Attempting Your 1st Paintjob? WATCH This Video!
Вставка
- Опубліковано 14 чер 2024
- Whether you're attempting your first paintjob or if you're struggling to get a nice finish, then you will want to watch this video. We will going over the simplest tips and tricks to get you laying down coatings from sealer, basecoat and clearcoat with ease! We are featuring Pedro from @scorpionpaint as he fully prepares this beautiful 91 beautiful Acura NSX as we Respray it back to its former glory!
🟢CHECK OUT OUR ONLINE STORE🟢
www.amazon.com/shop/paintsociety
🔺SHOP ALL Exclusive Products found on our UA-cam channel for your project! 🔺
Products in this Video:
Sagola 4600 Aqua Cap Digital: spraygunner.com/spray-guns/sa...
Sagola 4600 Trophy Truck Edition: spraygunner.com/spray-guns/sa...
PPS 28OZ: amzn.to/3Ij19O4
Respirator: amzn.to/3Ifio2z
Devilbiss Lab Coat: amzn.to/3yAHR3p
Prep Cleaner: amzn.to/3uiK4y0
Cloths for wiping car down: amzn.to/3AvAwDo - Авто та транспорт
Thank you once again my brother for sharing one of my painting works with your audience and together to be able to teach them this art of painting in addition to sharing information and knowledge, as always we have a lot of fun and see you in an upcoming video, thank you my brother.
Thank you for the awesome words. Love working on projects with you. Always learn something! When’s the next ?
@@PaintSociety At any time my brotha 😎👍🤙
Where did you get those sleeves? I thought it was mentioned in a video but i couldn't find it
@@PaintSociety t rr
@@PaintSociety t rr r
I'm 60...and painted my first car over the last few weeks. It was a 65 ford mustang. I watched dozens of videos, most of them from Paint Society! It looks wonderful, and I'm starting my second car right now.
Congrats!! That's awesome!
That's great ,I remember my first paint job it was a nightmare lol
@@thespraysociety3276 I am soooooo happy I yvwe have UA-cam as a resource. And I've go patience now--never had that until the last few years, lol
I have a 67 fastback.
I need to fix a few spots on the car. So I'm going to be blending.
@@aw8388 do a vid. Let us see. It’s awesome you started. I’m thinking of painting my car too. Cost too much outside nowadays
Don't overthink it, it's just paint. Those words carry a lot of weight. Thanks guys for everything you do 👍👍
Pedro's movements are so even and precise that he gives the impression we're watching a painting robot in a factory.
ROBO-SPRAYMINATOR
A true artist
Perfect I noticed he paints using a lot of material and no Runs that's skills.
I've been a mechanic for 20 years, and did some restoration work in the early 2000s. I've never done any major paint work myself, but I have to say this channel is pretty awesome. You guys go through everything including little mistakes that we all make as human beings. That really adds depth to this channel. You guys rock, and keep up the good work!!!
Thanks for your compliment. Glad you’re enjoying the channel
@@PaintSociety Can doy]u
I love it that you go back to basics every time, us amateurs that don't practice a lot need to hear those advices and ideas over and over.
You are such a brilliant teacher, these videos are priceless.
It is always a pleasure to watch you and how you explain the process. My Dad always said "A true professional will make any job look easy". I wish I would have had an instructor like you when I went to school to learn how to paint. Thank you for making these videos.
Thanks for showing all the details. I'm not a painter but I'm going to give it a shot and paint my 1994 red chevy dually. The hood, top and fenders are faded from years in the southern sun. Watching your channel has given me some valuable information that should help a novice like me.
You and Pedro do amazing work. So nice to see men that take pride in their work! I'm sure your customers appreciate it too.
Phenomenal job! Looks better than factory! And Pedro's spray technique is smooth and complete and satisfying to watch! Great Job, guys!
Just finished painting my motorbike, after watching nearly every video on your channel. Could not be happier with the results, and learned it all from your good self 😁😁😁
I'm 69, haven't painted a car since my early 20's. Just completed a color change paint project on my 69 Corvette, big block roadster. Used Eastwood paint products and watched probably every Paint Society video. Turned out beautiful. Thank you so much for the videos.
I really appreciate the time you take in explaining the steps you take. Ive been doing bodywork/priming and jamming for almost 4 year's now. Still the paint booth is very intimidating, but your videos have been bringing me more and more confidence. I hope to really get in the booth soon. Please keep the videos and information coming. Thanks guys.
I hope also you keep the videos coming, Very informative and clear to understand.
