Making a Drop Point Hunting knife, without the use of a belt grinder

Поділитися
Вставка
  • Опубліковано 24 гру 2024
  • Custom Knife Making: The "No Belt Grinder" Drop Point Knife. Knife making with common tools.
    Thank you for joining me on my channel. Today, we will be making a Drop Point Hunting knife, using only commonly available tools that you will find at any local hardware store. No belt grinder was used for this build. I made this knife using 3,2mm 1070 steel for the blade, 3,2mm steel pins, 6mm Carbon Fiber tube for the Lanyard hole and Rhodesian Teak for the scales. Feel free to use whatever you have available or prefer. Don’t forget to like and subscribe.
    Download the template from below link:
    drive.google.c...
    01:00 Cutting the Profile
    01:30 Hand filing the profile
    02:30 Mark and drill the pinning holes
    04:20 Mark the plunge lines and bevel areas
    07:00 File the plunge lines and bevel areas
    12:50 File the sharpening choil
    13:40 Prepare the steel pins
    16:13 Prepare the wood scales
    18:23 Rough shape the scales
    23:29 Heat treat the blade
    26:30 Remove the warp from the blade
    28:50 Hand sand the blade
    33:12 Prep the scales for glue-up
    34:49 Glue and assemble the knife
    37:38 Clean up the pins
    38:18 Peen the pins
    39:00 Shape the scales
    34:20 Sharpen the blade
    DISCLAIMER:
    The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Zeeman Knives will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including losses, damages, or injuries sustained while you were trying to emulate the actions and projects on this channel).
    Always wear the appropriate safety clothing.

КОМЕНТАРІ •

  • @danielcarter8390
    @danielcarter8390 2 дні тому +1

    stunning thanks for the video

  • @glennwidelko
    @glennwidelko 2 дні тому

    Stunning knife … in both design artistry … and build craftsmanship … and a lekker accent nog al … thank you for sharing … 🙏🇬🇧🇬🇧🇬🇧

    • @zeemanknives
      @zeemanknives  День тому

      Hehehe...fellow South African living abroad? Thanks for watching!

    • @glennwidelko
      @glennwidelko День тому

      @@zeemanknives Ja … ex-Cape Town boy … living in Scotland … love your craftsmanship … as do the many people who are also discovering your channel … beste vir Kersfees … 🙏🇬🇧🇬🇧🇬🇧

  • @jasonhojnacki2234
    @jasonhojnacki2234 9 місяців тому +7

    This was the best video on the subject of knife making I have ever watched. Thank you so much

    • @zeemanknives
      @zeemanknives  8 місяців тому

      Thank you, appreciate the comment!

  • @gregnutt9918
    @gregnutt9918 9 місяців тому +3

    This the best instruction video, I have seen, yet

    • @zeemanknives
      @zeemanknives  8 місяців тому

      Thank you, appreciate the comment!

  • @Mark--Todd
    @Mark--Todd 9 місяців тому +14

    Absolutely 1st class. 48k views and only 1,2k likes seems somewhat rude to me given the quality of this video

    • @zeemanknives
      @zeemanknives  8 місяців тому +1

      Thank you for the compliment. I try to produce decent quality...and am thankful for the views I get. Not sure how to bump it up though. Oh well, time will tell I suppose.

  • @Narahari-nt7uc
    @Narahari-nt7uc Рік тому +5

    Отличные видео. Без лишней информации и заумных слов. Все по делу. Первый свой нож делал подсматривая этапы создания ножа у вас.

    • @zeemanknives
      @zeemanknives  Рік тому

      Спасибо за добрые слова. Всегда приятно слышать, что мои видео помогают другим создать свой первый нож.

  • @Alan-db7yh
    @Alan-db7yh 21 день тому +1

    A great how to make a knife with just hand tools. I like your file jig Thank you

  • @omphemetsematshidiso4984
    @omphemetsematshidiso4984 Місяць тому +3

    Amazing vid brother. Straight to the point.

  • @TheGarner77
    @TheGarner77 Рік тому +2

    Always something to learn, we often take for granted the technologies we have.... South Africa on the other hand, look our power away due to "Load shedding" we just have to adapt.
    Thanks for awesome content sir.

