3rd Gen 4Runner | Transfer Case Seal Replacement
Вставка
- Опубліковано 18 гру 2023
- This video will show you how to replace the front output shaft seal on a 3rd Gen 4Runner (1996-2002) transfer case. After 250K miles or more, these may begin to leak and its a fairly simple fix as long as you have a few basic tools and know-how. The process should be pretty much the same on the rear output shaft seal, but I'd encourage you to hop over to Timmy the Toolman's channel to get the specifics.
Parts:
Transfer Case Output Shaft Seal: 90312-23001
parts.camelbacktoyota.com/oem...
Main Transfer Case Output shaft seal: 90311-41012
parts.camelbacktoyota.com/oem...
Output shaft Nut: 90179-22016
parts.camelbacktoyota.com/oem...
I have the same leak. I started watching Tims and then came to your video. It will be a great help in fixing mine. Thanks! Then time to figure out where my front differential is leaking from haha
Glad I could help you out! Good luck!
Strong work !
Way to go paying homage to Tim and Sean….. excellence 👍🏼
Absolutely, those guys are fantastic and have helped me countless times working on my 4Runner!
Yeah man, I am holding out hope for a 4th gen, but they are some true OG’s
Your content is very good.
Does fluid come out when you disconnect the shaft? Do you have to refill the fluid after?
Some fluid will likely come out and you should make sure it's topped off at the correct level when you are done. You can try parking so the vehicle is at an angle and that should minimize and leaking
@TheOutboundLane thank you so much. Your video was very helpful
Glad I could help! Let me know if you have any more questions
Your content needs SEO to reach viewers and subscribers.
why do people not want to show step by step. irritating
What part do you still have questions on. Happy to try to help