Quando a cadeira faz um barulho como se estivesse freando ou travando na hora de acionar o hidráulico com cliente sentado na poltrona pôde se essa peça apertada demais?
To put a new pump on to the chair you unscrew the old pump from the round rim and put the new pump in. Just make sure like the video you have the chair top off which will make things easier.
What about if will not go down easy. But slow and sounds like bubbles in oil reservoir while the fluid is shifting inside. Very slow to go down after adding new fluid. Uugh. Yes brake works correctly
My problem is chair still swivles. If I tighten nuts to much chair won't swivles but won't go up either. Almost like not enough hydraulic oil, if hydraulic. Could be air piston. Can someone please advise.
It just depends on the chair. Feel free to look at our chair options at www.ccibeauty.com. There are height information listed on the product description.
do not use pliers, you will strip the nut. Use SAE wrenches in imperial sizes, or an adjustable spanner or a crescent wrench. Metric wrenches like those shown are available nearly EVERYWHERE in the USA.
It just depends on the chair. Feel free to look at our chair options at www.ccibeauty.com. There are height information listed on the product description.
Can this kind of adjustment fix the issue if the chair gets stuck in up position and doesn't come down easily?
Quando a cadeira faz um barulho como se estivesse freando ou travando na hora de acionar o hidráulico com cliente sentado na poltrona pôde se essa peça apertada demais?
Did you fix the problem i have the same
How to open the pump and change to the other chair
To put a new pump on to the chair you unscrew the old pump from the round rim and put the new pump in. Just make sure like the video you have the chair top off which will make things easier.
What about if will not go down easy. But slow and sounds like bubbles in oil reservoir while the fluid is shifting inside. Very slow to go down after adding new fluid. Uugh. Yes brake works correctly
hello I would like to know where I can get that piece, my chair is broken by that little piece, I hope your answer if you are so kind thanks ...
Exactly what piece are you looking for? If you didn't purchase the chair for us the parts may not fit correctly.
Essa bomba nao usa oleo ?
What is that part called where you put your foot on to raise the chair
Footrest Lever
My problem is chair still swivles. If I tighten nuts to much chair won't swivles but won't go up either. Almost like not enough hydraulic oil, if hydraulic. Could be air piston. Can someone please advise.
Not gonna lie, by the looks of the shorts and the voice, i thought it was a teenager and then later in the video he knelt down and i blew chunks! Lol
Hi is it possible to fix that hydrolic pump
It depends. Sometimes its easier just to get a whole new pump.
where can i find parts that fell off hydralic lift basemmmholde kickbar on
You may need to check with where you bought the chair from.
Can't you just take the pump cover off?
I agree
Can the average barber/salon chair reach a seat height of 26" ?
It just depends on the chair. Feel free to look at our chair options at www.ccibeauty.com. There are height information listed on the product description.
Wrench in video is not made in the US so you may need to find a comparable wrench or just use a pair or pliers.
do not use pliers, you will strip the nut. Use SAE wrenches in imperial sizes, or an adjustable spanner or a crescent wrench. Metric wrenches like those shown are available nearly EVERYWHERE in the USA.
What is the approx. full height of seat from the lowest setting?
It just depends on the chair. Feel free to look at our chair options at www.ccibeauty.com. There are height information listed on the product description.
GBU brother
Like good bero