2010 VW POLO CLUTCH REPLACEMENT 1.2 PETROL
Вставка
- Опубліковано 18 жов 2020
- Song - Millions Mashup 2
Singer - B Mohit
Director : Amman Singh
Music : D Soldierz
Editing : Neeraj Mehhta
Color Grading : Amman Singh
Cinematography : Neeraj Mehhta
Makeup : Danish Hanif
Choreographed - Robin Tanwar
Styled by - Harsh Khullar and Scorpion Scissors
Producer: Jatin Bhutani
Project : Jatin Bhutani
Online Promotion : Mediaone Network (+91-8800908841)
FOR ANY ENQUIRY OR SHOW BOOKINGS - +919811118265 , 9910646212
Special thanks to RK Bhutani & All the Singers
Add Me :
Snap id - mohitbhutani33
Instagram - / bmohit_offi. .
Facebook - / mohit.bhutan. .
Enjoy and Stay Connected With Us!!
Subscribe Our Official Channel For More Updates
DISCLAIMER: This Following Audio/Video is Strictly meant for Promotional Purpose.We Do not Wish to make any Commercial Use of this & Intended to Showcase the Creativity Of the Artist Involved.
The original Copyright(s) is (are) Solely owned by the Companies/Original-Artist(s)/Record-label(s).All the contents are intended to Showcase the creativity of theArtist involved and is strictly done for promotional purpose.
*DISCLAIMER: As per 3rd Section of Fair use guidelines Borrowing small bits of material from an original work is more likely to be considered fair use. Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for fair use
Music Provided by Rujay
Instrumental: "No Matter" by Mandalaz
Music provided by Rujay
Instrumental: "Paradise" by Mirov
Music Provide by Rujey
Instrumental: "I Know by" Young Gotti,
Channel: / rujaytv . - Авто та транспорт
Hi Thanks for video. I've got a golf mk5 1.9 tdi ( engine code BXE). Threw a conrod out of block recently. Any idea why this happens? I've read on the forums where it is recommended to replace with BKC engine. Not sure whether I should go for a remanufactured engine. Planning to do all the work myself. Any suggestions would be appreciated.
Thank you, you made car enthusiasts very proud .
Thanks for watching and all your support really appreciate it . Let's go TEAM R4UL
Great video you made it do simple thank you
Thanks for watching really appreciate it
Great video!! Can someone help me out? I have 2016 polo gt the gears keep slipping, if I put the car in 4th from 3rd it thinks it is still in 3rd. When I accelerate the dashboard lights up showing the car in 3rd gear even though it's in 4th. Do you reckon I need to replace the clutch??
There is shows abs light?
Hey! Thanks for the video it’s cleared up a lot, but is this the same process for an auto gearbox? Or is it different? I have a 1.2l 2010 Volkswagen polo, trans code MGV so I was wondering if it’s the same concept or if it’s different?
Thanks for watching really appreciate it. To be honest I don't do auto gearboxes so I dont know what's it like. But I think it's not the same
Hi what different ways to know when the clatch kit needs to be changed?
Hi thanks for watching. Few ways to tell.
If it starts slipping for example if the revs go up but car dosnt move too much.
When the car is off you can change gears easy but when you start the engine hard to change the gears
Theres more examples the 1st one is more common
Hi! Octavia 2014 2.0 liter TDI manual gearbox (6 speeds) running about 266000 km, the problem happened suddenly when the clutch pedal is sticking down, I need to raised it manually several time to engage the speeds. There is no leakage of fluid after the inspection.
I tried to bleed air from the system, it needs to move the pedal and press it about 40 times to have a normal feeling, but the liquid comes out full of air bubbles (almost white in colour) from the breather.
Is this a problem of the Pedal pump (Master cylinder)? or in the pump within the whole mechanics (Slave cylinder)? And could this happen for a breather problem? thank you
Hi thanks for watching really appreciate it. Does yours have a concentric slave cylinder if so could be that the one inside the gearbox. If it's on the outside try replacing that before you do anything.
