such a cabachon?
ebay.to/34jYHTl 😁👍
GomeowCreations thank you so much! 😊
Hi There, just wondering what solder you would use for jewellers bronze/red bronze?
And brass? I am having a hard time finding anything other than Silver or Copper. Gold is too expensive.
1)How did you wash the piece at the end? (After polishing ) I’m always worried too wash once stone in.
2)also, earlier in the video you showed a small Nick created from the hammer hand piece And you said that it could be polished out.?
What thickness of silver would you recommend? sorry missed it in the video
Well, for what part?
@@GomeowCreations sorry didn't realise video had changed. i will comment ton the correct video
oh man very nice!! subscribed
i wish you gave more info on what you used to polish.
This might help a little ua-cam.com/video/zS3-3pBb0rU/v-deo.html
What head did you use on the hammer? Also, what is the name of the disc that you used to polish the metal? I still haven’t figured out the polishing technique! Every time i think I’ve got it I end up using the wrong disc and I end up ruining the piece because the disc was to aggressive!
I just purchased the hammer and it came with one tip. It’s not the one you used. (I haven’t used mine yet but want to make sure I use the correct tip).
Thanks!
T
Hey i wanted to ask you about this hammer adapter, if you know. They say on the foredom site i think or Rio Grande and in the jewelers tool shop in my area, that you should better buy the flex shaft that it is for the hammer tool because it has less power and starts from 5000 rpm i think i dont know. Because with the usual one even with the foot petal its too difficult to achieve that slow speed and if you use it in more than that, its likely you break down your flex shaft. So i was thinking have tried it with the usual foredom (i have the SR cause its 220v i live in Europe) or could possibly connect it to a dremel flex shaft or other brand that you could lock the speed at 5000 or even less and get on with it? What's your opinion, thanks in advance. (my take is they all say the same thing, so that they can sell you the second shaft, too much expence for now)
I just got my foredom hammer hand piece and it won’t connect to my foredom flex tool!! It’s second time! I returned first one cuz it didn’t work, and now this one doesn’t .... what the hell .........??????!!!! Do I do now!??
What shaft do you have? I'd doesn't fit all of them
Never mind, I went all in and bought the foredom classic set with hammer from PepeTools 😂
wow, nice tool, even if it looks like an Atlas rocket!, hope it's not armed :-)
Me again ~ could you possibly do a video on cleaning up your metal from start to finish? Maybe pointing out each individual disc as you go? It would be a great help not only for myself but to others who struggle with the same issues. There are a ton of videos out there but none walk you through step by step.
Again, thank you so much and, thanks for sharing!
Badeco 220 RL, the best there is. Still.
Save $30 on orders over $100 from Pepetools.com with code MEOW at check out 😁👍
H.15 Hammer Handpiece:
Pepetools - bit.ly/h15hammer
Amazon USA - amzn.to/39HRzBs
Threaded Anvil Points Foredom 6 Piece Kit:
Pepetools - bit.ly/H15HammerTips
Amazon USA - amzn.to/2V6GpRv
Foredom Flex Shaft With H.30 Handpiece:
Pepetools - bit.ly/K2230
Amazon USA - amzn.to/34hwMUe
Straight Burnisher:
Amazon - amzn.to/2wfCnxy
Fabulustre Polishing Compound:
Amazon - amzn.to/3aM7YWD
Silicone Finger Protectors - amzn.to/2xN46pZ
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that that I'm updating all the time so bookmark it to stay up to date GomeowCreations.com/tools-and-materials and GomeowCreations.com/partners-discount-codes
*If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*
Please stop over explaining everything...
No.
lol
Are there generic hammer handpieces that fit with othe flex shafts?
Not that I know of.
I’ve needed this too- I broke my wrist so normal setting is painful right now.
Well this is the perfect tool for you right now 😁👍