10:29 This is freaky. Your kitchen is 99% SPOT ON as a replica of the kitchen in the house I grew up in. We had a glass top stove, and the kitchen sink was directly behind the stove and not off to the right, but everything else is basically identical down to the countertop color and cabinet placement.
@@currentconcept Its got to be either the plane launcher since I had the same exact idea when my nephew got one of those with the launcher haha. Or the ratchet strap one as that's the first on I saw and you just kept making me laugh haha
Heyo, I'm a first time viewer of your channel, and I just wanna say that you definitely have me hooked! I loved the content and the quality, and I'm excited to watch more from you in the future! Keep up the good work!!
Can we all agree that the A hose could have been attached to the bottom of the water bottle. A one-way valve allowing air to be pushed into the water bottle, pushing the water out of the water bottle
This idea has a lot of potential, and I might have a solution to make it work even better Take a camel bag, attach the air tank underneath like a lumbar pack Run an air hose from the tank into the water bladder As air gets pumped into the bladder, it'll force water out of the mouth piece Unless the mouth piece is closed in which case you've made a bomb on your back, but that's no big issue
actually the camelback could take air directly from a smaller tank, so you wouldn't need nearly as large of an air tank... Though thinking about it, the cameback couldn't take much pressure So pushing the water out usning pressurized air might compromise the bag. But coke bottles are designed to take a lot of pressure.. and for maximum jank you could make your own camelback out of two two liter coke bottles. One can hold the water and the other holds the compressed air and you plumb them together with a valve to regulate the airflow... or if you prefer less jank and more safety you could probably just use a small CO2 cylinder plumbed into the coke bottle.
@@currentconcept I may or may not have personal experience using coke bottles as pressure vessels in jank projects. (don't test the limits of a coke bottle's ability to hold pressure indoors. Your eardrums will thank you)
@@currentconcept You are your own torture device maker XD I did sub I like weird stuf like this at least the idea you had was with good intentions. But maybe a water pipe with mouth piece that pumps water would be beter on a timer ;-) stil the over engineering is Funny laughs a 10 torture a 10 practical use 5/10 looking a fool 10.
Try using an arduino uno r4. Those things pack some processing power and there is a version with an esp32 built into it so that is has wifi capabilities.
I use autodesk fusion 360 because it's free and actually pretty good at its job. There are some small limitations with the free versions but they're just annoying, not really barring you from doing anything
@@currentconcept I think we all do mistakes like this. Sometimes it's just hard to wrap your head around it. Kudos for including it! Great video! Subbed
well this was the most sub optimal way of doing everything but you did it. it would be better if you got a HUGE 500ml or bigger syringe and had a robot pushed it a good mouth full at a time. then you could use lighter robot arm to guide a rubber tube to your water receptacle or a refreshing stream of hydration. probably weight 75lbs less.
Thanks for watching, this one was a lot of fun to make when it was working correctly. Anger otherwise. Let me know what else you guys wanna see!
The design is very human.
yes very human indeed
now THIS is quality content
@@EmilyTheEngineer whoa wtf are you doing here
@@currentconcept I think I found myself two new subscribers
2:17 this guy uses this angle grinder for almost every video. FREE HIM
Nice waterboarding robot.
it seriously felt like i was drowning lol. it just kept shooting water into my nose
I dont understand a single thing about engineering im just here for the chaos
thanks mr yoshi
"Squeezer assembly" just cracked me up 😂
lol
Modern day mad scientist and I'm all for it keep it up bro
If you were barefoot and Australian you'd be "I did a thing"
(I'll admit I wasn't sure which channel's vid I'd clicked on during that intro)
Yeah opening scene was definitely inspired by him lol
Seriously, you should apply this a patent, you never know when you need it! Please do more video!!!
You should have painted the tank to say "Definitely not a bomb"
@@GrumpyIan thats so smart, so that way I'm not confused for someone doing nefarious deeds!
@@currentconcept Exactly.
Fantastic, can't believe your channel isn't bigger
thank you 🙏
The zoom audio quality on the discord meeting is so funny lmao
10:29 This is freaky. Your kitchen is 99% SPOT ON as a replica of the kitchen in the house I grew up in. We had a glass top stove, and the kitchen sink was directly behind the stove and not off to the right, but everything else is basically identical down to the countertop color and cabinet placement.
must've been the same house blueprint maybe?
@ house twins?
This is the funniest shit I've seen this week so far XD
Thought to myself, this video is great. I should subscribe! Realize I already am and that's why I saw it.
well thanks for stopping by again, lol
it's time to drink water
and with this video, i am now all caught up!! loved all of it dude, keep up the good work and ill be around to catch future projects! you're awesome!!
Thanks man! Glad you liked em all. The early ones are pretty rough lol.
Which was your favorite?
@@currentconcept Its got to be either the plane launcher since I had the same exact idea when my nephew got one of those with the launcher haha.
Or the ratchet strap one as that's the first on I saw and you just kept making me laugh haha
Amazing, I am so glad this was in my recommendations. Quality video idea and top-tier performance. I need more of this!
Haha thanks
@@currentconcept Thank you too!
