🇬🇧CityBug Peugeot 107 Exhaust Rear Backbox Dropped Off, How To Replace.
Вставка
- Опубліковано 7 вер 2024
- The 107 Pulled Up Sounding Like A Tractor, With The Exhaust Hanging Off,
A Nice Easy Repair To Fit A New BackBox
The System had corroded which is common on these city bugs.
Link to the exhaust Repair Bracket amzn.to/3oSuVyD
Link to new back box amzn.to/3qmlFTu
Link to exhaust rubber amzn.to/3p485Ep
Link to exhaust clamp amzn.to/35NRi0r
Link to all tools and parts in the video www.amazon.co....
Just did mine. Parked the car half on the kerb so I could get under it. Took 40mins because of rusty bolts. So easy. Love this car.
Great work well done, Thanks for the great comments👍🏻👍🏻🛠
Corrosion on Exhaust was an advisory on my MOT. It fell off before I repaired it . Bought a new bracket and passed next MOT without any advisory. Simple job and easy for a simpleton like me. Always good to inspect the rubber mountings, as these can be replaced at the same time.
Thanks for sharing & Thanks Richard for the great comments👍🏻👍🏻🛠
I have a twin stainless steel custom exhaust on my Peugeot 107. It came with the car. I've just bought a standard exhaust as going to sell the custom one. It pops and bangs etc. Just way too loud for my liking. This video is great as clearly shows the job being done and informative also. Thank you.
Thanks for the great information👍🏻👍🏻🛠
Much obliged for the Vid. The pipe coming from my engine had detached at the muffler on my Aygo. This vid just saved me £110!! I managed to get a local parts shop to get me a new silencer for £49 delivered within 2 hours. Kwikfit quoted me £157 to replace it. Needless to say after watching this I did it myself. Many thanks.
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
Thanks love how easy and cheap is to work on them small cars
Yes they are! Thanks for the great comments👍🏻👍🏻🛠
Great video thanks, my son owns one of these and is learning to drive and the rear hanger has come loose off the weld . I see there's a repair bracket and I was originally going to opt for that , but after watching this, I've gone for the complete back box and I'm going to give him his first lesson on maintaining his car . It's also due a mot in January , so for the sake of £40 it's a no brainer. Thanks again for posting this.
Glad it helped, Thanks for the great comments👍🏻👍🏻🛠
Good to see its a straight forward easy job, I see online there is also a gasket that goes into the joint I think before the clamp goes on.
No gasket on the back box, there is one on the down pipe Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 thanks for reply have you ever done the entire exhaust, is the catalyst side difficult with the spring loaded bolts?
3:24 thank you for this mine broke earlier when driving down the motorway.
Thanks for the great comments👍🏻👍🏻🛠
I replaced the back box on my Aygo but I didn't angle the bracket so it used to hit the bottom of the car. it made a terrible noise.
Thanks for the video.
Yes if you don’t angle the larger bracket there is a chance over time it will rub through the fuel tank !! Thanks for the great comments👍🏻👍🏻🛠
Thanks Anton, pretty good video. As simple as the car and it's repair and service. I clicked on the link to the exhaust clamp. This cheap thing is "German Engineering"! Wow, I'm impressed! 🔥😃🔥
Thanks Martin for the great information👍🏻👍🏻🛠
Thank you so much, your videos have helped me many times!
Happy to hear that! Thanks for the great comments👍🏻👍🏻🛠
That new exhaust sounds like a helicopter awesome 😋 my daughter has a 5door c1 it went in for a recall the other day to have the rear windows re bonded (5 doors only) as the glass can fall out when the hinges become unstuck 😱
wow, don't want the glass to fall out, Thanks for the great comments👍🏻👍🏻🛠
Its nice that PSA actually take the hit on this fix.
Fantastic video once again. One for my UA-cam archive list.
Glad you enjoyed it, Thanks for the great comments👍🏻👍🏻🛠
That's so cool, My 107 has just had this happen. I popped into Kwik fit & they said it's the exhaust bracket gone. Recommended a welder because Kwik fit would just replace the back box if they did it, but the local welder said it'll likely be cheaper to just get the back box, but I would be way out my depth & don't have a jack etc. But it was interesting watching you fix it! I shall try find a place cheaper than Kwik fit anyway.
