Thank you for the video. I find they are a nightmare when it comes to the clamp . As you can see there is a lip on the back box and a lip on the exhaust but only 1 Grove on the clamp . I have done this job on a Citroën c1 toyota aygo and now have the same issue with a peugeot 107 . I cannot tell you how many time I have had to go back under the car to try and stop it blowing , that's everyone of them mentioned . After checking at peugeot they sell the same clamp for £10 that I can get for £4 at an exhaust supplier. I wonder if after changing you rear silencer you are having any issues? I even sealed with exhaust paste and still blowing . I would have expected a clamp that holds both lips together.
hi, i just used the old clamp and there was no problems of blowing. it actually held the two lips in the one old clamp! i just made sure both ends were clean before putting on the clamp. you could try to have your clamp to hold the two lips? Good luck!
Hi, if you have a professional lift and can lift the car high enough, then you don't need to remove the rear wheel surely! But if you only have a normal hydraulic floor jack, I really recommend remove the rear wheel, making the job much easier and most of time you work beside the car not under it. Have a good day!
followed this video and 15 minutes later new exhaust fitted saving me over £100 in fitting costs !!!
thanks for the video and your guidance.. even though I'm a woman I also managed to change my exhaust box myself because of your video 😄💪
Well done, Super Lady! Have a happy day!
@@RepairDIY thank you 🙏🤗 and a very good Day to you too !
Hi, I just want to say thankyou for taking the trouble to do this...I have just replaced mine by following your video : )
Hi, Well done. Glad to hear your success. Have a good day!
Thank you for taking the time to post the video. Very helpful indeed!
The new exhaust box looks robust with the upgraded support brackets, I’ll go to GSF for the exhaust 👍
Perfect video going into step by step full detail,thanks.
Thank you for your comments. have a good day!
That’s was really helpful for my one thanks so much for this video 👍
Thank you. Am doing my one tomorrow. Good advise sir.
Excellent video. Thank you very much.
Great video, thank you.
Great 👍
good
Useful video. Thank you :)
thank you for your comments. have a nice day!
perfect video, thank you!
Thank you for your comments! Have a good day!
What year is your AYGO? My wife has a 2013 , So is it the same rear exhaust?
Yes Aygo from 2005 to 2014 should be very similar. I think it should be the exactly same exhaust box. Have a nice day!
Thank you for your help
Thank you for the video. I find they are a nightmare when it comes to the clamp . As you can see there is a lip on the back box and a lip on the exhaust but only 1 Grove on the clamp . I have done this job on a Citroën c1 toyota aygo and now have the same issue with a peugeot 107 . I cannot tell you how many time I have had to go back under the car to try and stop it blowing , that's everyone of them mentioned . After checking at peugeot they sell the same clamp for £10 that I can get for £4 at an exhaust supplier. I wonder if after changing you rear silencer you are having any issues? I even sealed with exhaust paste and still blowing . I would have expected a clamp that holds both lips together.
hi, i just used the old clamp and there was no problems of blowing. it actually held the two lips in the one old clamp! i just made sure both ends were clean before putting on the clamp. you could try to have your clamp to hold the two lips? Good luck!
Thanks for the video. Is it necessary to remove the rear wheel or is this just for easier access?
Hi, if you have a professional lift and can lift the car high enough, then you don't need to remove the rear wheel surely! But if you only have a normal hydraulic floor jack, I really recommend remove the rear wheel, making the job much easier and most of time you work beside the car not under it. Have a good day!
Did you say this new box came from GSF? Thanks in advance.
Yes, it was from GSF. I ordered online and collected from a local branch. have a good day!
thanks very much!
very
Just weld it back on . Save money
Yeah, I would have had tried if I had a welding machine handy. Have a nice day!
Ï
Yours didn't have the gasket on?