Very thorough and exactly what I needed to see and hear. Admittedly, I'll be going with a new fuel pump, mounted just where you'd suggested. Thank you for uploading this and making my life a heck of alot easier. Also, I'm definitely using the blue tubing. That should give me an extra 10 HP. 😅
See my latest on this. My stock filter was plugged. I added an electric pump, but had to drop it down low. ps I haven't had it on the dyno yet, but I bet your HP guess is accurate. Almost does wheelies now. Lol
@mikedesilets3324 Indeed! 😅 I've been keeping up with your videos as I am in the exact same spot as you are with this. For what it's worth, I went to an autoparts store and found, next to the filters, the very fuel pump for that machine. Swapped out the pump and filter and she fired right up. The true test comes when there is a load on the hydraulics. Fingers crossed.
Hello Mike. I had my skid under some heavy hydraulic pressure today using my auger and planing a stump. The engine stalled eight times and struggled to start back up. I'm going to start with replacing the inline fuel filters. Where did you get yours? Any part numbers you can share? Thank you.
@bruce9251 I added the pump link. If you can find a lower psi range, it might be better/safer. I haven't had any issues though. Filters were just from a local autoparts store, based on hose size.
@@mikedesilets3324 Hello Mike. I don't see the pump link. Did you attach it? I saw your other pump videos. What lower psi range do you suggest? Thanks.
@@bruce9251 The link is at the very end of the reply containing a pump description. You have to click on the reply. I would think that a 1-2 psi pump would do, but I didn't find one.
That is called an impulse pump, and it should have no issues in that application. They power 25hp engines all day. It may be a junk pump... but it is the correct pump for the application. They are standard Lego parts. Buy a known quality pump from Kohler, Briggs and Stratton, Kawasaki. Basically go buy a quality pump from the OEM that these guys are ripping off. Theory of operation. It contains a diaphragm. One side connects to the crank case. Every time the piston moves in the bore it creates a pressure differential in the crank case. That causes the diaphragm to move in or out. The other side of the diaphragm contains the fuel, and two check valves. So it can only draw fuel from the tank, and only push fuel to the carburetor. 1:45 Not the best idea. There is good reason why nobody intentionally loops a fuel line like that. It encourages the entrained vapors to come out of suspension. Then you have a vapor lock condition. Nothing on that engine is SAE. Metric fuel line, and constant tension clamps are far superior to incorrectly sized lines and ill fitting worm gear clamps.
@@busterb.bottoms.1418 If the stock mechanical or vacuum pumps are inadequate or often fail, what's the issue with an electric pump? Granted, mine could possibly have only been a plugged filter.
@@mikedesilets3324 Electric fuel pumps will continue to pump even when engine dies or a line is cut or split , possibly spraying fuel into the hot area of the engine compartment. Also some could buy electric fuel pumps with radically too high fuel pressure. Vacuum pumps only pump if the engine is running. Also not necessary as proven by the millions of these types of engines using the inherently safer vaccum diaphragm pumpers.
@busterb.bottoms.1418 True, there are potential (use at your own risk) dangers. Anyone making any mods should be aware of that. I'm guessing that these engines were probably designed to have the fuel tanks somewhere other than under the engine? If so, that might be what's causing the performance issues. Any ideas on that?
@@mikedesilets3324 I have a similar skidsteer machine and do not have problems with diaphragm pumper. I have run those on 25hp 2 stroke kart engines that are fuel heavy motors without problems. Maybe it is a "chinese" quality problem , maybe the diaphragm is dry/ weak/ or stiff.
@busterb.bottoms.1418 Thanks for your input. I hope others read it and understand the dangers. I did read where someone ran the pump power (for a race car) off of the oil pressure switch. They used a momentary power switch to start the pump. Oil pressure then keeps power on. When engine dies, pump turns off.
Very thorough and exactly what I needed to see and hear. Admittedly, I'll be going with a new fuel pump, mounted just where you'd suggested. Thank you for uploading this and making my life a heck of alot easier. Also, I'm definitely using the blue tubing. That should give me an extra 10 HP. 😅
See my latest on this. My stock filter was plugged. I added an electric pump, but had to drop it down low.
ps I haven't had it on the dyno yet, but I bet your HP guess is accurate. Almost does wheelies now. Lol
@mikedesilets3324 Indeed! 😅 I've been keeping up with your videos as I am in the exact same spot as you are with this. For what it's worth, I went to an autoparts store and found, next to the filters, the very fuel pump for that machine. Swapped out the pump and filter and she fired right up. The true test comes when there is a load on the hydraulics. Fingers crossed.
