So as anyone can see on my profile picture I am a Mopar guy. But I gotta say this video just damn near tilted me all the way to my decision about getting an SC400 and yes I want to manual swap it. Great video!!! Listening to your car made my heart beat faster. Just like my HEMI use to do. I owned an 89 Supra when I was 25 and now I'm 43 and about to go back to JDM. Again great video.
@@StriViK I really appreciate that! Can't wait to make sweet noises with my UZ too!!! Until then I'll keep watching great videos like yours for inspiration! 💪👌🙌
@@StriViK I saw this in another video. Looks like swapping 6 speeds to these older Lexus models is becoming a little lighter on the wallet. Have all the CEL codes been figured out?
@@WarriorsPhoto So there are a few ways around the Check Engine Lights when you do your swap. Easiest way: Get a AT Emulator from all4swap, you have to wire it in and it'll do the rest except 3 lights will still be on. Install a resistor on each of the solenoid wires, I believe there are 3 or 4, this will remove all CELs. Another way is to keep your solenoids and and all the electronics from your auto transmission plugged in and just tucking it away somewhere.
How do you plan on getting rid of the check engine light? It sound so good 1uz is coming to light and I hope the engine get the same popularity as the 2jz
I will be installing a AT Emulator, will make a video on that but it will a while until I get my other car done. UZs are slowly getting popular but we'll know for sure in time, they have a lot of potential.
what trans are you using and how did you wire in the speed sensor? i was going to order a CD009 but they don’t have speed sensors internally so i would have to set the speedo to work off GPS (not something i wanna do) are you running your speed sensor off ABS? or off GPS? also, what exhaust?? sounds amazing. great build
You can check my other video on the details for the swap. The exhaust is stock except no mufflers in the back. The speed is coming from the ABS sensor.
@@StriViK will do! thanks for the reply! figuring out an ABS solution is preferred so it’s awesome to hear you’ve done it successfully. definitely gonna give the video a watch though. earned a sub also :)
Hi Ethan, yeah this was done at Texas Performance Industries in Houston, Texas. Shop is owned by a friend so he helped me with this swap. The IS350 is a hell of a fun car but after driving manual JZs and my UZ there is no comparison. Hope you get one!
How’s the lighter flywheel and aluminum drive shaft? Harsher nvh? Is the it as responsive as you’d like? I drove a friends g35 with a really light flywheel and hated it, but when I swap my 98sc400 I would like it to rev freely
You'd want to get a lighter flywheel for better rev matching and it makes the car more fun to drive. However, I'd say if you have a purely daily use for the car then go with a stock weight flywheel. At first when I swapped to a lighter flywheel I regretted it because it'd be easy to stall but I later realized it's not just the flywheel causing that but also the clutch. The SPEC Stage 2 clutch I have bites hard but doesn't is quite stiff, so maybe lighter flywheel + OEM feel clutch will be better. Currently I'm used to the lightweight flywheel and the clutch, because I know where the bite points are and how the car will react on zero speeds or a hillclimb it's not much of an issue for me but I still have to give thought to it. Driving fast is a different story, the engine revs faster, I get back on the power faster, downshift and rev matching is a pure joy that you can get with your regular weight flywheel but with a lighter one it's even more fun. I went with a higher torque clutch because I will be turbo'ing the car later sometime next year so I won't have to switch the clutch to a higher rated one. As for NVH, I was worried that the driveshaft will make noise but to my surprise I have not experienced any additional NVH even going at speeds of 140mph+. The car is extremely response because of the lightweight components and there is no delay in the power. I think a aluminum driveshaft doesn't make the biggest difference but since at the time the difference between the steel and aluminum one was only $100 I went with aluminum. I am having some chatter at idle with my flywheel however Forward Momentum was also having the same issue but he changed his engine mounts and that solved the issue for him. My engine mounts are bad too so I can give a update once I swap to new engine mounts because there is a lot of movement on the drivetrain. In short, if you want a daily/cruiser, get a OEM style flywheel with OEM style clutch or lightweight flywheel with OEM style clutch. If you like to race, spirited driving, touge and what not, a lightweight flywheel is highly recommended and depending on your power goals you can keep the OEM style clutch or get a high torque rated clutch.
