Worked after several attempts but i had to do the restart manually, by pulling the cord, for the error message to go away. Just in case someone has the same problem. Thanks for the great video.
Hi need help with my printer. i received it a couple years ago. and recently started using it. the display screen is off and i can see whats on the screen if i shove my face to it. is tehre a way i can switch it on? i been trying but i cant really find anything on the internet and came across your video. Thank you for your time
I used to like Samsung and have had the C1810W printer a long time. But have always had problems with it. The display is nearly impossible to read most of the time, it can't seem to stay connect to the Wi-Fi making me redownload it every month or so which takes hours because even using the Ethernet cord the PC can't seem to find it to reconnect the Wi-Fi. The controls are similar to yours but the upper button won 't bring up the menu. I usually use the PC menus since the controls are such a pain. I thought a hard reset would help but it won't let me do it. It insists I reset the time each time it's unplugged which is often because it starts up in the middle of the night waking up the whole house.
Hi everybody, despite tenth of attempts, I cannot enter the quoted Tech Menu following the steps clearly described above : Menu, Down, Left, Right, Ok, Stop/Clear, Ok, Menu, taking into account the fact that keyrs must be pressed without delay. My printer is a second hand one. Could I imagine this setup process could have been modified by previous user ?
Obrigado, fiz o procedimento e a impressora voltou a imprimir, mas agora tem a mensagem de "preparar toner", o ciano e magenta. As impressões só saem preto e amarelo. É algum problema no chip desses cartuchos.
We find everything ON THE NET EXCEPT for the most expensive part of the machine & which without this counter blocking works very well the transfer belt for c480w is there a chip on earth for this machine
Thank you. Very informative. My machine says I have a paper jam in Tray 1. Cant figure out what's going on. Will play around with the tech menu. Thanks.
Entering Tech mode• 4-in-1 Model (C480FN / C480FW)1) Press "Menu > # > 1 > 9 > 3 > 4" on the control panel continuously. 2) Press Menu.3) Select "Tech Mode". •3-in-1 Model (C480 / C480W)1) Press "Menu > Back > Left > Right > OK > Stop" on the control panel continuously
Thanks for the tutorials Please I have the same printer but my issue is not printing even after i changed the cartridge the printer is still saying cartridge not install Please can you help me out
Are you sure it is the exact same printer? If it doesn’t work, I cannot help you. I have had people with the same problem as you in the comment where they had problems getting into the menu. They entered the sequence a bit faster, and eventually it worked.
Hi, I have exactly the same printer as in the video. My message is "replace new imaging unit". All goes well until the printer answers clear counts/"clearing..." but after that it does not do any restart/initilizing system. Is it supposed to happen automaticly? I have tried do a start with the "start-"button and also tried pulling the plug. No difference. The same errormessage is stil remaining. Any suggestions?
I would try to remove all toners and stuff inside the printer, do the same thing unplug the machine, put everything back and then turn it on. It’s weird that it doesn’t reset.
Thanks for answer! Yes, and the system answered "Clearing..." when I choose "clearing counts / Imaging unit". I have now tried taking everything out and done it again. Tried with and without the Imaging unit inside... Same message; "Install new imaging unit".🙄@@mr_fix
@@user-oz9xe1gu4r ja dessa Samsung printrar. Svårt att säga vad mer du kan göra. Finns ganska många delar man kan plocka ur. Har du testat att nollställa flera punkter?
mi impresora samsung c460w no imprime a color y si tiene toner, se le cambio la cinta de transferencia porque manchaba mucho, ahora imprime pero no quiere a color, que puedo hacer?
@@hoglundh hey, in the meantime we got it to work again. We removed all cartridges and turned it off. Then we put them back in one after the other and each time turned it on, waited for the printer to recognize the cartridge and turned it off again. Then the next. At the end the printer accepted all four cartridges.
On trouve tout SUR LE NET SAUF pour la piece la plus chere de la machine & qui sans ce blocage de compteur marche tres bien la courroi de transfert pour c480w il y a t'il une puce sur terre pour cette machine
Mi problema es que no conecta con el dispositivo ya sea celular o laptop , lo demás está bien pues estuve imprimiendo pero en detección de impresora no quiere conectar .
When the status light on your Samsung printer is flashing orange and green, it typically indicates an error. The exact meaning can vary depending on the model of the printer and the specific error code associated with the flashing lights. It's advisable to consult the printer's manual or Samsung's support resources to identify the specific problem and find troubleshooting steps to resolve it.
