Why This RTX 3090 Isn't Working
Вставка
- Опубліковано 26 сер 2024
- Discover the intricacies of GPU repair in our latest video featuring the restoration of a Palit GameRock RTX 3090, initially reported as 'Not Detected.' Delving into the card's internals, we encountered a formidable challenge-a short on the 5V rail.
Despite resolving the short, the absence of the 5V rail persisted, leading us on a diagnostic journey. Our investigation revealed a critical issue: a broken inductor responsible for delivering the necessary power. With precision and expertise, we replaced the faulty inductor, restoring functionality to the card.
Witness the meticulous repair process unfold as we navigate through obstacles and triumph over adversity. Subscribe, like, and share to stay informed on the latest in GPU repairs, and join us in the pursuit of hardware restoration.
Support me on Patreon: patreon.com/GraphicsCardRepairs
You Can Book Your Repair At : graphicscardre...
🔴 Don't miss our latest repair videos! Subscribe for more: / @graphicscardrepairs-t...
🔴 Support My Other Channel
/ @pixel_playground
👁️🗨️ Must-Watch Videos:
GPU Reballing: • Master The Art of GPU ...
Memory Chip Reballing: • Master The Art of Memo...
How to Repair Broken Memory Pads: • The Hidden Art of Grap...
🔧 Other Related Graphics Card Repair Videos:
RTX 4090 Repair (Error Code 43): • PNY XLR8 RTX 4090 Repa...
RTX 3070 Repair (No Display): • MSI Ventus RTX 3070 GP...
RTX 3070 Repair (Not Detected): • MSI Ventus RTX 3070 No...
RTX 3060 Ti Repair (Not Detected): • Gigabyte RTX 3060 Ti N...
🌐 Connect with Us:
Website: graphicscardre...
Email: support@graphicscardrepairs.com
Facebook: www.facebook.c...
Instagram: / graphicscardrepairs
🔥 Tags: #PalitGameRockRTX3090 #GPURepair #gpusolutions
Another great job!
Thank you 😁. Glad you liked the video
Great job sir G
Thank you 😊
You are too good, are you able to share the test software that use use for vrams?
discord.gg/vam6YC8vwU
You can find on this discord channel
Very nice job. Thanks for sharing your knowledge.
Glad it was helpful! 😁
Are you from the USA, I have a graphic card that needs to be repaired.
I am in Dubai in the UAE.
why ju just dont desolder chip to see if short is gone. why need to inject?
Desoldering and soldering each chip would take time. Injecting voltage and checking under the thermal camera pin points the faulty component so I can just remove the one that is faulty. Especially when I have to run through many cards in a day. This card took me an hour and fifteen minutes to finish, if I had to take the components out one by one would have taken me a couple of days only to identify the fault.
Hello Fraser, I have a problem with a Gigabyte 2080 Super.
At over 80 FPS the card turns off with a black screen and the fans turn on full speed.
Since the card also got quite hot in Furmark, I replaced the thermal pads and now the card stays at around 65 degrees Celsius in Furmark.
Unfortunately the error remains, if the frame rate rises above 80 it goes back to black screen and the fans run at full speed. Windows is ok in the background.
Could it be a VRAm or rather the GPU?
I tested the VRAM with mats, no errors.
Do you have any tips for troubleshooting, how would you go about it?
Lg
If the card works when not under stress MATS will not show any errors. In this case you can try running NVMT and check if any errors show up. Now the error which you described is different. Black screen with fans spinning at full speed. Now it looks like something is cutting out power causing black screen. Do you have GPUz installed on your computer. If yes can you take a look at hot spot. What is the difference between GPU temp and hotspot. Should not be more than 15°C. I am assuming something is cutting power to the core but at this stage it is difficult to say. It could also be that thermal protection is kicking in cutting power and ramping fan speed. But this is just a theory. Can you check the temperature difference between hotspot and core and comment back.
@@GraphicsCardRepairs-tk7ql I have to correct myself, with Furmark the card runs stably at around 200FPs and 1920x1080 for hours, with Haeven VSync switched off (I only have a 60Hz monitor) there is a black screen after around 2 minutes and the fans turn up. The temperature of Core 63C and hotspot 74C is a difference of 11 degrees. At high FPS you can also hear a whirring or a coil whine.
These temps are decent. This is an interesting case. I have not come across something like this before. difficult to say at this point what could be causing the issue.
@@GraphicsCardRepairs-tk7ql Thanks for your help, so far I've always had defective memory or Mosfet. This graphics card is then put aside for now.
You sell gpu or no if u sell give us wepsite
No I only repair. I don't sell GPU
One should never learn repairs on a 3090 card. Buy extremely cheap broken cards and learn on them. After one learns the basics, they should but very cheap functioning cards and work on them, replacing functioning parts with new ones (not removing parts and soldering them back-I know what I'm saying). Only after they manage to not lose any card from 100, then they can start fixing cards for real.
😁. That same card came back with a new problem. Broken solder balls under memory. Reballed the same memory and the card is ready. I wonder what is going on.
@@GraphicsCardRepairs-tk7ql Hope is working fine.
Card is back to normal now .
Not only high end card is very complex, the PCB also is very thick. You need a very high flow hot air station even for removing single tiny smd resistor without damage tha parts and pad