I just want to say that everything in my life is crumbling down. Then my mouse suddenly stopped working. I was ready to snap but I tried to fix it and I did. Thanks for making this video. At least I fixed something in my life.
A cheap solder kit lets you replace these switches easy. One of the best mice to mod without dealing with micro switch crap. The stock switches have a known issue to double click after a few months.
Omg FINALLY!! I've been searching for a detailed disassembly and reassembly video for a day and a half and your video is absolutely PERFECT! Thank you, thank you, thank you for this video!
Great video. Helped me a lot. I just want to add that if your scroll wheel is acting funny I recommend you to disassembly the scroll wheel and clean the little gaps on the side of the wheel. I had this problem and it's solved now.
Thank you very much! You really made a difference, as I was ready to buy new mouse in my anger. I thoroughly cleaned it up and it started working again..
Thank you for your video! My right click was unresponsive. Turned out there was a big bit of fluff under the right button! Mouse must be over five years old now and still going strong.
thank you very much. I was wondering why my middle mouse button wasn't working but after cleaning it, it's as good as new now I can use my mouse for many more years to come
thx for the video. Lo unico que le falta es el detalle de la rueda por si a alguno le pasa... la rueda va el lado plano del lado opuesto al alambre, y el alambre va por dentro de la rueda.
Missing the most important part which is the wheel. It's a grease catching machine. I could barely move mine unless it got warm from scrolling. Don't be afraid to take it out. The spring mechanism is hinged tight so just wiggle the wheel a little bit and it comes out. Clean it thoroughly and your wheel will be good as new.
The top panel for the left and right clicks of my g300s are a little bit wobbly after removing & cleaning it. Is there any way to stop it from moving so much?
Those optical photoelectric scroll thingy are so difficult to find 💀, saw this G300s for sale I wanted only the scrolly photoelectric thingy for my G402 is the 402 better than the 300s ?
aw man, I wish you show how to remove the mouse scroll wheel, I've fixed my mine that have a double click problem before by replacing the D2FC, and now the rubber on the scroll kinda melts XD I really need to replace those
I spent a lot of time on fiddling with scroll wheel, and I don't think it's replaceable. I believe the axis has plastic bearing hot pressed in place. I had issues with mine too (working very erratically or none at all), but it was piece of gunk and I believe eyelashes which blocked the sensor AND spokes. I very thoroughly cleaned the whole inside of the whell. Q-tips didn't work here, I finally used squished piece of paper towel soaked in IPA, which I held in tweezers. And lots, and lots of compressed air, to blow out dirt and alcohol.
Hey, nice video. I followed your guide to fix an issue with the Right Mouse Button, and that problem seems to be solved, but now I have another one. Having put the mouse back together I find that the scroll wheel is very unresponsive. For every 'tick' I scroll there seems to be a 1/6 chance the mouse actually does anything. Sometimes 12 ticks at a time and nothing happens. To compensate for this (somewhat) I turned up my scroll speed in windows settings, which kinda helps but now it just stops scrolling for a second and then scrolls a bunch at once, or some other spasmatic combination of actions. Any ideas what might be causing the issue or how I could fix it? Tyvm. Edit: It might just be stuff blocking the sensor. I reopened the mouse and there seem to be a fair few tiny hairs around the area where the scroll wheel/sensor are. I removed them to the best of my ability but some I wasn't able to get rid of. It seems to work a bit better, but the issue still generally persists. Maybe I'll just take some compressed air to it, any other ideas would be nice.
Eline sağlık kardeşim, güzel video. Keşke yatay çekseymişsin ama.
5 років тому
@@aanilgizem Ben fareyi geri taktım ama orta alt tuşu içeri hiç girmiyor ve sol-sağ tıklar tam basamıyor bir vidayı fazla veya gevşek mi sıktık acaba ne.
omg, since last year, my scroll wheel was not responding properly, but when I opened the mouse, I could see the dirt inside, when I removed everything and fixed the steel wire, it worked again like new
Hi. Has someone had the problem that your logitech g300s suddenly disconects for a second and then starts working again? It happens to me every 5 minutes specially while im gaming and it is so annoying.
