Thank you so much, this is what I needed to learn, regarding the wavy wire. I'm going to buy the Vevor 6000 amp spotter, your video has been the decider !
I hope it works out for you . I haven't had any problems with mine. I think it's a year old now. It is a china product tho . I figure I've already go my money out of it. Thanks for the support!
Awesome work chris!..that g90 is great, I’m going to have to get my hands on one of these!..can’t wait for the shrinking metal video..one of my cars has a dented roof that I want to tackle that has that oil can effect..
That will be coming in next weeks video. It's a good question. Since starting this channel, I've really had to think about how and why I go about a repair in order to share the best way to explain the process.
I don't but I can do a quick break down in a future video. I do have the anchors , post and chain fall in my Amazon store if you want to check them out. www.amazon.com/shop/garagenoise
My experience is, it's holding up well. I use it on almost every job that comes in. Not the perfect tool but inexpensive and it gets the job done. Appreciate the comment and support!
Hi Chris, I have a question about your magnetic ground. Does it tack weld itself to the metal surface? Or does it easily lift off when you remove it? I have a magnetic one similar to the supplied one, but mine still tacks itself on. Thanks /John
good afternoon, I have a question for you, I bought a new machine and when I try to weld with the triangle it does not weld, I have it at 1.8 what am I failing
I'll see if I can help. First make sure the metal is clean. When grounding it the ground should be reasonable close to where your workin ( 1-3 feet) one other thing I've found is lightly apply the tool to the panel don't put pressure on it. It works better that way. Also , when you start pulling with the slide hammer start with light hammers it pulls better that way. Hopes this helps!
Just bought one of these. Not enough power to ground itself to brand new 20 guage melal out of the box. I tried cleaning it.. then also tried into wall no extension cord... then i used a vice grip tp clamp and wouldnt weld in all 7 setrings even in max voltage.. very dissapointed! Sending back to amazon
I have just bought this tool and have to say it’s truly amazing. I wish I had bought one of these years ago
It really is!
I have watched several of your videos now and you are really building my confidence that I can do this. Thanks for sharing!
You can do it!
Thank you for this video I’m going fix something similar I have the G 90 to and looking forward to using it for the 1st time…
Great content I injoyed waching this video stay safe garage noise
Watched 3 of your videos so far and wow. Your videos are very easy to follow and you do great work. Looking forward for the video on the slap stick!!
Thanks for watching and welcome to the channel!
Thank you so much, this is what I needed to learn, regarding the wavy wire. I'm going to buy the Vevor 6000 amp spotter, your video has been the decider !
You are welcome! appreciate the support!
Great job .....im impressed by the g90 you sold me on it i do about 15 a year was on the market for the lenco but im just going to buy the g90 thanks
I hope it works out for you . I haven't had any problems with mine. I think it's a year old now. It is a china product tho . I figure I've already go my money out of it. Thanks for the support!
Awesome work chris!..that g90 is great, I’m going to have to get my hands on one of these!..can’t wait for the shrinking metal video..one of my cars has a dented roof that I want to tackle that has that oil can effect..
That was a awesome job looking good, thanks so much for that video
No problem 👍
Nice job....
Great video
Nice job! It was about time I subscribed!
Great work! How do you manage to "preserve " the original body line?
That will be coming in next weeks video. It's a good question. Since starting this channel, I've really had to think about how and why I go about a repair in order to share the best way to explain the process.
Good job bos 💪
Great Video! Do you have a video showing your pull pole setup? I am subscribing now. Thanks
I don't but I can do a quick break down in a future video. I do have the anchors , post and chain fall in my Amazon store if you want to check them out.
www.amazon.com/shop/garagenoise
@@GarageNoise
Thanks so much!
Good
1st like!
Thanks bud!
Thank you
You're welcome
After more than a year of you using the G90, how well is it holding up?
My experience is, it's holding up well. I use it on almost every job that comes in. Not the perfect tool but inexpensive and it gets the job done. Appreciate the comment and support!
Hi Chris, I have a question about your magnetic ground. Does it tack weld itself to the metal surface? Or does it easily lift off when you remove it? I have a magnetic one similar to the supplied one, but mine still tacks itself on. Thanks /John
If it does tack to the metal it comes off easy. I don't think it does.
whats that blue paint they used to sand on to find the left over dents when you use the dent puller?
Tool makers dye link
www.amazon.com/dp/B000AYHK9A/ref=cm_sw_r_as_gl_apa_gl_i_2A7JCE60K7P2T2GWDD6A?linkCode=ml1&tag=garagenoise1-20
good afternoon, I have a question for you, I bought a new machine and when I try to weld with the triangle it does not weld, I have it at 1.8 what am I failing
I'll see if I can help. First make sure the metal is clean. When grounding it the ground should be reasonable close to where your workin ( 1-3 feet) one other thing I've found is lightly apply the tool to the panel don't put pressure on it. It works better that way. Also , when you start pulling with the slide hammer start with light hammers it pulls better that way. Hopes this helps!
Just bought one of these. Not enough power to ground itself to brand new 20 guage melal out of the box. I tried cleaning it.. then also tried into wall no extension cord... then i used a vice grip tp clamp and wouldnt weld in all 7 setrings even in max voltage.. very dissapointed! Sending back to amazon
Curious to know how much this cost to repair
I don't remember exactly but I'm thinking $2,000
Amigo yo tengo un espoter lo mande a reparar y me lo pusieron directo y me quema los pulsadores me tiene loco y triste
🤔
I bought one of those machines and sent it back it had no power.
🤔
vevor unit doesnt work for us, wont spot to clean metal- no customer support either.
Too bad the trucks value wasn't worth half the work done.
Do you think this will work on the thicker metal of a convertible quarter panel
Yes it will