@@franklinshooter3050 I have a feeling that my stock pump is fine. I may do a hose swap (without the stock filter) to test it. I'm curious now.
electric fuel pump should always be mounted below the fuel line in the tank for max life span.
Hello Mike. I had my skid under some heavy hydraulic pressure today using my auger and planing a stump. The engine stalled eight times and struggled to start back up. I'm going to start with replacing the inline fuel filters. Where did you get yours? Any part numbers you can share? Thank you.
@@bruce9251 Electric Fuel Pump 12v Electric Transfer Universal Low Pressure Gas Diesel Fuel Pump 2.5-4psi HEP-02A a.co/d/aAE3hlB
@bruce9251 I added the pump link. If you can find a lower psi range, it might be better/safer. I haven't had any issues though. Filters were just from a local autoparts store, based on hose size.
@@mikedesilets3324 Hello Mike. I don't see the pump link. Did you attach it? I saw your other pump videos. What lower psi range do you suggest? Thanks.
@@bruce9251 The link is at the very end of the reply containing a pump description. You have to click on the reply.
I would think that a 1-2 psi pump would do, but I didn't find one.
@@mikedesilets3324 Thank you Mike!
Could be only the fuel cap should suck air through the cap to flow petrol through the pump loose the petrol cap a little bit and try
That is called an impulse pump, and it should have no issues in that application. They power 25hp engines all day. It may be a junk pump... but it is the correct pump for the application. They are standard Lego parts. Buy a known quality pump from Kohler, Briggs and Stratton, Kawasaki. Basically go buy a quality pump from the OEM that these guys are ripping off.
Theory of operation.
It contains a diaphragm. One side connects to the crank case. Every time the piston moves in the bore it creates a pressure differential in the crank case. That causes the diaphragm to move in or out. The other side of the diaphragm contains the fuel, and two check valves. So it can only draw fuel from the tank, and only push fuel to the carburetor.
1:45 Not the best idea. There is good reason why nobody intentionally loops a fuel line like that. It encourages the entrained vapors to come out of suspension. Then you have a vapor lock condition. Nothing on that engine is SAE. Metric fuel line, and constant tension clamps are far superior to incorrectly sized lines and ill fitting worm gear clamps.
@Failure_Is_An_Option Thanks for the detailed info. At this point I'm pretty sure the stock fuel filter was the issue.
@@mikedesilets3324 Wouldn't surprise me either. The components they figure out how shave costs on is amazing.
I've seen and read many replacing this with with an electric pump. Please stop doing this it's silly and dangerous.
@@busterb.bottoms.1418 If the stock mechanical or vacuum pumps are inadequate or often fail, what's the issue with an electric pump? Granted, mine could possibly have only been a plugged filter.
@@mikedesilets3324 Electric fuel pumps will continue to pump even when engine dies or a line is cut or split , possibly spraying fuel into the hot area of the engine compartment. Also some could buy electric fuel pumps with radically too high fuel pressure. Vacuum pumps only pump if the engine is running. Also not necessary as proven by the millions of these types of engines using the inherently safer vaccum diaphragm pumpers.
@busterb.bottoms.1418 True, there are potential (use at your own risk) dangers. Anyone making any mods should be aware of that. I'm guessing that these engines were probably designed to have the fuel tanks somewhere other than under the engine? If so, that might be what's causing the performance issues. Any ideas on that?
@@mikedesilets3324 I have a similar skidsteer machine and do not have problems with diaphragm pumper. I have run those on 25hp 2 stroke kart engines that are fuel heavy motors without problems.
Maybe it is a "chinese" quality problem , maybe the diaphragm is dry/ weak/ or stiff.
@busterb.bottoms.1418 Thanks for your input. I hope others read it and understand the dangers.
I did read where someone ran the pump power (for a race car) off of the oil pressure switch. They used a momentary power switch to start the pump. Oil pressure then keeps power on. When engine dies, pump turns off.