Noice , I have a 99 1uzfe and I want the 5 or 6soeed swap . I know the price is the difference . However what do u recommend if gas mileage and 500 hp is the goal . Don’t lol . It’s my daily and my stock 290 hp sucks about 15.8mpg . Lol
@@StriViK i have a 3.26 diff sitting in my garage how does the gearing feel to long or just right? 3.92 are short but accel hard mostly spinning even with slicks
@@dannylam4784 gearing feels just right. It's good for street setup but if you're looking for something more drift or racing friendly maybe 3.92 is better. I'd also recommend 3.76
So as anyone can see on my profile picture I am a Mopar guy. But I gotta say this video just damn near tilted me all the way to my decision about getting an SC400 and yes I want to manual swap it. Great video!!! Listening to your car made my heart beat faster. Just like my HEMI use to do. I owned an 89 Supra when I was 25 and now I'm 43 and about to go back to JDM. Again great video.
I wonder how the swap went? Picking one tmr 🤞🏾 planning on doing the same thing 😅
Unfortunately life got in the way. I haven't even gotten the car yet because I had to replace both my car and my wife's car.
Absolutely kino.
The acceleration at 4:12 is so beautifully raw sounding, and then the overrun 4:27 is fucking bliss.
Appreciate the love as always
Sounds amazing you should make more of these 🔥🔥
Thank you, I plan to! Maybe have a comparison between different types of exhaust on the same engine.
@@StriViK whats the current exhaust setup?
@@Chenzo_400 all stock except no secondary mufflers
Brooooo, that thing RIPS!!!! It sounds so good and looks like it drives great. Awesome work man.
Appreciate it!
Sounds fucking unreal. I've got a 1UZ swapped MX83 Cressida that I'm manual swapping and I'm so excited.
Truly is a great sound
Damn wtf this one sounds different and really good. Like a muscle car
I wish the LS400 came in a manual. One day I'll manual swap mine, but I want the center console to look nice still.
It sounds so amazing I love the 1uz Fe
She purrs!
Music to my ears
Sounds awesome! Congratulations!
Thanks! I've been following your UZ swap for a while, looking real good so far
@@StriViK I really appreciate that! Can't wait to make sweet noises with my UZ too!!! Until then I'll keep watching great videos like yours for inspiration! 💪👌🙌
Music to my ears!🧐👌🏻
Thanks man!
Amazing dude 🔥
Appreciate it!
Car that should of been!!!
good job
That 1UZ engine sounds glorious.
The notes from your exhaust are like an orchestra.
I am guessing you are using a V100 from a Supra?
Thank you, I'm using a 350z transmission
@@StriViK I saw this in another video. Looks like swapping 6 speeds to these older Lexus models is becoming a little lighter on the wallet.
Have all the CEL codes been figured out?
@@WarriorsPhoto Yeah if you install an Emulator or do the wiring + resistors yourself then all CELs will go away.
@@StriViK Help me understand that statement. 🤔
I’ll do research 🔬 as well.
@@WarriorsPhoto So there are a few ways around the Check Engine Lights when you do your swap.
Easiest way: Get a AT Emulator from all4swap, you have to wire it in and it'll do the rest except 3 lights will still be on. Install a resistor on each of the solenoid wires, I believe there are 3 or 4, this will remove all CELs.
Another way is to keep your solenoids and and all the electronics from your auto transmission plugged in and just tucking it away somewhere.
That jaunt clean my boy
Sounds awesome. You just need to add twin turbos to it and turn it into an absolute weapon.
Thanks! That's the plan!
Wow
How do you plan on getting rid of the check engine light? It sound so good 1uz is coming to light and I hope the engine get the same popularity as the 2jz
I will be installing a AT Emulator, will make a video on that but it will a while until I get my other car done.
UZs are slowly getting popular but we'll know for sure in time, they have a lot of potential.
Haha my engine light stays on no matter what - 93 sc400
damn this is dope
nice！！！
what trans are you using and how did you wire in the speed sensor? i was going to order a CD009 but they don’t have speed sensors internally so i would have to set the speedo to work off GPS (not something i wanna do) are you running your speed sensor off ABS? or off GPS?
also, what exhaust?? sounds amazing. great build
You can check my other video on the details for the swap. The exhaust is stock except no mufflers in the back. The speed is coming from the ABS sensor.
@@StriViK will do! thanks for the reply! figuring out an ABS solution is preferred so it’s awesome to hear you’ve done it successfully. definitely gonna give the video a watch though. earned a sub also :)
Sounds great, What exhaust set up do you have on it?
