You need to heat ( with a hairdryer for approximately 15 minutes maybe less ) the "bar ends" they're stuck with heat activated epoxy, after that you can unscrew it, just give it a little effort and it should work
I thought the same , I think he’s fucked them up,the bar ends I have wouldn’t go in far enough and you would have to cut some of the weight bar to allow the end bar to go right home or throw the weight away. It they are put there to stop. Vibration
I had taken my bike to a shop that i thought would do a good job on my bike for paint but as you can see he did a piss job plus kept my bike for 3months when he told me it would only take a week to get done, live & learn
barend sliders ? 99,99 / sure those are barend weights .. to lower vibrations also 100 % sure you had to redo the throttle :D .. ty for the video dude :) remember i`m not hating just stating :D
@@ACProductions77 the headlight is wired through the killswitch on a cbr f3. It kept on unsoldering. After the third time i tapped the switch hard and the red part on the switch snapped. It was still working but i figured it was best to replace since it might give me problems later on. I did it yesterday after 4 hours. I got multiple things done on the bike grips , killswitch, right clip on back to oem and windshield. Im mcloving it right now
that's why its called a tutorial cuz i explain the process. if you want to watch a video with no talking and cheesy music there is plenty of other videos to see that are not on my ch.
Yo!!!!💪 Your the BEST!!! JUST FINISHED DOING GRIPS!!!!! Holy hell you are not kidding throttle side was a B/tch!! Bike looks great. Awesome Videos
very helpful video, thank you
Great video thanks so much on making it go so easily
No problem glad I was able to help
You need to heat ( with a hairdryer for approximately 15 minutes maybe less ) the "bar ends" they're stuck with heat activated epoxy, after that you can unscrew it, just give it a little effort and it should work
You did not start the bike, and the sliders could be up against the rubber not allowing for the throttle to snap back.
its not sliders .. its barend weights to reduce vibrations
@@Ladosligese you don't use them like I do. Waka waka
You have shown a little bit of ingenuity great job #torah57mitch
I thought the same , I think he’s fucked them up,the bar ends I have wouldn’t go in far enough and you would have to cut some of the weight bar to allow the end bar to go right home or throw the weight away. It they are put there to stop. Vibration
Some overspray on your Yamaha badge
I had taken my bike to a shop that i thought would do a good job on my bike for paint but as you can see he did a piss job plus kept my bike for 3months when he told me it would only take a week to get done, live & learn
barend sliders ? 99,99 / sure those are barend weights .. to lower vibrations also 100 % sure you had to redo the throttle :D .. ty for the video dude :) remember i`m not hating just stating :D
I fucked the throttle cable grip :( i need to redo it but i also need to replace the kill switch.
how did you mess up the kill switch
@@ACProductions77 the headlight is wired through the killswitch on a cbr f3. It kept on unsoldering. After the third time i tapped the switch hard and the red part on the switch snapped. It was still working but i figured it was best to replace since it might give me problems later on. I did it yesterday after 4 hours. I got multiple things done on the bike grips , killswitch, right clip on back to oem and windshield. Im mcloving it right now
@@levylovits sweet ok , good job ! on it =)
Get to the point man jeezus. So much explanation for no reason. Just change the damn grips man!
that's why its called a tutorial cuz i explain the process. if you want to watch a video with no talking and cheesy music there is plenty of other videos to see that are not on my ch.
lol, the video is changing handgrips and you actually didnt show changing the handgrips.
you must of not watched the whole video because i do show removing and installing the grips