    • @zeemanknives
      @zeemanknives  10 місяців тому +1

      Yes, loadshedding its part of our reality. Gotta learn to use those hand tools!

  • @BeardieFPV
    @BeardieFPV 2 місяці тому +1

    Excellent video! Ive been wanting to get started in forging and knife making and this video tipped me over the edge. Thank you!

  • @tamimamini7446
    @tamimamini7446 Рік тому +7

    Your videos are very informative and easy to follow. Keep up the good work and inspire everyone else just like you inspired me.

    • @zeemanknives
      @zeemanknives  10 місяців тому

      Glad to hear that! Happy knifemaking!

  • @borneo4x4
    @borneo4x4 4 місяці тому +2

    Thanks for the video. I started watching about 3 weeks ago and now I've made 5 knives with basic tools including an angle grinder. I'm eyeing a belt sander now.

    • @zeemanknives
      @zeemanknives  4 місяці тому

      Well done! 5 knives in 3 weeks...thats an impressive count. Glad to help!

  • @DougieNMySnuggy
    @DougieNMySnuggy 9 місяців тому +12

    i have the cheap HF 1x30 belt grinder. I've modified it to be more suitable for my knives. I've learned how to freehand bevels with it. I can make a decent looking knife with the crappy belt grinder. HOWEVER, knife making is therapeutic for me. And there's nothing more therapeutic than putting on some tunes, zoning out the rest of the world, and hand filing bevels.

    • @zeemanknives
      @zeemanknives  8 місяців тому +4

      Yes that is true...hand filing, and hand sanding tends to leave you to your thoughts. And, you learn to use the tools you have at hand. I remember when I first got my 2x72 belt grinder, I thought to myself now I am going to produce knives at a lightning pace, only to very quickly realize that freehand grinding is a skill that needs to learned, and no machine regardless of quality will teach you how to do that...it's still something that I sometimes don't get right....hand files on the other hand...you cannot go wrong with it...:)

  • @Trav261
    @Trav261 11 місяців тому +1

    I really enjoyed watching this, you made it look so easy and the instructions are very easy to follow. thank you! 🙂

    • @zeemanknives
      @zeemanknives  10 місяців тому +1

      Thank you for watching, glad you like it. Its a practice thing...do it over and over again and it becomes easy.

  • @billhayward1585
    @billhayward1585 10 місяців тому +1

    Great Video. Very easy to follow. I'm slowly building up my confidence to give knife making a try. Thank you.

    • @zeemanknives
      @zeemanknives  8 місяців тому

      Thank you, appreciate the comment! Build one knife, no matter what the end result might be...you will learn alot from it. Then move to the second...

  • @tiagobrasil5910
    @tiagobrasil5910 10 місяців тому +1

    Excellent video and excellent teaching. What a wonderful knife. God bless you. Thank you very much.

    • @zeemanknives
      @zeemanknives  8 місяців тому

      Thank you, appreciate the comment!

  • @mikemolina949
    @mikemolina949 Рік тому +3

    Always a pleasure watching your videos! Please keep making more like this ! Very inspiring and very Informative! Thank you for the content

    • @zeemanknives
      @zeemanknives  Рік тому

      Thank you for taking the time to watch my content. I really appreciate that! Glad you find it useful! Keep well!

  • @JohnDoe-df2zz
    @JohnDoe-df2zz 5 місяців тому +2

    Very informative for anyone who wants to try making a knife without buying equipment.

  • @rayellgeral9065
    @rayellgeral9065 Рік тому +2

    Great video Henk, thanks for the effort!!!

    • @zeemanknives
      @zeemanknives  Рік тому

      Thank you Ray, I appreciate the support!

  • @ashishsawant6403
    @ashishsawant6403 Рік тому +1

    Nice informative video. Thanks !! Love from India 👍

  • @Cptnbond
    @Cptnbond Рік тому +3

    Amazing episode, and perfectly easy to follow along. Thanks for sharing. Cheers.

