AE86 sr5 to 4age Wiring How-to
Вставка
- Опубліковано 25 кві 2021
- Here's a basic overview of wiring a bigport 4age into an sr5 ae86. The only thing you need to get is an engine harness and the 14 pin chassis ecu plug. Essentially there are 5 or 6 wires that need to be ran from the 14 pin plug to the engine harness and power from the chassis. It was fairly straight forward, however it seemed daunting.
What is the harness that goes towards rear of car along door sill? Does it go to handbrake? Which model year?
I'm not sure what you're asking exactly. 🤔
Just to clarify, for the brown wire in the new 14pin connector, you just spliced that into the brown wire on the middle connector right? Did you do anything with the brown wire that came from the original connector at 16:30 where the other blue and yellow wires for the afm came from?
My afm seems to not be working it behaves the same when unplugged. It stumbles when I stab the throttle but revs fine if I go slowly.
Let me double check when I get some time.
There's a black/red wire that ends somewhere near the battery. Make sure that is getting 12v. Should have a connector on it of some sort. I was having the same issue and that ended up being the culprit.
@@leveledupgarage5303 Okay for sure man, I’ll check that too. I appreciate it
@@leveledupgarage5303 life saver man! It was the black and red wire by with the A* connector that powers the afm
@MrGorpstine awesome man. Glad that worked.
does your car not have the chassis side of the connector at 26:50? on mine it has a matching plug
also i can't seem to find any 14 pin connectors, any place you know i could find one?
No they hacked that plug out.
And you can get them from any 4age powered car. So mr2 or ae88 etc. I'd ask on some mr2 facebook pages
@@leveledupgarage5303 ok so now i've got the connector, my friend grabbed me one from a junkyard mr2, about to try wiring it in soon
@@leveledupgarage5303 thanks for the help!