Ugh, had I taken fifteen minutes out of my life to watch this I could have avoided the issues I came across. Thank you for the super easy directions and answers to my questions!
Thanks for this. Just got this printer. After pressed the home button and Ieveled it, I adjust the movement up the z about .01mm so the drag wasn't so tight. But it wouldn't let me save the "z=0" setting because it said I have to use "home" mode. And when I went to home mode, the build plate sounded like it was continually going down and wasn't stopping. So I cancelled the "home" mode and raised it up and loosened screws then it finally worked with "home" mode. Seems the screws have to be loosened (so it can adjust its position) for the "home" mode to work properly. But yeah, adjust to .01mm up didn't allow me to save the "z=0" since I adjusted after "home" mode.
I have actually started using mine solely outside, shaded from the UV of the sun of course, and bring it inside whenever it's not in use. I also only handle liquid resin while wearing a respirator, get one with filters for organic vapors (replace every 6 months). Always better to be safe than sorry.
Buy Photon M3: geni.us/ypWC7wAEdit
Water washable resin: geni.us/FXJ2i
Recommended: geni.us/JustVlads
Ugh, had I taken fifteen minutes out of my life to watch this I could have avoided the issues I came across. Thank you for the super easy directions and answers to my questions!
Thanks for this. Just got this printer. After pressed the home button and Ieveled it, I adjust the movement up the z about .01mm so the drag wasn't so tight. But it wouldn't let me save the "z=0" setting because it said I have to use "home" mode. And when I went to home mode, the build plate sounded like it was continually going down and wasn't stopping. So I cancelled the "home" mode and raised it up and loosened screws then it finally worked with "home" mode.
Seems the screws have to be loosened (so it can adjust its position) for the "home" mode to work properly. But yeah, adjust to .01mm up didn't allow me to save the "z=0" since I adjusted after "home" mode.
My leveling paper always is stuck when Zi press home
Does anyone know how to change the fep on this machine?
Should i not use my curing and washing machine then? Or should i let it air dry then use the curing machine?
Is the filter you use specific for resin? Or is it like a coffee filter?
i bought one two years ago, question, I have a very very small room in my parents place. Is it loud and do i need ventilation?
It absolutely needs ventilation.
I have actually started using mine solely outside, shaded from the UV of the sun of course, and bring it inside whenever it's not in use. I also only handle liquid resin while wearing a respirator, get one with filters for organic vapors (replace every 6 months). Always better to be safe than sorry.
nice video
thank you
Rad thanks
cool
Oh i know this voice justvlad my main fdm 3d printer setup tutorial master now i have you doing resin im thinking getting 1 soon