It’s an easy fix all the parts are listed in the video description Thanks for the great comments👍🏻👍🏻🛠
Super useful. Great job 👏🏼
Thanks for the great comments👍🏻👍🏻🛠
When I fit cheap back boxes I always spray BBQ paint on all the welded bits. This seems to make them last longer.
Don't really know why the manufacturer's don't do it in the factory.
Is that the BBQ stove anti-rust spray paint?
@@underdogunchained The one I have is a Wilko brand can. Had it years. But any BBQ/stove paint will do.
It wont stop it (as you can see they have a little rust from new) but it it extends the life by a year then it's money well spent.
great idea, keep that bracket from rotting from the outside, Thanks for the great comments👍🏻👍🏻🛠
prefect time mine just broke thanks for the upload.
Thanks for the great comments👍🏻👍🏻🛠
Give the wee thing a shot of acf 50 , it will stop that surface rust for a couple of years , then just spray it again ,, great stuff and it even smells nice.
Thanks for the great information👍🏻👍🏻🛠
Great video thanks! You dont seem to need to on this video, but any tips on seperating the through pipe and the end can pipe (the bit beneath the clamp)?
Trying to seperate the rusted through end can but cannot get those bits apart. Have tried WD40 and even some heat but it's so stuck.
Thanks!
They can corrode and fuse together, if you can get it cherry red with heat it will separate if twisted, Thanks for the great comments👍🏻👍🏻🛠
It would be great if you did a short video on where the axle stand points are on the front & rear for the Aygo as I see a lot of confusing information on this.
anywhere on the main subframe is fine, but yes I will do another video, Thanks for the great comments👍🏻👍🏻🛠
Nice video,, and I like those rims.
Here is the video on them ua-cam.com/video/IjdEhu_2j3w/v-deo.html Thanks for the great comments👍🏻👍🏻🛠
Haha didn't realise the fucking bracket corroding and falling off was common. I drove an hour to Lydd for some gokarting and then went to drive off afterwards (everything was fine) and my exhaust just dropped. Had to cable tie it temporarily until I got my replacement backbox
nice easy job, Thanks for the great comments👍🏻👍🏻🛠
Did this exact job a few months ago!
Seems really common this time of year, should be good for a while now Thanks for the great comments👍🏻👍🏻🛠
Sweat as a nut mate good camera footage 👌
Thanks Norm, that osmo pocket does like the bucks and crannies, Thanks for the great comments👍🏻👍🏻🛠
Thanks Norm, that osmo pocket does like the bucks and crannies, Thanks for the great comments👍🏻👍🏻🛠
Where did you get that trolley jack from? That's genius design!
Its made by major lift, they are hard to come by, Thanks for the great comments👍🏻👍🏻🛠
Useful video, thanks 👍
Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠
Trying to get mine off at the joint, it’s so rusted it won’t come off, even worse i had to cut the clamp off at the bolt was far too tight to undo
Soaked the joint with WD40 hopefully some progress tomorrow
you can do it, give it a bash! Thanks for the great comments👍🏻👍🏻🛠
Hi my exhaust was blowing around the join I noticed the clamp wasn't on properly. Should it cover both half's of the exhaust. Was wondering if my clamp wasn't wide enough
It wont go all around it just pulls the 2 sections together, might be worth separating and cleaning might be corroded, Thanks for the great comments👍🏻👍🏻🛠
Definitely need to find a long term stainless steel solution for this, the corrosion on these exhausts is too frequent, I'm looking for my 3rd one now and although they are cheap and easy to fit, I can see them rotting again within a year or two max. Is it possible to get a stainless solution that is just as quiet as the original without it sounding boy racer??
yes you can a good exhaust company will make you one for around £300, Thanks for the great comments👍🏻👍🏻🛠
I think this may have happened to my car and I’m meant to be driving an 1hrs journey tomorrow, do you think its safe to drive with before i can fix it?? great video btw, very helpful!!
Depends if the exhaust is completely rotted, it shouldn't fall off but it will be noisy Thanks for the great comments👍🏻👍🏻🛠
Legend, thank you 😊
Happy to help Thanks for the great comments👍🏻👍🏻🛠
Grazie
Thanks for the great comments👍🏻👍🏻🛠
good
Thanks for the great comments👍🏻👍🏻🛠
Can't get over how tiny the exhaust is on the Aygo/107/C1. I've seen thicker drinking straws 🤣
😂😂Thanks for the great comments👍🏻👍🏻🛠
Evening Fella.