I can't believe how many subs you have now! I subbed way back when i did my first paint job over 2 years! Almost feel a channel OG. Still painting my own parts to this day! good video!
Thanks for being a fan for a while! A lot of subs but not all of them watch lol!!
@@PaintSociety I watch,I’m just a secret subber lol
WOW! The first coat of base laid down like silk, beautiful. I'll definitely be using wet on wet 2k sealer over my 2k primer as I don't want to spray 5 coats of base colour. Excellent job by you and Pedro!!!
God bless you, Sir! Without you, many of us would absolutely NEVER do this!
I started out as a prepper, learned how to paint then auto body repair and restoration. Now I just do collision work. Very informative video.
Wow, that is awesome work. Well done Pedro and Brian.
Brian your videos are awesome, I just did a quarter panel replacement and respray of my 02 WRX ST just by watching your video and it turned out perfect. Thanks from Australia. Cheers Ray
62, and going to be painting my old truck soon. Lots of prep work to do first. These videos have helped me feel confident in tackling the job. Keep the videos coming. We all appreciate them. Thanks!
Glad to help!!
That base gun lays it down. Pedros arm covers are fire and his technique is flawless. That booth though has me envisioned! Thank you Brian for putting these videos together for us simps!
Great job Pedro and Brian. Some day I hope to spray as good as you. Looks fantastic.
Dude thank you for this, I have a 98 Alfa Romeo 916 Spider that's suffering serious 90's Italian lacquer peel and the whole car could benefit a respray and your channel is a god send, definitely doing the job myself after this
Great job gents. Your channel taught me how to repaint my 99 slk230 that was horribly painted by the previous owner. Now my slk looks fresh for an old gal, thanks guys!
Thanks for the captions telling us what you're using ans what you're doing. Might not be right for my job, but as a newbie it'll give a good starting point!
I can't thank you enough! Watching this and the video for setting up the gun meant my first time using a spray gun went very well, and I now have a nice shiny front fender to show for it! Having come from using rattle cans for most DIY painting, a spray gun (even a chintzy Chinese one) is an absolute pleasure to use in comparison. Thanks again for the leg-up!
Pedro is a master. So fluid.
This paint job looks to be the definition of perfection! Nice work we have never used a Sagola before.
Great video you guys make it look so easy, I'm a novice and have spayed a few panels on my cars, with mixed results 😅. Your videos are giving me more confidence to do bigger jobs and can't wait to get started.
Having watched almost every one of these PS videos and actually doing my own first paint job just a couple weeks ago , i can say with experience that if you are attempting to paint your vehicle for the first time, its not rocket science but there definitely is a technique you need to learn with your own equipment. make sure you have all your materials (because i ended up going back to the paint supply to have another quart mixed that afternoon, luckily the weather was cooler and i had used the slow hardener which bought me time for a recoat of a couple spots) , make sure your surfaces are prepped and clean ,then clean and clean again. Make sure your mask job is tight or you'll be dealing with paint where you dont want it. Make sure your gun and compressor match cfm requirement. my compressor is a Kobalt 2 hp, 6.1 cfm @90psi and my gun was a hf purple 6 cfm gun .Material was Limco Supreme B/C ,( via Bumper to Bumper, Southeast Auto Parts in Huntsville ,AL ) but i just shot base color which is 1939-1952 Cape Maroon , gm hex code 3E1617, so it looks like a factory paint job ( originally lacquer and no clearcoat back then) going by what Brian says to do with it ,how to set it up, you will lay paint. It does take a lot of work to get the overlaps and speed right , but that little $9.99 gun made a believer out of me. I started on an area that if i messed up id never really see it, after cut n buff that area the finish actually looks great. But i did have a few areas with runs. Dont get nervous or upset if you have runs, you can remove those more easily ( tape and glaze, block sand until its gone, polish ) than if you have a dry spot which shows up like a sandy texture. those will require color sanding and most likely you'll end up as a thin spot (which i need to touch up as soon as the weather gets back into the 60s next week) whether it was material , settings or pure luck , i had very little overspray that i could tell. In short, while youre painting make sure you put enough paint on to color sand after. The tip about using the slow hardener on the last "Flow" coat is key. I turned up pressure just another 5 lbs, backed off the surface a couple inches and fogged that last layer on a little slower than the previous and made sure my overlaps were keeping a wet line. I had to keep telling myself to not keep laying paint when i just had. like Brian says, give it a minute to flow out. I literally watched it melt out what i was sure was going to result in terrible orange peel. I saw a comment the other day which made perfect sense..."A run in the paint is one step past perfection" so , if you have a run start to form , just adjust your speed and or distance. Having no professional training nor "paint booth" , i did have a decently lit area i built just to paint in now and for future use later. Not saying i resulted in a flawless paint job, because i do still have to work some texture out, but i impressed myself in my ability to paint my own project and gained a ton more respect for those who do this day in and day out. Thanks again to Paint Society and Brian Tonietti for putting this series of videos out there for us home/hobby/diy guys on limited funds and budgets. Dont overthink it, its just paint.