Terrific video bro. I wonder how much you’d charge for this? Also, if my clutch feels weak or stiff or odd in any way should this signal a replacement
This job will normally cost around £300
If your clutch feels odd might not be the clutch itself, could be the cylinders
Nice one brother man, tell me something man on 1400 polo vivo clutch is not clutching after doing engine overhaul as well as clutch, it spongy and it doesn't seems to be building enough pressure to be applied to pressure plate in order to free clutch plate. There is no visible leaks and I replaced master cylinder as well because it seemed to had internal leak since it was building enough pressure but basically there isn't much difference even after changing master cylinder. Note that it was clutching before and it was driven to the workshop.
It must still have air in it. Or the clutch pressure plate is faulty
Hey my brothers is making a grinding noise when rev’d in neutral and can feel a vibrating through the clutch pedal, been told it could be the flywheel how can you tell if it’s the clutch or the flywheel, cant seem to find any flywheels on any online parts sites?
For the vibration on the clutch could be the clutch or flywheel. As for the nose when reving could be one of the pulleys or water pump
@@TEAMR4ULTV in neutral when you press the clutch the grinding noise goes away at the biting point then comes back when you lift off the clutch, been told it’s the clutch release bearing, that sound right?
@@rhysdurnion7175 yes that sounds right
Do you need to drain the gearbox oil before removing the diff output shaft ?
I dont remove the oil what ever comes out I just retop it up
Hi I have a polo mk5, 3cylinder 4 valve, when shit gears in low rpm , or hit gas and lose it immidiatyly the car is shocking espicaially in low rpm, it is getting worst, it this a clutch problem or something else?
Could be clutch. On the polo 3 cylinder they burn the valves out also could be the timing chain
is it the exact same for a 2011 polo 1.6 TDI?
Very similar
I have removed all the bell housing bolts but the gearbox is still stuck to engine. How do I seperate the two? I am working on vento 2011 diesel.
Maybe just stuck on the dowls, if you have taken all the bolts off just use a pry bar and pry it out
Bro is your clutch replacement done properly? How is it now. What extra tools have you used to do it? I am thinking to do it on my vento soon.
I changed clutch but it gives sound in morning when I start it and if I press clutch half it goes when I'll leave clutch it comes back but In morning when I start it after 1 minute sounds finish and while I'm driving I can't hear any sound again it's always do in a morning. When it's cold and if temperature is above then 15 degrees then there is no sound at all.
Has to be a faulty release bearing
Is it as easy on a 2011 Skoda Fabia 1.2 tsi?
Pretty much similar
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
👏👏👏👏
🤩
How many miles did that clutch last on that particular vehicle before it was changed?
It was less than 100k
@@TEAMR4ULTV probably been abused. I've got pretty much the same gearbox and it has lasted 135k.
@@nsoper19 165k 1.6tdi 140ps 300nm
Thanks bro!
Thanks for watching really appreciate it
How do I line the gearbox up to slide in to the engen
You need two people to be honest makes your life a lot easier. Once you have the clutch lined up it should just go in
@@TEAMR4ULTV i had 2 people and we have lifted the gearbox and it yust don't want to slide in to the pilot shaved
@@andrestrydom8362 did you driveshaft cap/different cap off
Also did you try the clutch plate o the input shaft in the gear box and last you have to make sure its lined up. One more thing if you are using a gear box lift try lowering it a little or lifting it a little hope you get it in.
Is the 1.2 TDI pretty much same to do or anymore difficult.. ??
I would say its nearly the same gearbox might be heavier but should be pretty much same
@@TEAMR4ULTV Cheers bud. :-)
tell me bro..cost of clutch plate for polo?
To buy the clutch about £100 to £120
How much oil in the gearbox?
They dont take too much about 2.5l
Or just keep Putting oil in untill it come out of the filler plug. But I'll be honest you need a special tool to put the oil in
I need your help
How can I help you
Is it possible to lose timing when replacing clutch kit for polo vivo, my car won’t start after the clutch kit job
Is it possible to lose timing when replacing clutch kit for polo vivo, my car won’t start after the clutch kit job
@@sivuyileanelengxwana7553 hi thanks for watching really appreciate it. Yes you can if its timing chain driven you need to hold the crank pully when tightening and taking the clutch off
VW says the car should be brought to their workshop, dismantle the gearbox, measure the shims and that's when they can get the right clutch kit. How true is this? Cause then this says i cannot just walk in to a store and buy a clutch kit
That's not true I got the clutch kit from local spare shop am in Manchester and used BMS Motorfactors
@@TEAMR4ULTV thanks bro