    • @zeemanknives
      @zeemanknives  10 місяців тому

      My pleasure, thank you for watching!

  • @geneclayton2467
    @geneclayton2467 5 місяців тому +3

    Great video, makes me actually want to try this. Thanks

  • @paulmendolia8483
    @paulmendolia8483 8 місяців тому +1

    One of the most complete instructional videos I have ever seen and I have seen hundreds. At least you dont have that awful head banging music in the background. Excellent.

    • @zeemanknives
      @zeemanknives  8 місяців тому +1

      Thank you, appreciate the feedback! Glad you enjoyed it! Regards

  • @hdpei3502
    @hdpei3502 Рік тому

    My favorite channel, I have learned a lot from it, and I look forward to more updates.

    • @zeemanknives
      @zeemanknives  10 місяців тому

      Thank you, I enjoy comments like these. Glad you like my content!

  • @TexasPatriot79
    @TexasPatriot79 Рік тому +2

    I bought a cheap belt grinder and I really struggle with grinding the blades..but I tried your file and eye-bolt method. Even though it takes FOREVER, it produces the BEST grinds ever! Thank you for the inspiration!

    • @zeemanknives
      @zeemanknives  Рік тому

      Try combining the two. Take off the bulk of the metal with the grinder, then finish on the filing jig. Free hand grinding takes alot of practice, and depending on the blade shape can be very frustrating to get right. I also dont always get it right...and I hate wasting material because of messed up grinds.

  • @jasonwood7340
    @jasonwood7340 4 місяці тому

    When quenching if you dunk in an up and down motion it will help keep the blade from warping. Great video, it's nice to see someone using hand tools :)

  • @NMWanderings
    @NMWanderings 3 місяці тому

    One of the best knife making videos I have ever seen! I may use your pattern, but try making it out of an old file instead (using a grinder, not files, obviously). This will be the first knife I have made in 50+ years.

    • @zeemanknives
      @zeemanknives  3 місяці тому

      Welcome back to knivemaking. This pattern will work nicely with an old file, and it is not a complicated design, so perfect for getting back into knifemaking! Thank you for the comment!

  • @THErickuss
    @THErickuss 3 місяці тому +1

    This makes me want to go to Walmart

  • @Strohann501
    @Strohann501 7 місяців тому

    Great video!! Everything super detailed, very good explanation about why you do what you do. Helps a lot!

    • @zeemanknives
      @zeemanknives  6 місяців тому

      Glad you found it useful. Keep well!

  • @snakeplissken3061
    @snakeplissken3061 Рік тому

    Sometimes the simple processes are best. Excellent video and great looking knife. Well done, sir.

    • @zeemanknives
      @zeemanknives  10 місяців тому

      I agree...you cannot go wring with the basics. Thank you for watching!

  • @jonathang.5092
    @jonathang.5092 10 місяців тому

    Fantastic craftsmanship. I really learned a lot from this. I've made about 5 knives now, but nothing as nice as this.

    • @zeemanknives
      @zeemanknives  8 місяців тому

      Thank you for watching. Keep on making knives...you see an improvement with everyone you make.

  • @WorkerDroid
    @WorkerDroid Рік тому

    Beautiful knife. Straight to the action for every step. Very inspiring for the average guy to try and do as well. Great job on the video and the knife. Thank you and congratulations..

    • @zeemanknives
      @zeemanknives  10 місяців тому

      Thank you! Happy you find it usefull!

  • @nathanaelcole7102
    @nathanaelcole7102 Рік тому

    Great video! I really appreciate the simplicity of your process, jigs, and fixtures...thank you!

    • @zeemanknives
      @zeemanknives  10 місяців тому

      Thank you. Yes, that is the point I am trying to bring across. You need need expensive machines to make a knife.

  • @patrick6087
    @patrick6087 5 місяців тому

    You’re quite talented. Thanks for sharing such a timeless practice of craftsmanship.

    • @zeemanknives
      @zeemanknives  5 місяців тому

      Thenk you for the conpliment. It is only my pleasure to share it with you.

  • @jmunsamy
    @jmunsamy Рік тому +1

    Great detailed content, highly appreciated.
    Would like a video about your background and how you got into the hobby.
    Also if you could share who you look up to or others in trade that currently inspire you.

