Huztl G366 First Start Holzfforma G366 Review, Farmertec G366 Unbox, MS361 Clone Stihl Clone

Поділитися
Вставка
  • Опубліковано 17 жов 2024

КОМЕНТАРІ • 43

  • @k9road
    @k9road 3 роки тому +1

    Hello, I would love to know, after all this time, would you buy this saw G366 again???? Thank you...stay safe

    • @bigjersobservations
      @bigjersobservations  2 роки тому +2

      Thank you for your question.
      No,. instead of the G366 clone of the stihl, I would probably by another clone of the huskey 372xp.

  • @JAWS1376
    @JAWS1376 4 роки тому +1

    Just want to say great, informative video. How's it been running? Tune ok?

    • @bigjersobservations
      @bigjersobservations  4 роки тому +2

      Thank you. Runs great, still breaking in rich. At the end of the first tank I cut a couple of cookies with video: ua-cam.com/video/ebZtGp3EQOU/v-deo.html Used it on a 65 footer with the 3rd tank and video: ua-cam.com/video/A1kdy6sXLZg/v-deo.html Saw stalled one time during return to idle after a cut. Will tune/tach in another couple tanks and post.

    • @bigjersobservations
      @bigjersobservations  4 роки тому +1

      Still running good. Fuel vent plugged around 10 gallons and i replaced it with a spare I had. I had to bend the chain side plate in a little.

  • @davidjanuszewski5020
    @davidjanuszewski5020 3 роки тому +1

    Useful presentation, you wear-well.

  • @markpowers349
    @markpowers349 4 роки тому +1

    How does the quality of the plastics feel to you?

    • @bigjersobservations
      @bigjersobservations  4 роки тому +1

      They are perfectly acceptable. The brake handle on this saw was cracked when it arrived, and the box showed signs that it was clearly damaged in shipping. The brake handle has held up just fine. I received the new handle and have not bothered yet to change to the new one. For the rest of the plastics; one day at about 25 degrees F, I pinched the blade, and was very rough with the saws handle and it did not crack or break. I do not know how it will perform in subzero temps.

    • @markpowers349
      @markpowers349 4 роки тому +1

      @@bigjersobservations Thank you for replying. I bought a johncutter and I've been really impressed with it. I was just having a hard time buying a blue chainsaw. I don't know why.

    • @bigjersobservations
      @bigjersobservations  4 роки тому +1

      ahyeah I think we know why. I have the same feeling, luckily they run good. Ha Ha

    • @bigjersobservations
      @bigjersobservations  4 роки тому +1

      I think they are fine. the only issue i saw is that "cheap homesteding" cracked the handle/gas tank in freezing weather when he got it stuck in a cut. They sent him a new one.

    • @markpowers349
      @markpowers349 4 роки тому +1

      @@bigjersobservations I ended up buying the joncutter 5800, and I've been very impressed. It's been a nice saw for around the house.

  • @grantjamrock3812
    @grantjamrock3812 4 роки тому +1

    How much does she weigh all assembled?

    • @bigjersobservations
      @bigjersobservations  3 роки тому +1

      Thank you for your question. The assembled saw fully wet (with oil and fuel) is 17.6lbs, or 7.98kg

  • @davs.1672
    @davs.1672 3 роки тому +1

    How was the shipping time?

    • @bigjersobservations
      @bigjersobservations  3 роки тому +1

      Thank you for your question. Sorry about the delay. Originally it was about 25 days. However, the last order I made took 33 days.

  • @ВалераК-ц2р
    @ВалераК-ц2р 3 роки тому +2

    Made in USA?

  • @jayjackson9386
    @jayjackson9386 4 роки тому +1

    Wher can I get one please

  • @robiaditya4454
    @robiaditya4454 4 роки тому +1

    Is Indonesia 🇮🇩 menoton 👍 good

  • @EcSsAwS
    @EcSsAwS 2 роки тому +1

    Oooooo
    People who put the chain brake on and then start it... Just makes me cringe
    That is absolutely hell on that needle bearing and clutch

    • @bigjersobservations
      @bigjersobservations  Рік тому +1

      Thank you for your comment

    • @Vipex_134
      @Vipex_134 Рік тому

      That's why i start on full choke until it "coughs" and then i put it in the run position.

  • @codymoff6008
    @codymoff6008 3 роки тому +1

    It is a direct copy of stihl owners manual

    • @bigjersobservations
      @bigjersobservations  3 роки тому +1

      Thank you for your comment. Agreed, that it looks like it is a copy machine copy of the Stihl manual.

  • @Сергей-й1й7ж
    @Сергей-й1й7ж 4 роки тому +1

    MS 361

  • @wilfordclement5611
    @wilfordclement5611 2 роки тому +1

    That's a bad habit to get into when you put on your chain brake, it should not even be bothered with,