Nice video, grips look great. A tip if you want to remove the grips without cutting them: Blow some compressed air into the grip and pull, they will come right off.
I’ll keep that in mind the next time I’ve got a compressor haha. Front porch wrenching makes things a bit difficult, especially when all of my tools are on another continent.
@@BurtoniMotors A quick spray of WD40 does the same. Push a flat screwdriver blade between the grip and bar, push the WD40 straw part way in, one quick spray, turn the grip and it (usually) comes off easily.
so if i want to remove my wheel I will need a sledge hammer and pound them out break them off of the rear housing? I mean why break something or make it non functional just to take something off lol.
@@BurtoniMotors I don't that's why I came to watch it but didn't know the were only going to cut it lol anyone could have gone that just chop it off come on lol.
@@dreamkiss4u What's the value in keeping the motorcycle grip it if I have no intention of using it ever again? Slice it and get it out of there so I can go on with my day.
@@BurtoniMotors what's the value on anything you don't have any intention of using again, ok let's just destroy everything and cause more waste in perfectly good working things, I rather give it away anything.... keep as backup anything. Besides if you look for easy way to get them off on UA-cam there's tons of ways that's even faster than cutting them off .... cutting them takes even longer
@@dreamkiss4u It was a garbage component that was not worth putting on another bike, giving away, or taking the time to preserve it. Sorry you are so upset about this.
Can’t believe I’m just now seeing about them..I can do some good work on a bike but have never changed grips..I have a 1” bar on a Bobbied Shadow..have any idea if I can use these? That gold would go good with my theme I just put on a gold RK chain
All good except: Cutting original grips. You could simply used alcohol / soapy solution to remove the grips; and clean that dirty handle bar on the throttle grip.
@@BurtoniMotors I've seen videos of Yamaha heated grips in Europe & when i tried to buy them from Yamaha here in Ohio at first he said, i can't find that part #.......then a few hrs later he texted back, i found the part but it needs a connecting cable & we can't get that & have no idea when we can get it....seems strange it's available in Europe but not in America,,,,
@@BurtoniMotors Are you sure mate? I see a yellow tube in your hand spreading glue onto the bar. Or does hairspray come in a squeeze tube these days that I'm not aware of? 😳. Nice grips though. Bit like Driven D3's by the looks of them.
There is no 'code'. You simply have no idea what you are doing. I'm not sure what is worse, your lack of knowledge or the sorry fools taking your advice.
You cut the old grips off and there was no adhesive at all yet they never failed. . Now for some reason you put adhesive on but those new grips have metal in them. You're never cutting them off again, bEuAuSe yUtUbe TurOriAls.
@@BurtoniMotors some of us have perfectly good grips that don't need changing and just need to remove them for other purposes, then put them back (to repaint the handlebar in my case).
This is pretty rich, considering you have a video on your channel of you chomping on a raw egg. At least this video benefits people. If I were you I'd find an outlet for your frustration elsewhere, instead of criticising peoples' choice in colour accents. I mean seriously, get a fucking hobby.
Nice video but you kinda stopped explaining what to do and speed up the footage at the most crucial part.
Nice video, grips look great. A tip if you want to remove the grips without cutting them: Blow some compressed air into the grip and pull, they will come right off.
I’ll keep that in mind the next time I’ve got a compressor haha. Front porch wrenching makes things a bit difficult, especially when all of my tools are on another continent.
@@BurtoniMotors A quick spray of WD40 does the same. Push a flat screwdriver blade between the grip and bar, push the WD40 straw part way in, one quick spray, turn the grip and it (usually) comes off easily.
@@BurtoniMotors or an air can duster
For the right grip can you just swap the grip itself and not the throttle stuff?
Only clicked cus I thought the grips looked dope.
Wouldn’t put them on my sport bike, but they’re sick dude.
Edit:Camera quality on point too
How do you take the metal gold one after u want to replace it? You can't use a knife to cut it like the rubber one...