Entering Tech mode• 4-in-1 Model (C480FN / C480FW)1) Press "Menu > # > 1 > 9 > 3 > 4" on the control panel continuously. 2) Press Menu.3) Select "Tech Mode". •3-in-1 Model (C480 / C480W)1) Press "Menu > Back > Left > Right > OK > Stop" on the control panel continuously
vous devez appuyer sur la combinaison de boutons plus rapidement que j'ai eu le même problème plusieurs fois. Si c'est la même imprimante, cela fonctionnera.
Worked after several attempts but i had to do the restart manually, by pulling the cord, for the error message to go away. Just in case someone has the same problem. Thanks for the great video.
Hi need help with my printer. i received it a couple years ago. and recently started using it. the display screen is off and i can see whats on the screen if i shove my face to it. is tehre a way i can switch it on? i been trying but i cant really find anything on the internet and came across your video. Thank you for your time
Thanks a lot. Worked for Imagery Unit message.
I used to like Samsung and have had the C1810W printer a long time. But have always had problems with it. The display is nearly impossible to read most of the time, it can't seem to stay connect to the Wi-Fi making me redownload it every month or so which takes hours because even using the Ethernet cord the PC can't seem to find it to reconnect the Wi-Fi.
The controls are similar to yours but the upper button won 't bring up the menu. I usually use the PC menus since the controls are such a pain. I thought a hard reset would help but it won't let me do it. It insists I reset the time each time it's unplugged which is often because it starts up in the middle of the night waking up the whole house.
the sequence
menu-down-left-right-ok-cancel-ok-menu
has to be done very fast to enter tech mode
Thank you - this fixed my issue with the new imaging unit!
Always nice with good news
Thanks man! First video that had a Passcode that worked on my M2070W that I got for free but had only 2000 pages left on the fuser and roller.
Thank you very much! It worked perfectly! 👏🏼👏🏼👏🏼
Thanks a lot, it worked !
Hi everybody,
despite tenth of attempts, I cannot enter the quoted Tech Menu following the steps clearly described above : Menu, Down, Left, Right, Ok, Stop/Clear, Ok, Menu, taking into account the fact that keyrs must be pressed without delay.
My printer is a second hand one. Could I imagine this setup process could have been modified by previous user ?
That is weird, are you sure it’s the exact same model?
Obrigado, fiz o procedimento e a impressora voltou a imprimir, mas agora tem a mensagem de "preparar toner", o ciano e magenta. As impressões só saem preto e amarelo. É algum problema no chip desses cartuchos.
Tente retirar tudo o que funciona, cartuchos coloridos e muito mais, e coloque-os de volta. Essas impressoras são muito estranhas.
We find everything ON THE NET EXCEPT for the most expensive part of the machine & which without this counter blocking works very well the transfer belt for c480w is there a chip on earth for this machine
Sorry still, don’t understand what you mean. Are you looking for physical part for the machine. What chip are you talking about?
si me sirvio el truco Presione "Menú > Atrás > Izquierda > Derecha > Aceptar > Detener" en el panel de control continuamente
1934
Thank you. Very informative. My machine says I have a paper jam in Tray 1. Cant figure out what's going on. Will play around with the tech menu. Thanks.
Open all the hatches in the back and the front (Pull out any visible paper)and then close them up again. This will probably solve your problem.
Firstly, pull out the paper tray and see if there is a paper stuck in there, just pull it out
Merci beaucoup pour le dépannage! Thanks a lot!
De rien! :-)
Dear Sir,
I follow the steps indicated at your video, but I can't get into the technical menu.
Xpress C480W printer
Error: replace transfer belt
Try to enter the sequence quicker. I had the same problem at first.
Entering Tech mode•
4-in-1 Model (C480FN / C480FW)1) Press "Menu > # > 1 > 9 > 3 > 4" on the control panel continuously.
2) Press Menu.3) Select "Tech Mode".
•3-in-1 Model (C480 / C480W)1)
Press "Menu > Back > Left > Right > OK > Stop" on the control panel continuously
you have to do it really fast I tried it almost 100 times but finally it works
the code "menu-down-left-right-ok-cancel-menu" worked for me and my c480w
Thanks a lot! It worked perfectly!
How to reset or disable Toner on Samsung xpress c1810w ?any idea please
Thanks for the tutorials
Please I have the same printer but my issue is not printing even after i changed the cartridge the printer is still saying cartridge not install
Please can you help me out
Try to pull them out and put them back again. Plus pull out the power cord wait for 10 seconds and plug it back to the wall socket.