Great information contained within a fantastic video as always.
Great to c u back spannering 🔧🔧🔧🔧🔧🔧
I do like the videos on the DINKY TOYS.
Glad to see you've ad a rest from recreating the "DODGY 1970'S FILM" set wiv ya new lights 🙊🙊🙊🙊🙊🙊🙊
I'm liking the subtle reference to your Son in his number plate.
Stay safe. Stay healthy.
Alan L200
watched the live back, the yellow lights played havoc with the stream cam will have to watch out for that in future, Thanks Alan for the great comments👍🏻👍🏻🛠
Hi thanks for video any idea where I find the replacement bracket as I’ve looked online including eBay and can’t find it cheers
Link to the exhaust Repair Bracket amzn.to/3oSuVyD
Link to new back box amzn.to/3qmlFTu
Link to exhaust rubber amzn.to/3p485Ep
Link to exhaust clamp amzn.to/35NRi0r
Thanks for the great comments👍🏻👍🏻🛠
Easier than I thought
Thanks for the great comments👍🏻👍🏻🛠
Last month Jane Fonda set the internet ablaze with her Harper’s Bazaar cover in a sequined body-con Ralph Lauren dress, Dolly Parton inspired a cold-shoulder fashion trend with her vaccination video, and Joan Collins’s Instagram has been instructional on how to do lockdown in fabulous style.
The latest “granfluencers” are Marie-Louise and René Glémarec, 86 and 87 respectively, who went viral after appearing at the last physical Paris fashion week dressed in the punk-inspired, gender-neutral clothes made by their grandson Florentin Glémarec for his label EGONlab, which he runs with partner Kévin Nompeix.
Thanks for the great information👍🏻👍🏻🛠
Great stuff pal, Do you have a link for that trolly Jack. I couldn't see it on your Amazon store. Looks like a handy piece of kit. 👍
It is made by major lift, they are not available to buy, but if I was to purchase a new jack I would go for something like this amzn.to/3imQx3H, cheaper and better quality than the one I have Thanks for the great comments👍🏻👍🏻🛠
Thanks
Thanks for the great comments👍🏻👍🏻🛠
Just had rear box fitted seems loud when car is ticking over
some of the after market exhausts sound different from the original ones, Thanks for the great comments👍🏻👍🏻🛠
interesting they uses a socket join rather than the tube inside tube which always made back box replacement a horrid job, i have a mk2 aygo and always looing to learn more from people doing stuff to theirs
this type of joint is so much easier to separate make light work for the repair, Thanks for the great comments👍🏻👍🏻🛠
Thanks 😊
Thanks for the great comments👍🏻👍🏻🛠
can`t split the rear and front sections. It`s absolutely solid. Help.
if you have a plumbers gas blow torch or a electric paint stripper heat gun get it as hot as possible, and tap apart or use big grips, links are blow torch amzn.to/2WcBkM3 and heat gun amzn.to/3ziCZOg
big grips amzn.to/2XM6pGx Thanks for the great comments👍🏻👍🏻🛠
Cheers mate!
Any time! Thanks for the great comments👍🏻👍🏻🛠
Great video. My experience was less straightforward and haven't been able to fit the new back box yet. My clamp was really really corroded. Used loads of WD40. It took hours to get off. A 13mm socket and ratchet should have got the thing off. I had to drill the bolt out in the end. (The clamp on mine was a one-piece and only has one bolt through it.) I put a block of wood behind and taped an old sponge to the back of the clamp to hold it in one place in order to drill it out. I'm struggling to get the new pipe to slide onto the existing one, it seems a tight fit. Possibly because the old one is quite rusty. I'm thinking I might spray a bit more WD40 on the old pipe and maybe use a bit of sandpaper on it to clean it up a bit more. Have you got any other tips or suggestions for sliding the new pipe onto the old one? If you have any suggestions, they would be much appreciated.
