You were into the demo only a very short time and you solved my issue. i had over pressured the tank (tank said max pressure 100psi so I put it at 40) and it worked for awhile, and quit. Backing off the pressure to 7-8psi made it work, (I had replaced the filters). Thanks again.
I have an RO System Water Purifier with 5 stage inline filters. 1. Sediment Filter, 2. Pre-Carbon filter, 3. RO-Membrane filter, 4. Post-Carbon filter and 5. UV filter. The "reject" water flow from the RO filter has become very slow and the product water is salty in taste. It almost tastes like the raw input water to the RO System. I have changed two RO membranes in the last six months. The output pressure from the pump is absolutely fine and there are no issues with the Low Pressure Indicator and the transformer of the pump. Also I have changed the cartridges of inline sediment and pre carbon filter that are used before the RO filter recently. The flow through these filters are absolutely fine. The flow through the inline post carbon filter that is used after the RO filter is also fine. Is it possible that slow reject water flow might be caused because of the Flow Restrictor (FR) block? I have been using the same FR for the last 4 years ever since I purchased the RO system. Two questions: 1. Does a FR really get blocked? 2. And if it does, does it in any way damage the RO membrane? Kindly help. Thanks.
Hi.. we are using an industrial purpose RO plant but since it's commissioning we have faced when difficulties like low permeate flow over the period and ultimately high delta P across the RO. And many membranes have got damaged. frequent membrane failure and replacement is being done. we have done all types of cleaning but the problem persists. I know this information is very less but do you have any suggestions pls do tell. Thank you
Thanks, I had moved my tank to work on our washing machine and my tank lost pressure somehow. Zero pressure when I checked it, I didn’t think of no pressure but that was the problem. I pumped it to 8 pound and waters back.
Thank you so much! I'm a hero now lol... The bike pump worked but I'm not sure if was a pressure problem or if I unplugged something when I pumped.. I pumped once with the system detached and again with the system in line as a power flush
Hi, I have RO system but pentair TLC -Membrane 75 is not work properly. So it is very expensive always replace & install new membrane. So help me repairing method in my residents.
Hi, I have recently changed the sediment filter, pre carbon filter and RO membrane of my water purifier. The water seems to flow smoothly through all the stages but doesn't come out through the RO membrane stage. I've checked the RO membrane thoroughly and water only seems to be coming out of the reject side and not from the pure water outlet. What could be the problem? It's a brand new membrane and is pretty expensive :'(
im exactly where you are right now. I plan on buying a "auto shut off" piece. Its the one with 4 hoses meeting into it. Ive changed everything else. Pump is active and builds lots of pressure. Every hose is good. Bladder in tank is 8psi empty
my project is water purification by bicycle but pump are given to low pressure so membrane are no workable. please give idea to increase water pressure in pump.
i had barely any flow on the product side was told to chec k my membranes i did so and they seemed fine no buildup present but after i reinstalled thgem now the system acts like theyre not even there my nproduct pressure is off the guage !!! help what did i do i have a water store comercial system and its been down 4 days HELP PLKEASAE
Hi My RO system suddenly stopped producing water - doesn't fill the tank and the tap is dripping. Filters were changed just about month ago. What might be the problem?
I need help. I have been working on the whole system for weeks I have replaced all the filters (5stages) I just installed new tanks, and check valve. So that water going is is great! but after is goes through the three housing unit I check the water coming out and it is a WHOLE lot slower. We were having low water and running out quickly.Tanks aren't fill which is why I just changed the tanks. So should I give it more time.... Or did I get to strong of filters for the system? Thanks for help
I have a tankless system. It will only work until once then pump goes but no water comes out. At first I thought it was an air lock. Now I suspect pressure switch problems. It will stop when faucet is off but won't give flow after faucet is turned on again even tho I can hear pump going around...
***** i own a water business at southern california...and my water machine keeps on acting up...what is the proper name of a guy who fixes water machines like mine?
hi! I have replaced my ro membrane with csm 80 gpd one.after running the system product water rate is much higher than the waste.however TDs level is higher nearly 410. what I actually happening the reverse. I am confused whether I need to replace it . please help me. with regards sudipta
My water starts out strong but after about 15 seconds it slows and almost drips. my feed line is clear. so not sure, from this video, i may have low pressure in the tank. Anyone knows how long it takes for the pressure to begin to decrease in the tank?
