КОМЕНТАРІ •

  • @telugutradingstation
    @telugutradingstation Рік тому +1

    Our F&D mic (similar one as per your video) not working.. in the beginning it was working fine, but we stopped using it hence kept aside for almost 4 years now.. removed batteries and kept like that.. how to get it back in working condition. Orange/Reddish Light showing after inserting new batteries. FYI. Pls response with your any of the available video...

  • @ricalgen
    @ricalgen 2 роки тому +1

    How about changing the frequency of this microphone? It happens that i buy two pair of this i am having a problem with it due to the same frequencies. Can you please make a video with it?

    • @anydiything
      @anydiything 2 роки тому

      If you are having interference in mics then you can change frequency in the receiver of microphone. frequency changing method might differ in every microphone setup. Mic shown in this video was came with my F&D T60X home theater system. and the receiver was built inside the home theater.

  • @guillermoiturriaga7863
    @guillermoiturriaga7863 2 роки тому +1

    Say ANT in board.....this guy Is a Genius...!!!

  • @ItsWolfieDuh
    @ItsWolfieDuh 3 роки тому +1

    what if you made the wire longer, sealed the other end of the wire with some tape or silicone, then wrapped the wire around the circuit board and closed it back up? would that increase the range anymore? i must know

    • @anydiything
      @anydiything 3 роки тому

      I think it might work a bit, And it might not also. there are certain range of these rf signals. we can not increase it more than it is capable of. This little mod did work for me. In future I will try to increase the wire length to check if it works or not.. :)

    • @ItsWolfieDuh
      @ItsWolfieDuh 3 роки тому

      @@anydiything sounds good

    • @PapaRenz935
      @PapaRenz935 2 роки тому

      You can do calculations about how long the wire you're going to use. First know the working frequency of the microphone then calculate it.

  • @johnkennethtamayo5218
    @johnkennethtamayo5218 2 роки тому

    Good day po. How long the wire? And what type of wire you use. It is compatible in UHF wireless microphone?.Thank you. Keep safe

  • @hungry__sheep
    @hungry__sheep 4 роки тому

    You explain everything very well👍
    I like your tools 😇

  • @ivymusume
    @ivymusume Місяць тому +1

    Your location sir?

  • @micarifamily1
    @micarifamily1 3 роки тому +1

    I wish you revisited this i think you gan get alot more with a different way of wrapping. I did BT headphones with smaller wire but alot of laid down loops i dont know how to explain that part but can draw it...lol and ran it throughout the phones and got almost double, ok 1/4 about 6 to 10 more feet out of BT shit sorry about rambling but awesome video!

    • @anydiything
      @anydiything 3 роки тому

      Actually This mic used to work under very short range (less than it really should be), and after this mod the performance was noticeably better.

  • @rinaaltarejos2903
    @rinaaltarejos2903 27 днів тому

    Pano namn po kapag ang mic gumagana namn tapos kapag kumanta na tumitigil siya

  • @markanthonypinon9745
    @markanthonypinon9745 3 роки тому +1

    Sir natubig un battery maayos pb?

  • @farhanrijvi9169
    @farhanrijvi9169 2 роки тому

    Bro, I face difficulties on connect the wireless microphone of f&d t60x. When I put a new pair of battery every time the led signal appear red on it. What should I do?

  • @tommybergholm4622
    @tommybergholm4622 Рік тому +1

    Thanks but i thought it was about widening the freqency range..

  • @kingoquendo5297
    @kingoquendo5297 Рік тому +1

    Cool fingers 😎🤘

  • @markhonea2461
    @markhonea2461 Рік тому +1

    3 to 4 meters? Oh man I want to see you do better than that!! How about 1 kilometer?

  • @autoelectrician2009
    @autoelectrician2009 2 роки тому

    Receiver ki reng badhao