@@mr_fix thanks I did that is still not picking
@@mr_fix I did that is still not OK please
Are you sure it is the exact same printer? If it doesn’t work, I cannot help you.
I have had people with the same problem as you in the comment where they had problems getting into the menu. They entered the sequence a bit faster, and eventually it worked.
If it is not the exact same printer it might not work. I am in no means any Samsung expert.
Hi! My Printer C480 doesn’t compatible the cartridges even though I tried to install them one by one multiple times. What should I do?
Really don’t know. Are they original brand cartridges? Have you removed the plastic from the cartridge head?
Hi,
I have exactly the same printer as in the video. My message is "replace new imaging unit".
All goes well until the printer answers clear counts/"clearing..." but after that it does not do any restart/initilizing system.
Is it supposed to happen automaticly? I have tried do a start with the "start-"button and also tried pulling the plug. No difference.
The same errormessage is stil remaining.
Any suggestions?
I would try to remove all toners and stuff inside the printer, do the same thing unplug the machine, put everything back and then turn it on. It’s weird that it doesn’t reset.
So you pressed the ok button in the centre of the circle?
Thanks for answer!
Yes, and the system answered "Clearing..." when I choose "clearing counts / Imaging unit".
I have now tried taking everything out and done it again. Tried with and without the Imaging unit inside...
Same message; "Install new imaging unit".🙄@@mr_fix
"Replace new imaging unit"
@@user-oz9xe1gu4r ja dessa Samsung printrar. Svårt att säga vad mer du kan göra. Finns ganska många delar man kan plocka ur. Har du testat att nollställa flera punkter?
Ours is stuck in the system initialize mode loop. Won't do anything unfortunately. Only turns on and off at power cord. No paper jam, weird.
mi impresora samsung c460w no imprime a color y si tiene toner, se le cambio la cinta de transferencia porque manchaba mucho, ahora imprime pero no quiere a color, que puedo hacer?
Great video, thank you so much!
Thanks 🙏🏻
Thanks very much !!
Tried this, didn't help. mine continuously complains about the cyan cartridge, although we exchanged it already...
I have the same problem.
@@hoglundh hey, in the meantime we got it to work again. We removed all cartridges and turned it off. Then we put them back in one after the other and each time turned it on, waited for the printer to recognize the cartridge and turned it off again. Then the next. At the end the printer accepted all four cartridges.
@@antonnurwald5700 Thanks. I'll give it a try.
On trouve tout SUR LE NET SAUF pour la piece la plus chere de la machine & qui sans ce blocage de compteur marche tres bien la courroi de transfert pour c480w il y a t'il une puce sur terre pour cette machine
Je ne comprends pas vraiment ce que tu veux dire. Le français est trop complexe
Mi problema es que no conecta con el dispositivo ya sea celular o laptop , lo demás está bien pues estuve imprimiendo pero en detección de impresora no quiere conectar .
A veces tengo el mismo problema. luego saco el cable de alimentación, espero 10 segundos, me conecto de nuevo y encontrará la conexión inalámbrica.
The copy of my printer samsung111s when i use photocopying is not good
Sorry can’t help you with that one unfortunately
Thank you.
You’re welcome
Hola tengo una Xpress C480W y no me sale esa secuencia qu epuedo hacer
A mí me pasó. La secuencia inicial
menu-down-left-right-ok-cancel-ok-menu
tiene que hacerse rapidísimo, si no, no entra a tech mode
After reseting belt i have error about fuser
Hi i cannot get in the tech menu
If you have the same printer try agent but faster
Not working on my C1810w
samsung680
Status light blickking orange and than green
When the status light on your Samsung printer is flashing orange and green, it typically indicates an error. The exact meaning can vary depending on the model of the printer and the specific error code associated with the flashing lights. It's advisable to consult the printer's manual or Samsung's support resources to identify the specific problem and find troubleshooting steps to resolve it.
didn't work for C480W, tried twice also fast
Try this
Entering Tech mode•
4-in-1 Model (C480FN / C480FW)1) Press "Menu > # > 1 > 9 > 3 > 4" on the control panel continuously.
2) Press Menu.3) Select "Tech Mode".
•3-in-1 Model (C480 / C480W)1)
Press "Menu > Back > Left > Right > OK > Stop" on the control panel continuously
it's not working
NE FONCTIONNE PAS IL N YA JAMAIS CE MESSAGE TECH MODE TECH MENU !!!
vous devez appuyer sur la combinaison de boutons plus rapidement que j'ai eu le même problème plusieurs fois. Si c'est la même imprimante, cela fonctionnera.