In short: Replace the check valve (at the clean water connector) Hi mine is working for the last 8 years and suddenly having this slow/no flow problem, after I try replacing the filter, the ro membrane, the tank and finally found out that - that is because of the check valve or No-return valve problem. That valve is the elbow connector at the clean production water outlet. All three water connectors (one going in and two coming out of the RO membrane housing) look same but when you unscrew and take them out you will find the one at the clean water look different - you can google and buy one online. Damn, after I watch all these youtube videos telling me is the tank problem, the filter clogged... I even replace my tank. Finally, I bought a new RO housing and found out it is the check valve. I still using the old RO housing but just replace the check valve and now the water is finally flowing again, just in case the "flow restrictor" I bought that is attached to the wastewater-out seems usefull too.
I have a very low flow of water from our system. The pressure tank doesn't have any pressure at all (no water leaks) but I can't pump any air in. Completely blocked. Can only the valve be replaced (is it a special valve) or I have to replace entire storage tank. Could you please comment? AJT - South Africa
Hi, I am using Hi Tech reverse osmosis water system with booster pump. But i have doubt of pipe connection in all system. Can anybody guide me how to resolve this issue?
You were into the demo only a very short time and you solved my issue. i had over pressured the tank (tank said max pressure 100psi so I put it at 40) and it worked for awhile, and quit. Backing off the pressure to 7-8psi made it work, (I had replaced the filters). Thanks again.
My Kentwater filter not getting water, power has come but not getting water.
I have an RO System Water Purifier with 5 stage inline filters. 1. Sediment Filter, 2. Pre-Carbon filter, 3. RO-Membrane filter, 4. Post-Carbon filter and 5. UV filter.
The "reject" water flow from the RO filter has become very slow and the product water is salty in taste. It almost tastes like the raw input water to the RO System. I have changed two RO membranes in the last six months. The output pressure from the pump is absolutely fine and there are no issues with the Low Pressure Indicator and the transformer of the pump. Also I have changed the cartridges of inline sediment and pre carbon filter that are used before the RO filter recently. The flow through these filters are absolutely fine. The flow through the inline post carbon filter that is used after the RO filter is also fine.
Is it possible that slow reject water flow might be caused because of the Flow Restrictor (FR) block? I have been using the same FR for the last 4 years ever since I purchased the RO system. Two questions:
1. Does a FR really get blocked?
2. And if it does, does it in any way damage the RO membrane?
Kindly help. Thanks.
Hi.. we are using an industrial purpose RO plant but since it's commissioning we have faced when difficulties like low permeate flow over the period and ultimately high delta P across the RO. And many membranes have got damaged. frequent membrane failure and replacement is being done. we have done all types of cleaning but the problem persists. I know this information is very less but do you have any suggestions pls do tell. Thank you
Thanks,
I had moved my tank to work on our washing machine and my tank lost pressure somehow. Zero pressure when I checked it, I didn’t think of no pressure but that was the problem. I pumped it to 8 pound and waters back.
Water are coming very solwy what to do that 2:30 hours After fill 8L
Thank you so much! I'm a hero now lol... The bike pump worked but I'm not sure if was a pressure problem or if I unplugged something when I pumped.. I pumped once with the system detached and again with the system in line as a power flush
Anyone help: My RO System doesn't produce Waste/Drain Water! Is it normal?
Hi, I have RO system but pentair TLC -Membrane 75 is not work properly. So it is very expensive always replace & install new membrane. So help me repairing method in my residents.
