Anycubic Photon M3 Max questions for any kind soul please: 1. What frequency is the FEP supposed to be tuned to? 2. Does the FEP spacer still require the "13mm" bottle cap depicted in their official FEP Replacement video or is the M3 Max a different calibration? (I have seen some 19mm spacers from users.) 3. What is the torque setting for the screws on the FEP sheet? 4. Replacing the Glass under the LCD left a gap on one side is there a way to combat this? As the adhesive strip needs to be as far out of the print area, and on the perimeter as possible. 5. Anyone able to fix the touch screen not responding often? Generic Questions: 1. Does anyone consider that the FEP has to be the same temperature as during normal operations while installing the new sheet? I'm sure temperature has some (if negligible) difference?
Anyone having issues with this printer after leveling hearing a knock noise when it first comes down on the print. I’ve re done the leveling with paper and with just the bed and either way I’ve had two prints where I didn’t hear it but then the print was crap and come off the fep.
PERFECT! Thank you for such a clear and well presented video, really helpful :)
Thank you so much 😁🔥
Anycubic Photon M3 Max questions for any kind soul please:
1. What frequency is the FEP supposed to be tuned to?
2. Does the FEP spacer still require the "13mm" bottle cap depicted in their official FEP Replacement video or is the M3 Max a different calibration? (I have seen some 19mm spacers from users.)
3. What is the torque setting for the screws on the FEP sheet?
4. Replacing the Glass under the LCD left a gap on one side is there a way to combat this? As the adhesive strip needs to be as far out of the print area, and on the perimeter as possible.
5. Anyone able to fix the touch screen not responding often?
Generic Questions:
1. Does anyone consider that the FEP has to be the same temperature as during normal operations while installing the new sheet? I'm sure temperature has some (if negligible) difference?
Youre manic...buy one and read the damn instructions
@@stanlee2200 Maniac for seeking information that is not listed in the instructions whatsoever? Okay.
Anyone having issues with this printer after leveling hearing a knock noise when it first comes down on the print. I’ve re done the leveling with paper and with just the bed and either way I’ve had two prints where I didn’t hear it but then the print was crap and come off the fep.
Mine has this thing that when it's level it pushed a little more and make a thump noise twice then starts to print. No print issues. 👍🏻☺️
Fep is supposed to be foggy mate
Yo where's part two?
Coming this week, did you need help with anything specific ☺️🔥
@@FWA4 I had figured out what I needed to know ty though!
@@FWA4 okay i figured out what i need some help with. I cant figure out what kind of file i need to be able to import it to the photon workshop
no wifi on this printer 👎
Why would WiFi matter? 🧐🔥