I have been looking for an answer to one question and your video was the only one that answered it, and by example at that. Can star citizen support Throttle+C-Panel#1 + Alpha L&R? Yes and you showed how to setup the throttle and panel!!! Thank you so much.
GDI... Now I'm going to buy the panels. I wasn't planning on buying them... But they look so cool. Already. Bought the pedals, throttle and x2 constellation bundles.
How in GODS name did you get the button covers off for the label inserts? I read the manual, noting the little hole that you're supposed to insert a screwdriver head into that should cause it to pop off, but it makes the entire button pop off (clear cover and the plastic diffuser its attached to) instead.
can you make it so the led switches are working like a toggle button, at least led wise. for example on state in one press, off state on the next press?
Question on the picture the connectors are on the top of the base, while yours (and Virpils on control panel 2) are on the bottom for better cable management. Do you just take it apart? Does Virpil recommend this? As I don’t want to void my warranty when my panel comes! Thanks in advance
it dosent void your warranty, all you do is remove the top screws and rotate it around, all virpil products are designed to be tinkerd with and customized
Hello Turd Peterson. I have a question about buying from VIRPIL. I was on there site looking around and it looks like you have yo buy each piece individually and put it together yourself. Is that how it works?
yea pretty much you pick the kind of setup you want, example choose a base warbryd or the CM2 then choose a grip style you like, some people like center mounted stick with extensions, some people may already have monstertech mounts and may not wanh the virpil ones, some people like duel grips ( HOSAS ) other like me like grip + throttle ( HOTAS ) so yea you pick the the parts that fit your style here is the parts list i went with for my setup VPC Control Panel - #1 VPC Control Panel - #2 ( still on pre order ) VPC Desk Mount Adapter - Control Panel VPC MongoosT-50CM3 Throttle VPC Desk Mount V3 - L VPC Desk Mount V3 - S x2 VPC MongoosT-50CM2 Base VPC Desk Mount V2/V3 Adapter - MT-50 Throttle x2 VPC MongoosT-50CM2 Grip VPC WarBRD Rudder Pedals
virpil sells the bracket for this type of mounting its a kit that gives a couple of options virpil-controls.eu/vpc-desk-mount-v2-v3-adapter-control-panel.html
yes and no, its very limited , you cant have each button change, but you can havea action to where all the buttons change color togther, for example one time i set it up to where if i press self destruct all the leds would change from white to red
@@turdpeterson73 interesting i think there needs to be a good tutorial video with all the possibilities for the led stuff.... i spent 2h today to set something somehow. hope virpil brings some software updates because it shouldn't be hard to change button colors for a key confirmation :/
@@turdpeterson73 Coincidentally, I just sent in a support ticket to Virpil if it would be possible to have individual lights illuminate when the button is pressed.
@@PeteV80 yea they should make it more clear, that info is burried in there forums, buts its good quailty stuff and worth the wait, just try to get everything you need first go as shipping is really high
Thank you! There's not too much on UA-cam about Panel 1, so you're helping me a lot. And I agree--excited about what Panel 2 will have on it!
Love these "to the point" videos. Thanks!
no i want to spend 15 minutes on opening the box and the guy talking about his decisions to buy
I have been looking for an answer to one question and your video was the only one that answered it, and by example at that. Can star citizen support Throttle+C-Panel#1 + Alpha L&R? Yes and you showed how to setup the throttle and panel!!! Thank you so much.
Great video, thanks for the tips! I want to pick up the new panel after watching this.
Glad it was helpful!
GDI... Now I'm going to buy the panels. I wasn't planning on buying them... But they look so cool.
Already. Bought the pedals, throttle and x2 constellation bundles.
Thanks for sharing this video with us.
Your voice/opinion on this is also appreciated
How in GODS name did you get the button covers off for the label inserts? I read the manual, noting the little hole that you're supposed to insert a screwdriver head into that should cause it to pop off, but it makes the entire button pop off (clear cover and the plastic diffuser its attached to) instead.
Hello. What size mount that is holding the throttle and one of the panel? Is it the small or the large?
large
My boi is a citizen of the stars
can you make it so the led switches are working like a toggle button, at least led wise. for example on state in one press, off state on the next press?