    • @zeemanknives
      @zeemanknives  Рік тому +2

      Thank you for watching. I am a bit camera shy, but it is something worth looking into to. The audience can let me know what questions I need to answer for them.

  • @toddhatten354
    @toddhatten354 5 місяців тому

    Excellent video. Very informative and easy to follow. Thank you for this.

  • @addappt
    @addappt 7 місяців тому

    Beautiful process and great video to watch. True craftsmanship and attention to detail. Great work.

    • @zeemanknives
      @zeemanknives  6 місяців тому

      Thank you. I appreciate the comment.

  • @mikenorris6769
    @mikenorris6769 Рік тому +1

    Your videos are very good, I am making all my knives pretty much by hand, I first used large circular saw blades from sawmill but now I' trying 1084. I can't believe how much easier it is to work with! I have been trying to file my plunge lines with round file but they never seem to come out that great, I will keep trying though, I'm sure I will get it! eventually!

    • @zeemanknives
      @zeemanknives  Рік тому

      It is a practice thing...just keep trying, and you will get it. Do you use a file guide clamp? If not spend the time and make yourself one, or you get commercially available ones but it tends to be very expensive. That simplifies getting your plunge lines symmetrical on both sides. Grab a piece of mild steel flat bar and spend a day just filing in plunge lines to get a feel for it.

    • @mikenorris6769
      @mikenorris6769 Рік тому

      @zeemanknives That's very helpful, I have actually made a file guide clamp so will do do exactly as you say and practice on some scrap steel until I master it,cheers

    • @thorwaldjohanson2526
      @thorwaldjohanson2526 10 місяців тому

      Saw blades will have a heat treat, while 1084 or any steel stock for that matter is annealed. This makes it MUCH easier to work with. Annealed steal is like 5-20 hrc, while heat treated steel is usually 50-68 hrc.

    • @mikenorris6769
      @mikenorris6769 8 місяців тому +1

      @@thorwaldjohanson2526 That's great information, thanks, (I only just saw your message!)

    • @thorwaldjohanson2526
      @thorwaldjohanson2526 8 місяців тому

      @@mikenorris6769 you can also anneal hardened steel yourself, make the knife and then heat treat it again.

  • @mikenorris6769
    @mikenorris6769 9 місяців тому +1

    That is a great video, I value your tutorials and learn so much from them! Could you please tell me what thickness (in metric) you like to leave on knife edge when doing bevels? Also, should I start process with coarse file for quicker removal then switch to a second cut file to finish, or, do you use same file for whole process, Thanks

    • @zeemanknives
      @zeemanknives  8 місяців тому

      Thank you for the comment. I try to get the edge to about 1mm before I heat treat. I used to start with a coarse file but I found that the deep file marks are very hard to remove...so nowadays I do everything with a medium cut file. The time "saved" by using coarse file is not really worth the time hand sanding afterwards.

  • @Tromps04
    @Tromps04 Рік тому

    Awesome tutorial as always and your video transitions are top notch!

    • @zeemanknives
      @zeemanknives  10 місяців тому

      Thank you. Well, I try to make it as seamless as possible.

  • @DanHelfond
    @DanHelfond Рік тому

    Thank you for this. It was clear, concise, and exceptionally informative. Very well done!

    • @zeemanknives
      @zeemanknives  10 місяців тому

      Thank you! Glad you like it!

  • @abumamun2503
    @abumamun2503 11 місяців тому

    You Very Good Engineer

  • @pawekozielski2422
    @pawekozielski2422 Рік тому

    When hardening in carbon, I would use a steel section with a rectangular cross-section. Once warmed up, I would insert the blank. This is how I would create a hardening chamber. The color of the shape allows you to additionally assess the temperature. This also reduces the risk of steel burning. I wouldn't delay letting go either. During this time, the steel consolidates its crystalline structure. Immediately after hardening, just to be on the safe side, I would place the blank between 2 flat bars and squeeze it until it cools down. The blank is plastic for about 2 minutes after hardening. This would correct the curvature. Any stress before tempering causes the risk of the blank breaking

  • @laca8612
    @laca8612 Рік тому

    Really Thank you for your video. It was spot on and well created, good explanation! :)

    • @zeemanknives
      @zeemanknives  10 місяців тому

      Thank you. Glad you enjoyed it!