No secondary mufflers on a stock system
What transmission is that
CD009 from a 350z
Did a shop do the swap for you? Thinking about picking up a soarer, either 1jz or 1uz, whenever I sell my Lexus is350!
Hi Ethan, yeah this was done at Texas Performance Industries in Houston, Texas. Shop is owned by a friend so he helped me with this swap. The IS350 is a hell of a fun car but after driving manual JZs and my UZ there is no comparison. Hope you get one!
Is that the cd009 transmission?
Yes it is
Will there be a video about adding power to the v8?
Yes but I'm not sure when, I'm collecting parts for a turbo setup at the moment.
If you do a light weight pulley system or light weight flywheel please link the parts
@@Mr_New_Orleans Check my other video for that info
how much was the swap
How’s the lighter flywheel and aluminum drive shaft? Harsher nvh? Is the it as responsive as you’d like? I drove a friends g35 with a really light flywheel and hated it, but when I swap my 98sc400 I would like it to rev freely
You'd want to get a lighter flywheel for better rev matching and it makes the car more fun to drive. However, I'd say if you have a purely daily use for the car then go with a stock weight flywheel.
At first when I swapped to a lighter flywheel I regretted it because it'd be easy to stall but I later realized it's not just the flywheel causing that but also the clutch. The SPEC Stage 2 clutch I have bites hard but doesn't is quite stiff, so maybe lighter flywheel + OEM feel clutch will be better.
Currently I'm used to the lightweight flywheel and the clutch, because I know where the bite points are and how the car will react on zero speeds or a hillclimb it's not much of an issue for me but I still have to give thought to it. Driving fast is a different story, the engine revs faster, I get back on the power faster, downshift and rev matching is a pure joy that you can get with your regular weight flywheel but with a lighter one it's even more fun. I went with a higher torque clutch because I will be turbo'ing the car later sometime next year so I won't have to switch the clutch to a higher rated one.
As for NVH, I was worried that the driveshaft will make noise but to my surprise I have not experienced any additional NVH even going at speeds of 140mph+. The car is extremely response because of the lightweight components and there is no delay in the power. I think a aluminum driveshaft doesn't make the biggest difference but since at the time the difference between the steel and aluminum one was only $100 I went with aluminum. I am having some chatter at idle with my flywheel however Forward Momentum was also having the same issue but he changed his engine mounts and that solved the issue for him. My engine mounts are bad too so I can give a update once I swap to new engine mounts because there is a lot of movement on the drivetrain.
In short, if you want a daily/cruiser, get a OEM style flywheel with OEM style clutch or lightweight flywheel with OEM style clutch.
If you like to race, spirited driving, touge and what not, a lightweight flywheel is highly recommended and depending on your power goals you can keep the OEM style clutch or get a high torque rated clutch.
Noice , I have a 99 1uzfe and I want the 5 or 6soeed swap . I know the price is the difference . However what do u recommend if gas mileage and 500 hp is the goal . Don’t lol . It’s my daily and my stock 290 hp sucks about 15.8mpg . Lol
300zx trans
how did you get the gauge cluster to work with the CD009?
98+ Cars use the speedometer from the wheel sensor, instead of the transmission.
Straight piped?
Deleted only secondary mufflers
That mic must be by the intake
Where did you get that shifter knob ?
It's a custom made shift knob
Which manual box you go with cd009 or v160? I went cd009 route
CD009
@@StriViK U have 3.26 DIFF OR 3.92?
@@dannylam4784 3.26
@@StriViK i have a 3.26 diff sitting in my garage how does the gearing feel to long or just right? 3.92 are short but accel hard mostly spinning even with slicks
@@dannylam4784 gearing feels just right. It's good for street setup but if you're looking for something more drift or racing friendly maybe 3.92 is better. I'd also recommend 3.76
Adapter kit used?
I have all the details in my other video. The kit and parts.
What’s done to the exhaust?
All stock except no secondary mufflers
Nice I have no res and no mufflers shit sounds so good I got the gs400
@@manwell8082 that's nice, I used to have a GS400 with a similar exhaust setup and it sounded pretty damn good under throttle
What differential? Stock?
Stock 3.26 differential
@@StriViK thank you! and also, how did you get your speedometer to work? GPS Speed sensor?
@@stancedolympic718 98+ SCs speedos work with the ABS sensor so need for anything.
This is auto how you saying it’s a manual?
Bruh...