I wire brush in the drill, or a round file will make the job easier, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Great. Thanks for the tips. I'll give that a try.
good job
Thanks for the great comments👍🏻👍🏻🛠
Will the Tailpipe Hanger Exhaust Repair Clamp (48mm) work for the front part of the exhaust,that's perished and causing the exhaust to hang down.
if the front bit is hanging low I would think it needs replacing its not too hard I show it in this video ua-cam.com/video/rw0--3y0GIA/v-deo.html Thanks for the great comments👍🏻👍🏻🛠
Howcome it says on vid back box is 30 odd quid but link takes ya to one that costs alot more
The price has changed since the video was made Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 no worries bud
So the 'tractor' noise has just started to happen on and off with mine over last 2 days. Only had a new one fitted by 'kwik fit 😑' under 2 years ago and it's corroded already. Not great is it? Might as well get one and fit one myself with this video. Oh and I'll try the sprays etc on the joints.
it should come off nice and easy if it was only fitted two years ago, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11im back here again. The new one that was put on 2 years ago has come off again today. They literally dont last that long do they?
Tried to do mine and failed miserably, eventually gave up and took it to a local garage - they checked the whole exhaust as another local garage said I needed an entire exhaust. I supplied the back box - about £35. They charged me £15 to fit it!
What did you struggle with, undoing the clamp, or the rubbers? would be great to know, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 . Clamp had rusted into place and then I couldn’t separate the back box from the rest of it.
Well here I am again, just replaced back box again! Won’t be buying Klarius exhausts again. Tried my local quick fit - they quoted over £800 - Cat, front pipe and back box, despite no signs of Cat problems. Did it in less than an hour total cost £62 for an A2A box.
Where the back box meets the long mid section does it have a gasket?
No gasket the shape of. The. Pipe makes the seal, Thanks for the great comments👍🏻👍🏻🛠
searched car part stores for this bracket cannot find it any where if some one knows where to get it i would be obliged hounslow west london
Link is in the description Thanks for the great comments👍🏻👍🏻🛠
How to change the steering fluid in this car and which fluid type is recommended?
There is no steering fluid, it has an dry electronic system, Thanks for the great comments👍🏻👍🏻🛠
Had exactly this happen on my way back from the shops today , day before its MOT
Dam, Thanks for the great comments👍🏻👍🏻🛠
Are these cars worth buying are they any good for motorways I've heard they are very under powdered just looking for something cheap and cheerful what are the common faults
They are great, cheap to buy and run super reliable, and motorway is not an issue, as for common faults I have a playlist just check out my channel aaanton11, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 I check it out thanks
I bought one last year. Never had one before, soon as I got it, I serviced it. Everything is cheap to buy, plugs, filters etc. I've had it 1 year now and I've not had one problem with it. For a 1 litre they pull ok. I went to Blackpool in mine , so I took the motorway, no probs at all.
@@PeterSmith-ls7ut thanks for your reply
Hello! what is the diameter of the clamp?
Link to exhaust clamp amzn.to/35NRi0r Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 38-52) thanks
What are the wheels on it ?
This is the link to the video on the wheels ua-cam.com/video/IjdEhu_2j3w/v-deo.html 🛠
Hi,
just to double check the hanger repair you link to says "S40 II, V50, C30, Tailpipe Hanger Exhaust Repair Clamp (48mm)" .
Is this suitable for a 107 61 reg as I have just had the issue with the hanger freeing itself from the tail pipe.
its the only one I can find that's close, it should work 👍🏻👍🏻Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Well I'll let you know what happens when it arrives.
@@aaanton11 Part arrived today (great work by Parts Monster and Royal Mail) and I have fitted it onto the car.
Not the best fit as it currently is twisting the rubber shock mount about 45 degrees due to the angle of the hook. Also the bracket isn't flat against the tail pipe so the clamping action isn't the best there either.
But it does lift the exhaust back into a more normal position and all the exhaust is clear of any body work. Shaking the exhaust box and it all looks good with nothing fouling.
Due to the cold concrete garage floor aggravating my back, I'll look at it in a few days to see if I can get more of the twist out of the rubber mount, but I doubt I will be able to.
Relatively £6:00 for clamp is very expensive
Thanks for the great information👍🏻👍🏻🛠
1:00 2:00
Thanks for the great comments👍🏻👍🏻🛠
did you hear that helicopter in 4:50
Police helicopter Thanks for the great comments👍🏻👍🏻🛠
0:15 7:35
Thanks for the great comments👍🏻👍🏻🛠
I hear a copper chopper
yes it was, right overhead, we often get it as the landing pad is round the corner, Thanks for the great comments👍🏻👍🏻🛠