Hi, this really worked for me. I had the issue of the scroll wheel doesn't working properly, it kinda make bumps in the motion but after cleaning it throughly it now scrolls like when it was new, it has 6 years now btw. The other issue I have and couldn't solve is that the scroll click doesn't work. I tried pressing it directly from the board without the black cover and it didn't work either, maybe some of you can help me with that. PD: I had to take the scroll wheel off to clean it properly until the little gaps were clear.
glad you renewed your mouse.. scroll click has a habit of working whenever it wants to on my mouse as well so idk how to fix it. maybe you can try to brush the switch on the motherboard from the sides..
Benim sol click biracık içeri girmiş gibi ben onu nasıl çözerim bilmiyorum sanki işaret parmağımd akas spazmı var gibi bastığım n algılmıyor sağ tıkta sıkıntı yok.... Deliricem...
Thank you my right button doesnt click sometimes, i need to click hard to make it work, when i opened it there was a lot of dirt, i cleaned it helped some but still doesnt work, any further advice? Thanks
My G300s keeps disconnecting while sliding. It happens at a specific angle of the wire bend near to the mouse body. Can I repair it? Do you have any suggestions or videos on it?
If washing doesn't fix the scroll wheel, blow compressed air through the tiny holes on the wheel. They're so tiny, look like texture. The oil they use on the wheel there slowly drops in the holes, filling them, which causes no light to be able to get across for the sensor to work. Blow the bugger out of its misery!
shoutout to logitech for creating a relatively expensive mouse which goes to shit in 1 year and users have to fix it themselves. while my 15 yr old laser mouse working just fine.
My left click is at fault. Whenever it click-and-hold and drag it, like when moving file, it automatically released. Is it possible to switch the left and right click omron switch?
This has happened to all my 300's. In my opinion it is some kind of design issue, they just don't hold up over time. I have three now... going to have to open one up and put new switches in.
Hey, my G300 keeps disconnecting when I move the mouse a certain way or the cable too far. I tried opening it and re-rolling it into place and it's still the same. Can you help?
kanka benim sağ tık basmıyor, bu üst kapağı açtım acaba oradan mı doğru tıklanmıyor diye ama soket üstünden kapaksız manuel tıklamaya çalıştım orada da sorun var. dolayısıyla üst kapağı temizlemeye gerek yok sorun sağ tıkın kendisinde diye düşündüm bunun için ne yapabilirim :(
Benim mouse normal tiklamada sorunu yok ama birseyleri kopyalamak icin basiri tutup sececegimde hep kendiliginden iptal ediyor ve oyunlarda basili tutmam gerektiginde basili tutmuyor ama normal tinlarken sorun yok herseyi tek tikta aciyor basili tutma fonksiyonu bozulmus acaba icine toz kir kactida o yuzdenmiki bu yöntemle acip temizlesem duzelirmi
Hello friend, I have a problem, my logitech g300s mouse crashes, already took in a technical assistance, the technicians told me that the mouse did not show defect, if you get it at first will find that everything is normal but after a while will notice the locks, have you had this problem?
I just want to say that everything in my life is crumbling down. Then my mouse suddenly stopped working. I was ready to snap but I tried to fix it and I did. Thanks for making this video. At least I fixed something in my life.
Thank you! This helped me out! I've had my mouse for over 3 years, and I was very surprised to see how clean it still was inside.
Somehow I ended up with 2 extra tiny screws, but my mouse has never been cleaner. Thank you!
A cheap solder kit lets you replace these switches easy. One of the best mice to mod without dealing with micro switch crap.
The stock switches have a known issue to double click after a few months.