  • @KenMoss-music
    @KenMoss-music Місяць тому

    Great job..thanks for making this video.

  • @kiwich66
    @kiwich66 Рік тому

    Great video. You make it look so easy, and the result is amazing. Very motivating. Thanks!

    • @zeemanknives
      @zeemanknives  10 місяців тому

      Thank you for watching. Glad you liked it!

  • @amitbhattachariya9357
    @amitbhattachariya9357 11 місяців тому

    You are very innovative.

  • @edharker5775
    @edharker5775 Рік тому

    Stunning results as usual

  • @EdGolding-h6k
    @EdGolding-h6k Рік тому

    Great Video ! I am also using 1084 and struggling with plunge lines. I agree that the 1084 is forgiving and easier to work with. Two thingsI found helpful from this video is using an oil while sanding the the use of the correct round file with a file guide. Henk has been so helpful in answering questions while I make my first knife. I need to hurry up and get one done, he has asked me twice to see a finished knife. Thanks for the inspiration and encouragement.

    • @zeemanknives
      @zeemanknives  10 місяців тому

      Its a practice thing. Take a piece of scrap steel and just file plunge lines. You will get it right.

  • @kennethomeara9848
    @kennethomeara9848 4 місяці тому

    Beautiful work. Thank you

  • @SuperPanzer01
    @SuperPanzer01 Місяць тому

    Great Video Thank you

  • @Roger21989
    @Roger21989 7 місяців тому

    Great tutorial, well done!

    • @zeemanknives
      @zeemanknives  6 місяців тому

      Thank you. Appreciate you watching!

  • @mikafoxx2717
    @mikafoxx2717 2 місяці тому

    Best tip is to start with thin stock. Nothing worse than grinding edge bevels in really thick steel. Remember, thinness is sharpness. Starting with 1mm steel will give you a much sharper knife for kitchen use or such, even if you don't get perfect bevels it'll be thin enough to not get in the way.
    Knives dont need to be as thick as you think, given you get the heat treatment right! Toughness matters a lot on heat treatment quality, hardness is easy to get and almost irrelevant to its toughness. Heat the steel only until it's not magnetic and no further, then quench in water if you don't have parks 50, cooking oil won't harden 1060/75/80/84/95/W1 etc. only O1 or 52100 would harden well enough in home oils thanks to hardenability slowing additives, unless the knife is very thin already like I suggest, though you also need to be careful that it doesn't cool too much before quenching or it also won't harden fully. You can put it in your freezer immediately after quench for a slightly harder blade. Then temper it at 300-400f twice in a toaster oven with a cooling in between them. 300f for hard as possible, and 400f for tough as possible. Steel choice matters most for this, soft 1095 will never be as tough as fully hard 5160. That will give you the hardest, toughest combination possible from basic steels without a specialized heat treating kiln.

  • @davemcnair1569
    @davemcnair1569 10 місяців тому

    best explained vidio i have seen thank you

  • @MASI_forging
    @MASI_forging Рік тому

    Outstanding work. The knife looks cool.

  • @shaungill6992
    @shaungill6992 Рік тому

    Excellent mate thank you

  • @neilhaddifon3225
    @neilhaddifon3225 Рік тому +1

    Great video I really learned alot from it, thank you.

    • @zeemanknives
      @zeemanknives  Рік тому

      Thank you for watching. Glad you could learn from it!

  • @040cleaning6
    @040cleaning6 2 місяці тому

    Very well explained m8

  • @simonwoll
    @simonwoll 6 місяців тому

    Great video! Thank you so much for sharing! 🙏

    • @zeemanknives
      @zeemanknives  6 місяців тому +1

      Thank you. Glad you like it!