Hi, I have recently changed the sediment filter, pre carbon filter and RO membrane of my water purifier. The water seems to flow smoothly through all the stages but doesn't come out through the RO membrane stage. I've checked the RO membrane thoroughly and water only seems to be coming out of the reject side and not from the pure water outlet. What could be the problem? It's a brand new membrane and is pretty expensive :'(
im exactly where you are right now. I plan on buying a "auto shut off" piece. Its the one with 4 hoses meeting into it. Ive changed everything else. Pump is active and builds lots of pressure. Every hose is good. Bladder in tank is 8psi empty
Did you find any solution
my project is water purification by bicycle but pump are given to low pressure so membrane are no workable. please give idea to increase water pressure in pump.
i had barely any flow on the product side was told to chec k my membranes i did so and they seemed fine no buildup present but after i reinstalled thgem now the system acts like theyre not even there my nproduct pressure is off the guage !!! help what did i do i have a water store comercial system and its been down 4 days HELP PLKEASAE
membrane give waist water but,pure water is not coming from second outlet valve,what I do
I'm also facing the same thing
Hi
My RO system suddenly stopped producing water - doesn't fill the tank and the tap is dripping. Filters were changed just about month ago. What might be the problem?
I am experiencing the same issue
Membrane is choked. Change membrane
I need help. I have been working on the whole system for weeks I have replaced all the filters (5stages) I just installed new tanks, and check valve. So that water going is is great! but after is goes through the three housing unit I check the water coming out and it is a WHOLE lot slower. We were having low water and running out quickly.Tanks aren't fill which is why I just changed the tanks. So should I give it more time.... Or did I get to strong of filters for the system? Thanks for help
Charity Ickes I'm having a similar issue! I hope someone can help you... and me!
Figured it out. One of the filters was defective (it was new) it was not allowing any water through the system. Working great now. Thanks
try clean or replace the Auto Shutoff Valve
I can't repressurize the tank. It won't accept the air.. what is the problem
I have a tankless system. It will only work until once then pump goes but no water comes out. At first I thought it was an air lock.
Now I suspect pressure switch problems. It will stop when faucet is off but won't give flow after faucet is turned on again even tho I can hear pump going around...
Same problem here. Did u figure this out?
hi.. i recently replaced outer filter but after dat water coming out very slow... vibration also have changed
Did you found a solution?
after I turn off the R O it will vibrate what can I do to get it to stop
***** i own a water business at southern california...and my water machine keeps on acting up...what is the proper name of a guy who fixes water machines like mine?
hi! I have replaced my ro membrane with csm 80 gpd one.after running the system product water rate is much higher than the waste.however TDs level is higher nearly 410. what I actually happening the reverse. I am confused whether I need to replace it . please help me.
with regards
sudipta
I have had exactly the same happen to me - TDs went even higher than 410
Great news!!
Multifiltro Sena
My water starts out strong but after about 15 seconds it slows and almost drips. my feed line is clear. so not sure, from this video, i may have low pressure in the tank. Anyone knows how long it takes for the pressure to begin to decrease in the tank?
In short: Replace the check valve (at the clean water connector)
Hi mine is working for the last 8 years and suddenly having this slow/no flow problem, after I try replacing the filter, the ro membrane, the tank and finally found out that - that is because of the check valve or No-return valve problem. That valve is the elbow connector at the clean production water outlet. All three water connectors (one going in and two coming out of the RO membrane housing) look same but when you unscrew and take them out you will find the one at the clean water look different - you can google and buy one online. Damn, after I watch all these youtube videos telling me is the tank problem, the filter clogged... I even replace my tank. Finally, I bought a new RO housing and found out it is the check valve. I still using the old RO housing but just replace the check valve and now the water is finally flowing again, just in case the "flow restrictor" I bought that is attached to the wastewater-out seems usefull too.
Siry ro aquagrand advanced west water not walking why
I have a very low flow of water from our system. The pressure tank doesn't have any pressure at all (no water leaks) but I can't pump any air in. Completely blocked. Can only the valve be replaced (is it a special valve) or I have to replace entire storage tank. Could you please comment? AJT - South Africa
*****
Thanks for the advice. I will replace the tank.
Reagards AJT
Water2buy Water Softeners
i have the ro pump pumping 10bar to the membrane but from yhe other side the water is very weak,the membrane is new ,what you think???
green light glows but there is no out put of water
Why is this system not under a sink?
Hi, I am using Hi Tech reverse osmosis water system with booster pump. But i have doubt of pipe connection in all system. Can anybody guide me how to resolve this issue?
Return pipe मधून पाणी येत नाही..Please help me.मोटर चालते
Good
جيد
You can make it yourself, just loook and learn from INPLIX .
2+and