9:03 a scene of a man accepting his fate
😭
Crying laughing watching this
lol glad to hear it
The editing in this video was great! Good job editor!
thank you! I appreciate it
Great video better then mark rober
Heyo, I'm a first time viewer of your channel, and I just wanna say that you definitely have me hooked! I loved the content and the quality, and I'm excited to watch more from you in the future!
Keep up the good work!!
thank you so much! glad you enjoyed it :)
The design is very human 🤣👍
The CIA is taking some serious notes right now
finnaly. i can be hydrated
how does this have less than 10k views. this is a great vid 👍
Thank you! It'll get there eventually. I believe
Can we all agree that the A hose could have been attached to the bottom of the water bottle. A one-way valve allowing air to be pushed into the water bottle, pushing the water out of the water bottle
I totally agree. The squeezer was absolutely not the best solution lol. I just got too deep into it and refused to let go
This idea has a lot of potential, and I might have a solution to make it work even better
Take a camel bag, attach the air tank underneath like a lumbar pack
Run an air hose from the tank into the water bladder
As air gets pumped into the bladder, it'll force water out of the mouth piece
Unless the mouth piece is closed in which case you've made a bomb on your back, but that's no big issue
lol, nah I see no issues with that at all. I love that idea though. Didn't even think of using a camelback. you should be running this channel
actually the camelback could take air directly from a smaller tank, so you wouldn't need nearly as large of an air tank...
Though thinking about it, the cameback couldn't take much pressure So pushing the water out usning pressurized air might compromise the bag.
But coke bottles are designed to take a lot of pressure.. and for maximum jank you could make your own camelback out of two two liter coke bottles. One can hold the water and the other holds the compressed air and you plumb them together with a valve to regulate the airflow...
or if you prefer less jank and more safety you could probably just use a small CO2 cylinder plumbed into the coke bottle.
this is awesome. I love wack solutions such as this
@@currentconcept I may or may not have personal experience using coke bottles as pressure vessels in jank projects. (don't test the limits of a coke bottle's ability to hold pressure indoors. Your eardrums will thank you)
@@johnsch8634 well gee it sounds like ive got some testing to go do
Something that launchs Doritos into your mouth would be pretty funny.
lol that's a great idea
Ah, fried oranges... Just like my grandma used to make them. Till she burned the house down of course
i love the usage of memes
Just... dont go in a airport
like, ever?
1:26 LMAOOOOOO
You just made a device to voluntarly water board you.
ya darn right I did
@@currentconcept You are your own torture device maker XD I did sub I like weird stuf like this at least the idea you had was with good intentions. But maybe a water pipe with mouth piece that pumps water would be beter on a timer ;-) stil the over engineering is Funny laughs a 10 torture a 10 practical use 5/10 looking a fool 10.
you are very underrated
thank you
Love it
Love the dirt bike.
1:15 One man, One piston
I'm just here to boost the algorithm. This video is great 🤣
Thank for the measurement I can’t understand American. 0:19
idk what eggo is but I like their socks
Yooo Michael Reeves would love/hate this
(1:13)
No, NO, NO- Oh.
Banger vid!
thank you!!
Absolutely hysterical 😂😂😂😂😂😂
Try using an arduino uno r4. Those things pack some processing power and there is a version with an esp32 built into it so that is has wifi capabilities.
I do need to step into R4/Pi land soon
hey there, awesome 3d prints, i was wondering which cad software u are using? best whishes
I use autodesk fusion 360 because it's free and actually pretty good at its job. There are some small limitations with the free versions but they're just annoying, not really barring you from doing anything
@ awesome thanks, i will try this software
The cia could use this when they need a break honestly
im just trynna help yknow
Did you know they make really big syringes?
I do now
RUNN HUMAN BOMB
Chiiiiill
Eggo socks
2:20😂😂😂
Just get a xiamoi electric pump, fast and portable
3:21 Dat ass. How about a vid about that car? That thing is sweeeeet.
haha thanks. the car is too nice to be in a vid... you know what it is?
@@currentconceptlooks like an ss chevelle
@@Idontknowmaybejohnsmith very nice. Its not an SS, but it is a 71 Chevelle
I love the are do eye no, I personally have a ra speri ply
1:55 ahahahahahaah
I legit thought this would work. I am an idiot lol
@@currentconcept I think we all do mistakes like this. Sometimes it's just hard to wrap your head around it. Kudos for including it! Great video! Subbed
Let's gooooo
what's up square?? good to see you again
Does it work with Modelo?
this guy trynna get (yes) me demonitized 💀
5:28 The thumbnail face
well this was the most sub optimal way of doing everything but you did it.
it would be better if you got a HUGE 500ml or bigger syringe and had a robot pushed it a good mouth full at a time. then you could use lighter robot arm to guide a rubber tube to your water receptacle or a refreshing stream of hydration. probably weight 75lbs less.
haha yeah this certainly wasn't the best way to do it. it actually only weighed about 40 pounds total!
Please for the sake of god, change to a cordless angle grinder its safer because you can control the speed
8:30
hello
DUDE UR VIDEOS ARE ADICTIING TO WATCH AND THEY ARE WAY TOO UNDERRATED ITS NOT EVEN FUNNY
haha thanks
Looks pretty gay 😂
How does this guy have a wife
im gay?
couldnt watch beyond 5 min, wasted 5 min of life best video to show how to waste resources to make money
I love a good manglebrinder
arent they just the best