Wd40 and a hairdryer/heatgun usually works
Video starts at 2:07. Wish people could just get to the point. with tutorials..
So sorry for that you did not like my free tutorial.
@@BurtoniMotors apology accepted
Nice grips and nice bike man!!!
Thank you!
What didi ypu put to slide the grip u didnt say is it cilicone
hair spray, old motocross trick. starts as a lubricant, dries as a glue.
Good video and easy to understand.Thanks!
Glad it helped!
Is there a specific glue u need?
Hello, what do u call that thing you apply before installing the handle grip?
Thast glue brother, UHU glue
Edit: I know im late, but better late then never
continue! man you are good :)
so if i want to remove my wheel I will need a sledge hammer and pound them out break them off of the rear housing? I mean why break something or make it non functional just to take something off lol.
If you know how to do this perfectly, why watch a video on it?
@@BurtoniMotors I don't that's why I came to watch it but didn't know the were only going to cut it lol anyone could have gone that just chop it off come on lol.
@@dreamkiss4u What's the value in keeping the motorcycle grip it if I have no intention of using it ever again? Slice it and get it out of there so I can go on with my day.
@@BurtoniMotors what's the value on anything you don't have any intention of using again, ok let's just destroy everything and cause more waste in perfectly good working things, I rather give it away anything.... keep as backup anything. Besides if you look for easy way to get them off on UA-cam there's tons of ways that's even faster than cutting them off .... cutting them takes even longer
@@dreamkiss4u It was a garbage component that was not worth putting on another bike, giving away, or taking the time to preserve it. Sorry you are so upset about this.
Would you know if this would fit a 2018 honda rebel cmx 500
Yep yep, motorcycle bars are almost completely universal. I would check your owner's manual to see what size your bars are fist, then go from there.
why glue??
is really needed?
Thank you so much!
why should the original part be damaged, when it can be saved and reused .🤔
most people replace the handgrips to not use the oem ones. Kinda pointless to replace them if you were going to put the old ones back on 🤔
Helped me alot thank you 👏👏
Glad to help!!
Throttle body throttle body throttle body
Can’t believe I’m just now seeing about them..I can do some good work on a bike but have never changed grips..I have a 1” bar on a Bobbied Shadow..have any idea if I can use these? That gold would go good with my theme I just put on a gold RK chain
Stupidly enough i was thinking can you use a bmx grip?
If you can find ones that fit your bars. The issue is finding one for the throttle tube.
How's the grip is it comfortable?
Was that glue or lube you put on the handle bar?
hairspray! it's like lube at first but then dries like glue
Hi if use the slightly Bigger one will it fit too as well? As it is like a fast throttle kit right.?
The right grip seems to be a little large for the handle?!
Do u need to put a dab of grease on the bar before putting the throttle?
A little hair spray is the ticket.
All good except: Cutting original grips. You could simply used alcohol / soapy solution to remove the grips; and clean that dirty handle bar on the throttle grip.
I was never going to put them back on the bike... or any bike so did not think it was bad.
Hi, I'm removing my originals now would you mind to explain how to remove them without damage. Thanks a lo
How you get in the States? There is a company whom sell them here?
I was still in Germany when I installed these grips. I don't believe they are available in the USA
@@BurtoniMotors I've seen videos of Yamaha heated grips in Europe & when i tried to buy them from Yamaha here in Ohio at first he said, i can't find that part #.......then a few hrs later he texted back, i found the part but it needs a connecting cable & we can't get that & have no idea when we can get it....seems strange it's available in Europe but not in America,,,,
Do you need to put Glue for the left one? or it'sup to you?
Glue or hairspray would work. Definitely put something on it.
@@BurtoniMotors What kinda Glue?
I love that rusty handlebar Don’t clean the first just put on your aftermarket JDM handgrips
😂😂😂😂😂
make sure you wipe down the throttle body too!
Dude you don't even tell us what glue you use??