Omg FINALLY!! I've been searching for a detailed disassembly and reassembly video for a day and a half and your video is absolutely PERFECT! Thank you, thank you, thank you for this video!
glad it helped you :)
Had to get a little creative when removing the scrool wheel, but everything else worked fine. Thanks for this video man, you saved me some cash!
Great video. Helped me a lot. I just want to add that if your scroll wheel is acting funny I recommend you to disassembly the scroll wheel and clean the little gaps on the side of the wheel. I had this problem and it's solved now.
Thank you very much! You really made a difference, as I was ready to buy new mouse in my anger. I thoroughly cleaned it up and it started working again..
Thank you and God bless you. My mouse wheel stopped scrolling properly, took it out, washed it, and it works again.
Thank you for your video! My right click was unresponsive. Turned out there was a big bit of fluff under the right button! Mouse must be over five years old now and still going strong.
thank you very much. I was wondering why my middle mouse button wasn't working but after cleaning it, it's as good as new
now I can use my mouse for many more years to come
Clearly explains how to take off each component(I didn't take off the scroll wheel, cleaned along with that).
Good tutorial.
thanks for your comment :)
Nice video, will be very useful whenever I need to clean my mouse.
Thanks; I fixed a clicking problem with my mouse with the help of your video.
which screw driver u used ???
@@yash_iz I don't quite remember but I think it was a precision screwdriver from a set
thank you for this Disassemble video :)
Thanks really helpful vid sucks that my mouse was still having issues tho
Thanks for the video man
It worked but a shame that the button was getting unresponsive
Atleast now i know what need to be replaced
Very useful video. Thanks a lot.
Fantastic, thank you!!
Güzel paylaşım çok yardımcı oldu sökme takma sırasında, teşekkürler.
thx for the video. Lo unico que le falta es el detalle de la rueda por si a alguno le pasa... la rueda va el lado plano del lado opuesto al alambre, y el alambre va por dentro de la rueda.
Thank you very much ！！！
I know how to clean now！！！
Missing the most important part which is the wheel. It's a grease catching machine. I could barely move mine unless it got warm from scrolling.
Don't be afraid to take it out. The spring mechanism is hinged tight so just wiggle the wheel a little bit and it comes out. Clean it thoroughly and your wheel will be good as new.
The top panel for the left and right clicks of my g300s are a little bit wobbly after removing & cleaning it. Is there any way to stop it from moving so much?
Hey man, thank you!
My right button was not working. Now after cleaning it works fine!
God bless you !
@@aanilgizem Before cleaning i had to click multiple times to actually work. Now it's back in function in each click =)
Those optical photoelectric scroll thingy are so difficult to find 💀, saw this G300s for sale I wanted only the scrolly photoelectric thingy for my G402 is the 402 better than the 300s ?
muy bueno, me ayudo mucho con mi mouse 10 de 10
Thank you, dude. :^)
Can the wired be removed and reattached safely without damage to the ports?
thanks bro :)
aw man, I wish you show how to remove the mouse scroll wheel, I've fixed my mine that have a double click problem before by replacing the D2FC, and now the rubber on the scroll kinda melts XD
I really need to replace those
I spent a lot of time on fiddling with scroll wheel, and I don't think it's replaceable. I believe the axis has plastic bearing hot pressed in place. I had issues with mine too (working very erratically or none at all), but it was piece of gunk and I believe eyelashes which blocked the sensor AND spokes. I very thoroughly cleaned the whole inside of the whell. Q-tips didn't work here, I finally used squished piece of paper towel soaked in IPA, which I held in tweezers. And lots, and lots of compressed air, to blow out dirt and alcohol.
Is there any way i van get the rainbow script? Good vid!
Pretty useful, but one criticism, you went out of frame for some of the disassembly. Bit difficult to emulate what we can't see.
Hey, nice video. I followed your guide to fix an issue with the Right Mouse Button, and that problem seems to be solved, but now I have another one.