  • @tb8249
    @tb8249 6 місяців тому

    One of the best videos I have seen, explained in very detail, good work!!👌👍👌👍🔪🔪🔪🔪

    • @zeemanknives
      @zeemanknives  6 місяців тому

      Thank you. I appreciate the comment!

  • @eloylobatoneto
    @eloylobatoneto 9 місяців тому

    Show! Gostei desse novo modelo de vídeo narrado.

    • @zeemanknives
      @zeemanknives  8 місяців тому

      Thank you, appreciate the comment!

  • @cultivationplus6719
    @cultivationplus6719 10 місяців тому

    You can achieve the rounded transition in the bevel from the plunge by moving the belt slightly over the edge. However much over the edge the belt sits translates to how round of the plunge you get. Thats if your using a 2x72 that is

  • @DaveMcGill-o7z
    @DaveMcGill-o7z 3 місяці тому

    Very Very Informative ! Many Thanx for your expertise !

  • @lumberjack0101
    @lumberjack0101 2 місяці тому

    damn this is exactly what I’m looking for!

  • @JT-jg8le
    @JT-jg8le 27 днів тому

    Please list the style of files you used and the grits for each one. This information is most important. Thank you.

    • @zeemanknives
      @zeemanknives  26 днів тому

      I mostly use three types...a flat file to file the knife profile, the bevels, and to shape the handle scales, then a half round file to work finger choils and radiusses in your blade, then a round file for sharpening choils and plunge lines. For thick metal stock like 5mm, I would use a 10mm round file to file in the plunge lines, and for 3mm metal stock, a chainsaw sharpening file works well. I prefer a medium grit file as it removes metal quickly, but doesnt leave deep scratches like a basterd file. Fine files tend to clog up, and then also create nasty scratches in the metal which is a pain to clean up. Medium files, then 150 gritt sandpaper works for me.

  • @snell0710
    @snell0710 6 місяців тому

    Cool video I could totally do some small knives that way

    • @zeemanknives
      @zeemanknives  6 місяців тому

      Yes, this process works well with small knives.

  • @Jordy-v8b
    @Jordy-v8b 8 місяців тому

    Hello my friend, i like your vids. Question at minute 22:42 you are rounding your handles. Do you you use a half-round file are a regular rectangle bastert!!

    • @zeemanknives
      @zeemanknives  8 місяців тому

      Hi, i use a flat file on the handle, and a half round file in the rounded sections like the the finger choil and inside of the handle. I prefer medium cut files as bastard file can be aggresive and cause nasty scratches.

  • @radekbubienko6042
    @radekbubienko6042 Рік тому

    Thanks, very useful video. :)

    • @zeemanknives
      @zeemanknives  10 місяців тому

      Thank you! Glad you enjoyed it

  • @keithwarne9469
    @keithwarne9469 5 місяців тому

    Lekker vid boet baie dankie😊

  • @bbarker5766
    @bbarker5766 Рік тому

    Awesome simple design with nice crisp lines!!
    What is the sharpener that you used?

    • @zeemanknives
      @zeemanknives  Рік тому

      Thank you. That is a "Warthog Multi-edge" sharpener im using. Local product to South Africa.

  • @grantudemans6381
    @grantudemans6381 8 місяців тому

    Fantastic vid .. thanks

    • @zeemanknives
      @zeemanknives  6 місяців тому

      Thank you. Glad you liked it!

  • @hammertusk
    @hammertusk Рік тому

    Hi man nice video
    I don't know much about knife making but I liked the video
    For tempering, you want a orange hot, not white/yellow, not gray.
    The spine has to be dimmer than red because you want resistance not strength.
    Basically, do the opposite of 26:09.
    Anyways butterfly knife would be pre cool!!!!

    • @nickthompson529
      @nickthompson529 11 місяців тому

      I think you’re talking about hardening not tempering. If you heat the blade orange hot during tempering you will ruin the hardness of the blade.

    • @zeemanknives
      @zeemanknives  10 місяців тому

      I usually temper in a dark room to accurately judge the metal colours. It looks much different under a bright light. For the 10xx series and 5160 metals, critical temp is usually around a red colour. Still, always test with a magnet, and of course if you have a kiln with accurate temp sensors then you cannot go wrong.