I actually did, hair spray. You can choose whichever smell you like.
@@BurtoniMotors oh I'm sorry I missed that. Thanks for video
What kind of glue did U use ?
Good ole fashioned hairspray.
@@BurtoniMotors Are you sure mate? I see a yellow tube in your hand spreading glue onto the bar. Or does hairspray come in a squeeze tube these days that I'm not aware of? 😳. Nice grips though. Bit like Driven D3's by the looks of them.
Uhu glue
Thank you
Glad to be of help
Great video but i don't see a point for cutting old grips,they come off very easly
If you aren’t going to keep them, the easiest way to remove them is with a knife.
this grips is better sotck grips !? what a diference ?? sorry my ingles
Softer and thicker rubber. Less vibration. More substance to hold on to.
Nice video!
Btw, how did you do it on the trothle side with the big screw. I screw mine in but i blocks the trothle. :(
It was a lot of playing with it until it worked honestly. I tried a few ways of putting it all together until the last time when I cracked the code.
There is no 'code'. You simply have no idea what you are doing. I'm not sure what is worse, your lack of knowledge or the sorry fools taking your advice.
Thanks a million Oscar Dela Hoya👊
How can I get these in USA?
That's a great question, have you tried emailing them on their site? www.barracudamoto.com/ I'm sure they have a distributor stateside.
Wish I just got mine took 3 weeks
Yrah, thats not a throttle body. Nice video, but the false information is painful
Slip of the tongue - call it what you want.
Thx for vidéo, did de can add mirror with this grip ?
bro your nose is aerodynamics
what about the throttle ?
I'm not sure I understand your question? Sorry mate.
We need proper focus, not 4k!! :D
It’s hard to be on camera and the camera crew at the same time haha. When I make the big UA-cam bucks I’ll get a crew 👌🏻
@@BurtoniMotors Great, keep on! I liked ur video.
@@BurtoniMotors you can just ask some friends or family members to hold it for you brother.
Maybe you can turn off auto focus on these parts of the video :)
@@BurtoniMotors how good are those grips ? Are they good to help with the vibration? I’m looking for some good grips to help with the vibration
Dude, learn what a throttle body is. Different from the throttle tube.
Dude, why are you searching for this video if you know everything?
That is not a throttle body. A throttle body is a type of carburetor.
What did you put on the bar before you put the grip on?
I like how no one answered this
Hairspray
Hair spray is the quickest and easiest way to go plus inexpensive
Guys , don’t you get it, the grip was destroyed because “BARRACUDA “ says it. 🤪🙃
Did tou say 5/16 allen wrench on a japanese bike??? For god sake please use metric tools on that bike.
Quick and easy: makes a 12min long video
I'm sorry it's too long for you.
You cut the old grips off and there was no adhesive at all yet they never failed. . Now for some reason you put adhesive on but those new grips have metal in them. You're never cutting them off again, bEuAuSe yUtUbe TurOriAls.
Thanks for watching 👌🏻
@@BurtoniMotors where are you from bro?
This should be a tutorial on how to not put grips on your motorcycle why the fuck would you cut them
They were garbage grips that I was never going to use again.... why would I waste the time to save them?
Wire? It's a cable.
احسنت عمل جيد
cut = dislike. Show without cutting
what is the point of keeping a grip that has absolutely no value to me? It gets cut and I move on.
@@BurtoniMotors some of us have perfectly good grips that don't need changing and just need to remove them for other purposes, then put them back (to repaint the handlebar in my case).
Bro you talk too much just get straight to the point man !
2x that playback speed or skip forward?
Fake gold accents on a black bike.. Classy... I bet Have a velvet lion picture in your living room also
I’m sorry, I should of put real gold accents on my bike.
This is pretty rich, considering you have a video on your channel of you chomping on a raw egg. At least this video benefits people. If I were you I'd find an outlet for your frustration elsewhere, instead of criticising peoples' choice in colour accents. I mean seriously, get a fucking hobby.