Having put the mouse back together I find that the scroll wheel is very unresponsive. For every 'tick' I scroll there seems to be a 1/6 chance the mouse actually does anything. Sometimes 12 ticks at a time and nothing happens. To compensate for this (somewhat) I turned up my scroll speed in windows settings, which kinda helps but now it just stops scrolling for a second and then scrolls a bunch at once, or some other spasmatic combination of actions.
Any ideas what might be causing the issue or how I could fix it? Tyvm.
Edit: It might just be stuff blocking the sensor. I reopened the mouse and there seem to be a fair few tiny hairs around the area where the scroll wheel/sensor are. I removed them to the best of my ability but some I wasn't able to get rid of. It seems to work a bit better, but the issue still generally persists. Maybe I'll just take some compressed air to it, any other ideas would be nice.
my mouse is very whorse now. i need to clean it like yours. ty
i need to press my g300s middle mouse buttom too hard....is there any solution?
i didnt see any spring? why my g300s got a spring and i dnt know where to put it/
@Aslan 23 are you still using this mouse?
Eline sağlık kardeşim, güzel video. Keşke yatay çekseymişsin ama.
@@aanilgizem Ben fareyi geri taktım ama orta alt tuşu içeri hiç girmiyor ve sol-sağ tıklar tam basamıyor bir vidayı fazla veya gevşek mi sıktık acaba ne.
i need help my mouse light keeps truning on and off with no problems with the conectios or any thing pls i need to fix it
omg, since last year, my scroll wheel was not responding properly, but when I opened the mouse, I could see the dirt inside, when I removed everything and fixed the steel wire, it worked again like new
👍👍👍
thx
Hi. Has someone had the problem that your logitech g300s suddenly disconects for a second and then starts working again? It happens to me every 5 minutes specially while im gaming and it is so annoying.
Hi, this really worked for me. I had the issue of the scroll wheel doesn't working properly, it kinda make bumps in the motion but after cleaning it throughly it now scrolls like when it was new, it has 6 years now btw.
The other issue I have and couldn't solve is that the scroll click doesn't work. I tried pressing it directly from the board without the black cover and it didn't work either, maybe some of you can help me with that.
PD: I had to take the scroll wheel off to clean it properly until the little gaps were clear.
glad you renewed your mouse..
scroll click has a habit of working whenever it wants to on my mouse as well so idk how to fix it. maybe you can try to brush the switch on the motherboard from the sides..
@@aanilgizem yeah, it works randomly, thank you
Benim sol click biracık içeri girmiş gibi ben onu nasıl çözerim bilmiyorum sanki işaret parmağımd akas spazmı var gibi bastığım n algılmıyor sağ tıkta sıkıntı yok.... Deliricem...
Why this video stop on first 3 seconds
Thank you my right button doesnt click sometimes, i need to click hard to make it work, when i opened it there was a lot of dirt, i cleaned it helped some but still doesnt work, any further advice? Thanks
switchleri bozuluyor lehim ve lehim pompası kullanarak yandaki diger tuslardan biri ile sorun yasadigin switchi degistirmen lazim
My G300s keeps disconnecting while sliding. It happens at a specific angle of the wire bend near to the mouse body. Can I repair it? Do you have any suggestions or videos on it?
ı have a problem too if u found video can u share for me
Same here, Logitech support send a new one, but after 10 month the new mouse also keeps disconnecting... Nothing can't fix this.
4:51 reassemble
If washing doesn't fix the scroll wheel, blow compressed air through the tiny holes on the wheel. They're so tiny, look like texture. The oil they use on the wheel there slowly drops in the holes, filling them, which causes no light to be able to get across for the sensor to work. Blow the bugger out of its misery!
shoutout to logitech for creating a relatively expensive mouse which goes to shit in 1 year and users have to fix it themselves. while my 15 yr old laser mouse working just fine.
