My chair won't go down. It goes up and holds and locks no problem but won't allow me to bring it down. And I do find oil released around the unit for a while. Any suggestions would be much appreciated.
what about a knocking noise while i have someone in my chair ? As i lift the chair it works but after a few minutes it starts to knock like really LOUD . What do i do for that ? please help.
If you have the brake locked, it could be the pump is leaking down. As the pump leaks down the brake tries to hold the chair up, but has to let go, thus the popping noise. Of course this is a guess from your information.
We've serviced pumps with loud knocking sounds in the past and had 50/50 success rate. You can try by pumping the lever about 30-40 times (continue after reaching maximum height) and releasing the pump immediately after. I would try this a few times...good luck!
Having issues I’ve replaced mine once I’ve had not even a year. Hard to swivel, makes noise… doesn’t pump up or go down smooth, the hydraulic fluid seems to be leaking out. It’s a pain to Change this out, any other solutions?
My new styling chair will not swivel unless I have my foot on the pedal all the way down then it moves, otherwise locked. Never had this with other chairs.
I've had my Collins chair 1yr. Johnny has sent me 4 pumps including the free base. He knows these are junk. He says humans make mistakes. I'm 2k into this nightmare. With my 7yr warranty I just keep having to change it out every 3 months. I would not recommend.
Hello @knowledgeispower, this certainly isn't a typical experience with our bases as we definitely wouldn't warranty them for 7.5 years if we thought they were not built to last. We have the longest warranty in the industry and we stand behind our products as you can see. We apologize for the inconvenience you've experienced and hope that you appreciate that we are and will continue to make sure you are taken care of. For best response time, it's always best practice to give us a call directly for warranty or support issues - 855.757.6877 - Thank you for your business.
Keep 'em coming please! Thank you! We have ALOT of your chairs :)
Thank you! If you feel we've missed a subject, please feel free to suggest a video. We're open to suggestions.
Got a leaky cylinder and need to know how to stop that leak. It was just a little leak but now it's really messy.
My chair won't go down. It goes up and holds and locks no problem but won't allow me to bring it down. And I do find oil released around the unit for a while. Any suggestions would be much appreciated.
The pump on one of my chairs won’t lift the chair do you have a video on how to fix it
Hello sir, I got quick question about my barber chair.. do you got time to answer? Thank you
What if keeps going down by itself? What would you recommend?
what about a knocking noise while i have someone in my chair ? As i lift the chair it works but after a few minutes it starts to knock like really LOUD . What do i do for that ? please help.
If you have the brake locked, it could be the pump is leaking down. As the pump leaks down the brake tries to hold the chair up, but has to let go, thus the popping noise. Of course this is a guess from your information.
You taking it up to high
We've serviced pumps with loud knocking sounds in the past and had 50/50 success rate. You can try by pumping the lever about 30-40 times (continue after reaching maximum height) and releasing the pump immediately after. I would try this a few times...good luck!
I’m having this same issue!
@@SaloncaEquipmentBeautySupply is there any other solutions beside this one ?? I
Wow this is the exact base of my barber chair! Thanks
Having issues I’ve replaced mine once I’ve had not even a year. Hard to swivel, makes noise… doesn’t pump up or go down smooth, the hydraulic fluid seems to be leaking out. It’s a pain to Change this out, any other solutions?
My pump won’t go up or down anymore and also it won’t spin any suggestions ?
I bought a second hand chair and it leans to one side. Can you help me
thank you but the gas shock is not moving .. how do i fix this ..
How can I lock my barber chair to keep it from spinning.
I have a old Koken chair
how do u fix a chair where when u turning it around its uneven its not leveled
I need to change the hidrolik fluid. How much i need to put in to the pump
I have a old Belmont Takata that the hydro licks leak can I get a seal kit from you or possible repair the model number is 10-29400
what can I do to make my chair go lower ? I'm 5'2 sometimes it's hard to reach.
My new styling chair will not swivel unless I have my foot on the pedal all the way down then it moves, otherwise locked. Never had this with other chairs.
How do i remove the pole thats inside the hydraulic system
This would require complete disassembly of the pump. We do not cover this procedure as it should only be done is a qualified hydraulic shop. Johnny
Hola que puedo hacer con mi silla de barbería que se baja sola..como puedo solucionar el problema
If my chair seems to work ok, but I've never added oil - >5 years old, should I be adding oil?
You guys don't happen to have instructions on topping off the hydraulic fluid? All the pumps seemed to have leaked in shipping to me.
Probably not leaked, just residual oil from manufacturing. They can be filled, but not recommended. Call factory for more info. 800.292.6450
What kind of grease do you use on the top of the pump or stem that goes into the bottom of the seat?
Camp, We have a "Maintenance" video that discusses this. We recommend any light oil or 3N1.
Can u put a chair on any hydraulic pump, ( taking it off the pump and putting on a different pump system, different brand)
no, almost never fits, call the factory. We do have options. Johnny
I need to replace the pump on my wife chair but not sure what kind it is, cant find a name on it
How to open the pump
usually two to three nuts on top casting. Call factory for more info. 800.292.6450 (applies to Collins pumps)
Link to the oil
www.3inone.com
@@johnnychaffin307 thank u, wear do u put the oil for the recline
You cannot add oil to the reclining gas spring! it is sealed under high pressure. (this applies to Collins chairs)
@@johnnychaffin307 can u help me, my chair when reclines squeeks and is kinda stiff
Again, depends on the type of recline. What brand of chair?
I've had my Collins chair 1yr. Johnny has sent me 4 pumps including the free base. He knows these are junk. He says humans make mistakes. I'm 2k into this nightmare. With my 7yr warranty I just keep having to change it out every 3 months. I would not recommend.
It's knocks and slowly drops your customer to the floor
Hello @knowledgeispower, this certainly isn't a typical experience with our bases as we definitely wouldn't warranty them for 7.5 years if we thought they were not built to last. We have the longest warranty in the industry and we stand behind our products as you can see. We apologize for the inconvenience you've experienced and hope that you appreciate that we are and will continue to make sure you are taken care of. For best response time, it's always best practice to give us a call directly for warranty or support issues - 855.757.6877 - Thank you for your business.
I just spin in my chair weeeeeeeeee
ONG thx for the help NOT!!!!!🤣