    • @nickthompson529
      @nickthompson529 10 місяців тому

      Again I think you’re confusing tempering and heat treating.

    • @zeemanknives
      @zeemanknives  10 місяців тому

      @@nickthompson529 Yes you are right...wrong terminology from my side. I heat treat in a dark room to judge the colours of the steel, tempering happens in the kitchen oven.

  • @Eddy-Bryan
    @Eddy-Bryan 4 місяці тому

    Do you have a video or dimensions for your filing jig?

    • @zeemanknives
      @zeemanknives  4 місяці тому

      Send me a mail at zeemanknives@gmail.com and I can send you pictures.

  • @andreykotovsky
    @andreykotovsky 8 місяців тому

    I have a question, can you gring already hardened steel with a file? I mean if ill buy blank of a knife, is it possible to remove big amount of material from hardened steel?

    • @zeemanknives
      @zeemanknives  8 місяців тому

      Not with a hand file I'm afraid. You will blunt the file very quickly without much progress if the steel is hardened already. A belt grinder will be a better option in that regards, or you can anneal the blank and re-harden after filing.

    • @andreykotovsky
      @andreykotovsky 8 місяців тому

      @@zeemanknives ok, thanks for reply 🙂

  • @sergeykuvshinov6194
    @sergeykuvshinov6194 11 місяців тому

    Perfect!

  • @d-arts7139
    @d-arts7139 10 місяців тому

    very nice

  • @AlbertKnesal-e2q
    @AlbertKnesal-e2q 21 день тому

    I still remember vividly Pakistani men sitting on blankets in the market making copies of AK-47's with just hand tools, mostly files.

  • @gaylecoombs5510
    @gaylecoombs5510 4 місяці тому

    Do you have a video on your channel on your file guide setup your using?

    • @zeemanknives
      @zeemanknives  4 місяці тому +1

      @@gaylecoombs5510 no i dont unfortunatly, but drop me a mail at zeemanknives@gmail.com and ill send you pics

    • @gaylecoombs5510
      @gaylecoombs5510 4 місяці тому

      @@zeemanknives thank you

  • @peteremerson4150
    @peteremerson4150 11 місяців тому

    Nice !😀👍

  • @dardoheron5478
    @dardoheron5478 4 місяці тому

    tendria que estar en español x que me gustaria entender que esplica ya que pienzo que es muy importante gracias

  • @Sokol10
    @Sokol10 11 місяців тому

    Nice knife, but laborious making process. Well make video.

    • @zeemanknives
      @zeemanknives  8 місяців тому

      It is time consuming, but I find it rewarding. Thank you for watching!

  • @blacklight4460
    @blacklight4460 11 місяців тому

    Use cutting oil for drilling and sawing.

    • @zeemanknives
      @zeemanknives  10 місяців тому

      Thank you, yes it saves the drill bits from wearing out too quickly.

  • @harisbudiwicaksono6112
    @harisbudiwicaksono6112 Рік тому

    How do you make the line in the tip ?

  • @JohnDoe-sw4kg
    @JohnDoe-sw4kg Рік тому

    Man this was awesome. What was that sharpener you used?

    • @zeemanknives
      @zeemanknives  Рік тому

      Thank you. That is a Warthog Multi-edge sharpener. Local product to South Africa.

  • @tracykooken2606
    @tracykooken2606 6 місяців тому

    just out of curiosity what is the totak amount of time put into this ???? where did you get your metal . do work 'haeder' blade steel ?? and longer ??? a beauy of a true " hand " made knife !!!!❤

    • @zeemanknives
      @zeemanknives  6 місяців тому +1

      Its hard to keep track of the exact amount of time that I put into a knife, as I work on it over several days...but depending on the size of the knife it can be anywhere from 20 to 40 hours total time. I buy my steel from a local supplier in South Africa, @zeesknifesupplies. I always work with soft unhardened steel, and heat treat it to harden it. If you work with hand files then its difficult to work with hardened steel.