Which screw driver do you used? recommend one please
try the straight one or the star headed one
nice music choice what's the name, do you know?
muse all the way
Piano intensifies
you disassembled it wrong, to remove the top cover you have to disassemble the bottom part first.
otherwise, you can break the cover latches.
Mine has a hold click problem on the right click when i try to turn in any game the thing kinda fails until you press hard any fix?
Me too! I'm currently looking to open it and fix the metal thingy inside, PCGamingWiki has a video on opening a mouse.
Ayron Cajuday have you fixed it?
@@drizzterenkoy no
@@drizzterenkoy I haven't yet
Dostum eline saglik fakat bende o usteki seyi taktim habire haraket ediyor mesela sol clicke basiyim diyorum haraket ediyor ister istemez rahatsiz edici
nasil duzeltebilirim
My left click is at fault. Whenever it click-and-hold and drag it, like when moving file, it automatically released. Is it possible to switch the left and right click omron switch?
yes its possible in mouse settings/pc
You can replace the switch actually. You can find it in Aliexpress
same problem happens with me, but I thought cleaning could solve it so did you try cleaning it first ? .. anyone has an advice ?
This has happened to all my 300's. In my opinion it is some kind of design issue, they just don't hold up over time. I have three now... going to have to open one up and put new switches in.
Hey, my G300 keeps disconnecting when I move the mouse a certain way or the cable too far. I tried opening it and re-rolling it into place and it's still the same. Can you help?
@@aanilgizem thanks for the quick reply, i dont think the issue is with the board but the cable extending too far
same here ! i have two g300s and it they keep disconnecting for no reason, a lot of people have this issue
@kash same thing is happening with my mouse from a few days, did you find the solution?
kanka benim sağ tık basmıyor, bu üst kapağı açtım acaba oradan mı doğru tıklanmıyor diye ama soket üstünden kapaksız manuel tıklamaya çalıştım orada da sorun var. dolayısıyla üst kapağı temizlemeye gerek yok sorun sağ tıkın kendisinde diye düşündüm bunun için ne yapabilirim :(
switchi değiştircen eski bi mousetan falan çıkar buna tak düzelir
Benim mouse normal tiklamada sorunu yok ama birseyleri kopyalamak icin basiri tutup sececegimde hep kendiliginden iptal ediyor ve oyunlarda basili tutmam gerektiginde basili tutmuyor ama normal tinlarken sorun yok herseyi tek tikta aciyor basili tutma fonksiyonu bozulmus acaba icine toz kir kactida o yuzdenmiki bu yöntemle acip temizlesem duzelirmi
Tekerleği çıkarmak isterken kırıldı :D Adi logitech.
Bu kadar küçük vida için tornavida nereden bulabilirim
iyi bir nalburdan bulursun set olarak satılıyor genelde bunlar. bendeki 20 yıllık tornavida nereden alındığını bilemiyorum o yüzden..
Tried to do this. Step one take of the rubbers ... they tore irrepairably. FML
Dostum orta tuşum çok yapışkan yuvarlak olan tuş, nasıl değiştirebilirim acaba yardımcı olur musun lütfen.
Hello friend, I have a problem, my logitech g300s mouse crashes, already took in a technical assistance, the technicians told me that the mouse did not show defect, if you get it at first will find that everything is normal but after a while will notice the locks, have you had this problem?
knk bende sağ tık çalışmıyor ne yapayim
gec oldu ama sag tikin switchini yandaki tuslardan biriyle degistirmen lazim biraz zor bir islem
Those screws are so small I cant find a proper screwdriver
try a knife.
OLUM SENİN HEYKELİN YAPILSA ÜLKEDE BETON KALMAZ BE ADAMSIN LAN VİRÜS VAR MOUSE SAĞ TIK BOZULDU TAK ÇIKAR YAPTIM DÜZELDİ LAN ADAMSIN YA ADAM ADAMMMM