How to flange a PVC surf rod holder + Plus bonus surf fishing! Easy DIY 5 min project
Вставка
- Опубліковано 9 жов 2020
- Super easy to follow and quick video how to flange pvc with 2 simple tricks
Wondering what Fishing gear i use..? Need to buy some gear but dont know where to start all the gear linked below is what i use 90% of the time i'm on the water, from bay fishing to the surf and everywhere in between , i personally recommend these items
Main reel amzn.to/2VVz7RQ
Fishing pole amzn.to/2VX2cw3
Favorite combo amzn.to/2ZPqVUf
Budget reel amzn.to/2ZK15kx
Best reel under 50$ amzn.to/2Crjbjw or amzn.to/3g3W0ty
No Budget Reel amzn.to/38yrWEb
Baitcaster amzn.to/3fbI1lB
My baitcaster amzn.to/31VkeCA
Inshore baitcasting Rod amzn.to/3iFyllz
Best leader line amzn.to/3fdMILK
5 strand Fishing line amzn.to/2ZLTaTJ
9 strand fishing line amzn.to/2VVYToM
Fish grips amzn.to/3f6ZkEw amzn.to/38D7vWp
Wade Fishing net amzn.to/3gtI3Wi amzn.to/2Z8FmDE
Reg fishing net amzn.to/3f9nAG1
Bubba Fillet knife amzn.to/2BNanEm
Dexter fillet knife amzn.to/31VX3IC
Minnow/ perch trap amzn.to/2EPcsRz
Favorite lures bomber crankbait amzn.to/3ecNJlL
Vudu shrimp amzn.to/3iDOTu8
Vudu mullet amzn.to/2VVw9wA
Z-Man swim bait amzn.to/32M6okP
Fish bites amzn.to/31QMJBz
Best jetti top water money can buy amzn.to/3gSuIqe
Gold spoons for jetty fishing amzn.to/32IEztG
Silver spoon for jetties amzn.to/3lFFZhm
Berkeley gulp shrimp amzn.to/2DZLkif
LETTSSSS GOOOOOO Tight Lines yall PEACE !!!
FACEBOOK : profile.php?...
#SurfRod
#Flange
#howtoflangepvc - Спорт
Great idea and a nice fish caught at the end xx
Great idea and looks so much better than just cut edge
Glad you like it!
Only thing is when you bang on it to drive it down, the flanged area will break. I left mine alone and it works great.
Yeah just cut a notch and file/sand all burred edges on the top of the spike smooth.
The reel support arm will fit nice and not move around.
Also if you're pounding the spike into dense sand with a dead blow hammer, use a cut piece of 5/8" plywood as a buffer. 12" × 6 " × 5/8"
Great video keep up the good work
Awesome idea bro, watched all the videos for your build and this is a great design. Keep up the good work 🙏🏻🙏🏻
Thanks brother
It's easier to use a small deep fryer with cooking oil. Doesn't burn the pvc and you can make a flat flange. I do this with pvc speaker ports
First time viewer...great video
Awesome! Thank you!
Not an allen wrench lol channel locks but good video man
yeah when i got back to edit it im thinking to my self what was i thinking
@@TridentFishing it happens lol FISH ON!
Nice!!!
Thanks!
does the flange make it too big to suck the air out when putting it in the sand?
What size PVC pipe do you recommend? Thx!
Looks like padre island
👍
try a pot of boiling water
Would it be a thing to maybe add some type of cushion on the lip, like foam or even tape of some sort?
iv thought about it , but with it flange open its not very rough on your reel like this
@@TridentFishing I bought a can of
Plasti-Dip Spray Rubberized Coating @ Lowes to spray the top lip and exterior just for the heck of it. The stuff may just peel off in routine use being thrown around and with sand, but it's a tool, not a piece of art haha.
@@BeckVMH for sure man ,,,,, tight lines
If you're concern is a sharp edge, just use a file or sandpaper.
Why do you have to flange the pvc
What you call an Allen wrench I call Chanel lock pliers.
yeah that was my bad , i was gonna add a note in post but was like ehh what ever,,
@@TridentFishing Probably shouldn't have said anything, but it felt so good to be pointing something out to someone else as I make the same kind of blunders all the time and am on the receiving end myself. just having a little fun at your expense no harm intended. Ha ha.
Yeah I was wondering what he was going to do with the Allen wrench😂
I don't have a working heat gun so I just use a blowtorch but now that I've been reading comments I'm pretty excited about the whole hot water or oil thing