{Pt 3/5} How To Make A Turning Sloyd Knife - Nic Westermann (Establishing Profile & Grinding Bevel)
Вставка
- Опубліковано 4 лип 2024
- I spent time with renowned tool maker Nic Westermann of ‘Hewn & Hone’ at his workshop in rural Wales
=============================================================================
Click the links below to access the tools and materials referenced in this video:
Stropping Compound - www.hewnandhone.co.uk/product...
Thermocouple Reader - www.hewnandhone.co.uk/product...
Thermocouple - www.hewnandhone.co.uk/product...
Wraparound Table - www.hewnandhone.co.uk/product...
Turning Sloyd Blank - www.hewnandhone.co.uk/product...
Turning Sloyd Blade - www.hewnandhone.co.uk/product...
Knife Jig (Round Tang) - www.hewnandhone.co.uk/product...
Knife Jig (Flat Tang) - www.hewnandhone.co.uk/product...
Raised Platten - www.hewnandhone.co.uk/product...
Grit Belts - www.hewnandhone.co.uk/product...
=============================================================================
Connect with Hewn & Hone using the links below:
Hewn & Hone Website - www.hewnandhone.co.uk
Hewn & Hone Instagram - / hewnandhone
=============================================================================
The other videos I filmed with Nic Westermann:
Nic Westermann - Important updates, Ordering tools, Waiting list, Etc - • Nic Westermann - Impor...
Hewn & Hone - Introduction by Nic Westermann - • Hewn & Hone - Introduc...
[Step by Step] Build A Two & Half Brick Forge - Nic Westermann - • [Step by Step] Build A...
(Pt 1/5) How To Make A Turning Sloyd Knife - Forging, Annealing & Rough Shaping - • {Pt 1/5} How To Make A...
(Pt 2/5) How To Make A Turning Sloyd Knife - Heat Treat - • {Pt 2/5} How To Make A...
(Pt 3/5) How To Make A Turning Sloyd Knife - Establishing Profile & Grinding Bevel - *THIS VIDEO YOU ARE WATCHING*
(Pt 4/5) How To Make A Turning Sloyd Knife - Handle Making & Fitting - • {Pt 4/5} How To Make A...
(Pt 5/5) How To Make A Turning Sloyd Knife - Sharpening & Maintenance - • {Pt 5/5} How To Make A...
=============================================================================
Below is a timestamp of all the sections in this video:
(Click on the time on the left to go straight to that section)
00:00:00 - Start
00:00:02 - Introduction
00:02:22 - Recap
00:03:54 - Initial grinding
00:04:29 - 36 grit belt
00:04:52 - Don’t overheat blade
00:05:40 - Belt grinders
00:06:15 - Health & safety
00:07:50 - Grinding profile
00:11:24 - Sorby pro edge
00:13:27 - 60 grit belt
00:13:43 - Concave spine
00:16:00 - 600 grit belt
00:16:55 - Polish tang
00:17:35 - Profiling complete
00:18:19 - Polish spine & tang
00:23:38 - Freehand grind bevel
00:24:29 - Knife jig
00:25:34 - Wraparound table & Raised platten
00:26:47 - Primary grind
00:28:28 - Belt tension & tracking
00:29:26 - 60 grit belt
00:29:48 - Grinding primary bevel
00:31:58 - 120 grit belt
00:32:33 - Grinding primary bevel
00:33:18 - 400 grit belt
00:33:35 - Grinding primary bevel
00:35:02 - Edge bevel
00:36:23 - 120 grit belt
00:36:42 - Grinding edge bevel
00:40:20 - 400 grit belt
00:42:10 - Grinding edge bevel
00:43:43 - 1,200 grit belt
00:44:10 - Grinding edge bevel ****
00:45:42 - Advice grinding tip
00:47:20 - Sharpening & stropping
00:47:54 - Jig round & flat tang
00:51:21 - Conclusion
00:52:26 - Outro
=================================
As always I appreciate you watching
Take care
Peace
Zed
#blacksmith #toolmaking #knifemaking - Розваги
Nic Discusses 'Hewn & Hone'
ua-cam.com/video/DMyiuNVnm-Q/v-deo.html
******************************************************
Nic Teaches How To Build A Brick Forge:
ua-cam.com/video/uipHqb5Sd98/v-deo.html
***********************************************************
Nic Teaches How To Make A Sloyd Carving Knife:
Watch Part One - ua-cam.com/video/eiC33lMBet8/v-deo.html
Watch Part Two - ua-cam.com/video/J06t8JqYK_U/v-deo.html
Watch Part Four - ua-cam.com/video/7xyinCcMC9M/v-deo.html
Watch Part Five - ua-cam.com/video/Ad78TRQe2is/v-deo.html
Great work guys! I’m blessed to have a couple blades by Nic. Wish I had more!
Very cool you have some of Nics blades! I still have some of his blades i've yet to add to my colelction at some point ~Peace~
I really appreciate Nic's humble workshop. Just goes to show you that you don't need a whole bench lined with 2x72s to make top notch tools. Thanks again.
Especially on smaller blades these machines produce very good results, I do have a 2x72 albeit home built, but have always been a fan of the ProEdge as it's a great entry level machine that can also work in a production environment.
Nics workshop is definitely fine tuned for him to be able to produce the high quality tools as consistently as he has been doing for many years ~Peace~
Thanksv Ned
So glad to be on this subject
I'm building my own carving tools.
Hay Nic BIG THANKS FOR HELPING
Glad its of interest, love the typo as well. Ned and Zic....
Appreciate the kind words John and once the remaning two videos of this series are published this week, it'll hopefully teach you the entire process from start to finish ~Peace~
His jig is ingenious! I have one of those small cheap belt grinders , 1 x 30 inch I believe and even I could jig it up. Thanks for sharing your jig, Nick!
Chuffed to hear you enjoyed the video Scott and found it useful ~Peace~
Thank you again Zed and Nic for a very informative and interesting video.
You are very kind thank you ~Peace~
Very nice work again. Thanks for your videos. Cheers. Jim
Thank you kindly Jim ~Peace~
Danke für's Teilhaben lassen
Du bist sehr nett, danke ~Peace~
You look like brothers 😊
He's the better looking one! :) ~Peace~
Thank you both, that was truly excellent.
You are very kind Richard thank you ~Peace~
Thank you Zed and Nic, this serie is a pure joy to watch ❤
Sincerely appreciate your kind words and for watching ~Peace~
A very practical tutorial…thoroughly enjoyable presentation…always interesting to understand the theory behind the method…cheers from the Snowy Mountains Australia
You are very kind Andrew thank you ...but I have to ask, you have snow in Australia? ;) ~Peace~
Hi Zed..we sure do…. Our ski season runs from June to October…11 resorts and not uncommon to get snow in many parts of southern New South Wales,Victoria and Tasmania
good show, cheers Zed
You are very kind thank you ~Peace~
Nice.
Thank you ~Peace~
I’m interested to see how Nick keeps the round tang from spinning in the handle with use. 🎸🔪
Handle video comes out later today which addresses that, suffice to say a round tang doesn't spin at all when in the handle ~Peace~
Briliant work Cheeers ❤❤❤❤❤❤Exlilant
Thank you so much my friend ~Peace~