Nice! What kind of detent attachment are you using on your CM2 throttle btw?
i dont have the CM2 anymore i sold it and bought the CM3 with built in detents, that was a 3d printed one for the cm2 but it didnt work very well
How did you remove the clearplastic caps from the white part without damaging it?
Question on the picture the connectors are on the top of the base, while yours (and Virpils on control panel 2) are on the bottom for better cable management. Do you just take it apart? Does Virpil recommend this? As I don’t want to void my warranty when my panel comes! Thanks in advance
it dosent void your warranty, all you do is remove the top screws and rotate it around, all virpil products are designed to be tinkerd with and customized
@@turdpeterson73 thank you! Much appreciated
@@XxTRUEPINOYxX14 could have watched the video since it was in it.
Turd from Mudspike?
What VPC desk mount are you using?
I have two of the medium mounts from virpil
Hello Turd Peterson. I have a question about buying from VIRPIL. I was on there site looking around and it looks like you have yo buy each piece individually and put it together yourself. Is that how it works?
yea pretty much you pick the kind of setup you want, example choose a base warbryd or the CM2 then choose a grip style you like, some people like center mounted stick with extensions, some people may already have monstertech mounts and may not wanh the virpil ones, some people like duel grips ( HOSAS ) other like me like grip + throttle ( HOTAS ) so yea you pick the the parts that fit your style
here is the parts list i went with for my setup
VPC Control Panel - #1
VPC Control Panel - #2 ( still on pre order )
VPC Desk Mount Adapter - Control Panel
VPC MongoosT-50CM3 Throttle
VPC Desk Mount V3 - L
VPC Desk Mount V3 - S x2
VPC MongoosT-50CM2 Base
VPC Desk Mount V2/V3 Adapter - MT-50 Throttle x2
VPC MongoosT-50CM2 Grip
VPC WarBRD Rudder Pedals
@@turdpeterson73 Thank you for the information.
what mount did u use for ur keyboard
hi can you show how you install the control panel on this deskholder from behind...a picture or something will be enough for me thx
Yea i will get something for ya
i.imgur.com/2T3Tob8.jpg
i.imgur.com/dIKcZ7Y.jpg
virpil sells the bracket for this type of mounting its a kit that gives a couple of options virpil-controls.eu/vpc-desk-mount-v2-v3-adapter-control-panel.html
short question can you change this led buttons to toggle the color after a push ?
yes and no, its very limited , you cant have each button change, but you can havea action to where all the buttons change color togther, for example one time i set it up to where if i press self destruct all the leds would change from white to red
here is a example video ua-cam.com/video/k9LJGrRKlUw/v-deo.html
@@turdpeterson73 interesting i think there needs to be a good tutorial video with all the possibilities for the led stuff.... i spent 2h today to set something somehow. hope virpil brings some software updates because it shouldn't be hard to change button colors for a key confirmation :/
@@turdpeterson73 Coincidentally, I just sent in a support ticket to Virpil if it would be possible to have individual lights illuminate when the button is pressed.
@@jcjammer8972 kewl
When will the #2 be out ? thanks in advance for anything you know.
no idea but it does show up in the latest drivers so soon i hope
how did you install the stickers under the caps?
the caps are snap on, you jsut pop them apart
nice, nice. how much it cost you, the whole setup?
i think it was around $1800 when factor in shiping and everything
@@turdpeterson73 the whole thing, minus the pc? That’s not too bad!
@@steffNn that's just for virpil stuff, got about $3000 in the pc
Makes sense. Nice stuff!!
@@steffNn im sorry i jsut pulled my reciets for the virpil total was $1496, forgot i cancled one order
Wait is your name actually turd?
lol, no
Lower the gain or set a noise gate on your microphone please, it's picking up all of your throat noises. It's quite distracting.
Never in stock
and never will be, virpil builds to the order, you pre order everything, then they build it, it usly takes 4 to 6 weeks
@@turdpeterson73 i didn't know that thanks
@@PeteV80 yea they should make it more clear, that info is burried in there forums, buts its good quailty stuff and worth the wait, just try to get everything you need first go as shipping is really high