  • @Yunesko24
    @Yunesko24 11 місяців тому

    SUPER 👍👍👍 SUPER

  • @J.M.Bracero88
    @J.M.Bracero88 Рік тому

    It's not gonna look pretty? That knife looks gorgeous!

    • @zeemanknives
      @zeemanknives  10 місяців тому

      Thank you...well you know....its no showpiece, but very functional.

  • @abdolrezaakbari4090
    @abdolrezaakbari4090 5 місяців тому

    👌👌👌👌👌👌

  • @Semerich_Knives
    @Semerich_Knives 8 місяців тому

    Отлично 👍

  • @madeleineventer667
    @madeleineventer667 8 місяців тому

    Are Jo in Bloemfontein

    • @zeemanknives
      @zeemanknives  8 місяців тому

      No, Im based in Johannesburg.

  • @JoseMarquez-o9u
    @JoseMarquez-o9u 2 місяці тому

    está interesante, pero en español, por favor, gracias.

  • @MWard-zk4wg
    @MWard-zk4wg 11 місяців тому +1

    The flickering at the beginning hurts my eyes. Otherwise a most excellent video

    • @zeemanknives
      @zeemanknives  10 місяців тому

      Thank you for the feedback. I will tone it tone a bit in the future.

  • @thorhammer816
    @thorhammer816 Місяць тому

    Bei einem Messer ,ist die Klinge länger wie der Griff ,😊

  • @Dutcharmytent
    @Dutcharmytent 7 місяців тому

    I don’t have that much time to do what you did, it’s more cost effective just to buy a knife now.

    • @zeemanknives
      @zeemanknives  6 місяців тому

      I understand time is always an issue. And what you say is the truth. But I love doing this, so I make time....even 15 minutes a day adds up to a completed knife over a few days.

    • @mikafoxx2717
      @mikafoxx2717 2 місяці тому

      Perhaps, but most knives are poor quality compared to what you can make, unless you buy an expensive knife you will not get comparable quality to a good homemade knife.

  • @PaulTardino
    @PaulTardino 11 місяців тому

    Why peen the pins only to sand them flush with the scales? Doesn’t that defeat the purpose?

    • @zeemanknives
      @zeemanknives  11 місяців тому +1

      The metal pins expand slightly into the wood where you peen it, thats why you need to becareful not to peen it too much because you can crack the wood if the pins expand too much.

  • @maniac8246
    @maniac8246 Рік тому

    👍👏👏👏

  • @helmutgath2895
    @helmutgath2895 10 місяців тому

    Ich arbeite mit Maschinen um mir die Arbeit zu erleichtern und um Geld zu verdienen.😊

    • @zeemanknives
      @zeemanknives  8 місяців тому

      Yes, that is the goal of every knifemaker I suppose...however not everybody has access to machines, and in South Africa, we have no electricity during parts of the day...so, we have to learn to work without power tools. Thanks for watching! Regards

  • @NuritheTurk
    @NuritheTurk 11 місяців тому

    The strobbing light show may be dangerous to epileptic folks.

    • @zeemanknives
      @zeemanknives  10 місяців тому

      Thank you for the feedback...Ill tone it down in the future.

  • @user-ww4od4jl1f
    @user-ww4od4jl1f 3 місяці тому

    *"WARNING" - are you in California???*

    • @zeemanknives
      @zeemanknives  3 місяці тому

      No, not even in the US.

    • @user-ww4od4jl1f
      @user-ww4od4jl1f 3 місяці тому

      @@zeemanknives So why the hell are you warning about something that is obvious?

    • @user-ww4od4jl1f
      @user-ww4od4jl1f 3 місяці тому

      @@zeemanknives AFAIK only in California everything is dangerous. Other states are normal.

    • @zeemanknives
      @zeemanknives  3 місяці тому

      @@user-ww4od4jl1f i suppose the same reason as car manuals warning not to drink the battery contents...

    • @user-ww4od4jl1f
      @user-ww4od4jl1f 3 місяці тому

      @@zeemanknives *Never read car manual 😉I have never heard that it is forbidden to drink battery electrolyte!*

  • @DoubleKMustangs
    @DoubleKMustangs Місяць тому +1

    Fantastic video. Thank you.