Yeah Pedro's technique is amazing so steady and smooth. Great video!
Pedro is a pro. Very smooth and confident stroke.
Pedro did a amazing job.nice
Quite helpful, thanks. Also gave me good ideas: The spray-stands for the removed parts - I used an old bar-stool with cling warp around to rest my fender, bumper and sill on (one after another, obviously) while spray-painting.
I really appreciate how much detail you put into your videos I learn so much.thank you your awsome
That technology is incredible. Very under appreciated
You two make a good team, really nice paint job.
Loyal supporter/subscriber here from the Philippines. You were a big part of my journey doing my own auto & motorcycle paint jobs in the past couple of years. God bless you brother, hope to have one of your old paint guns, the ones you dont use anymore, haha. Again, God bless you
Pedro has his movement down. It’s so consistent and steady. Great work sir.
You're a great educator Brian! Keep up the great work
amazing results, you guys are gifted !!!
Thank you 🤙
Its always a pleasure to watch paint society
Wow ! That is Beautiful
Great job Bryan and Pedro 👍🏽
Brian, budy, I told you before...your videos are soo comprehensive and detailed to the point where you can make even a silly canadian goose a good painter... sharing all these informations makes the painting of a car looks like a walk in the park... we apreciate all your hard work you put in making everything easier to understand for the rest of us who aspire at a "painter" statute one day... I wish you all the best and I'd really like to meet you one day to thank you in person for giving every of us the courage to try, to move to the next step, to dare to dream...
great job guys and thank you very much for sharing!!
Going to attempt my first paintjob this spring. This helps a lot. Great work. Thank you.
This series is incredible - I'm learning so much! Thanks for the clear and simple pointers. Seeing the clouds reflected in the final job was 😗👌
Perfect! Just what i needed to see because i am about to paint my whole car for the first time in just a month or so and this is just what i needed to see! Great work man😊🤟
Hi how did it go man?
glad to c such skilled works. the old days of people working these jobs r very scary these days. need more kids I troduced in these fields at young ages. great job guys!!!
This video is a pure gem for people like me looking to get into the game…🔥🙏🏽
Nice job fellas. Love that slogan, "don't overthink it, just paint."
I really apreciate your talents and information. Great job.
Pedros's painting is so smooth.
Absolutely beautiful paint job.😍
.I love see you painting together to Pedro. Becacuse scorpion paint and paint society are my favorite car paint chanal.
Thank you Mauro 👊🤙
OK...so 'Ive always wanted to paint my own stuff. been collecting tools gear etc...for a long time. First vid I watched was the inflatable booth and now this one. I'm gonna paint the truck I am building. I'M GOING TO WATCH ALL YOUR VIDS ON THIS STUFF AND WITH YOUR TUTORING ON THIS PLATFORM.....NOT SKEERED!!!!! Thanks!
Man I LOVE a good autobody/painting video.😎😎😎
I like the way Pedro handles his gun.
I want to do automotive paint as a hobby! Learning from you Paint Society! 🚗 🚘
Unfortunately I am a raw beginner and do not have access to all the right painting equipment however watching and listening to your videos has improved immensely my attempts at car painting. Thank you, thank you, thank you
There is a lot of skill and hand eye coordination involved in work of this quality. I find it intimidating as I am getting ready to do my first paint job.
You and pedro are the dream team for real
Thank goodness I found this! I'm getting ready to paint my f150 with a hollowgraphic glitter on black basecoat!!!
Beautiful results! 🤗
Great job guys,loved it.
Fire!!! This guys a BEAST!!! He makes it look easy. Good content.
Very professional guys , beautiful work, all the best
Pedro is the man, nice movement on the wrist.
Thank you for teaching me
Great job👍👍👌 As always your work is second to none🥇🏆
Thank you!
Showing the pressures your using was very helpful
Great job as always. True professionals
You guys are good…really good! Love the content and how you explain how and why you’re doing things👍
Nice consistency and speed Pedro, awesome skills.
I notice how you continue on top panel coming from bottom (vise versa), makes sense🤙🏼👍🏼
thanks for showing the barrier coat, was going to ask about that at some point, great series, cheers.
Man you and your crew is Amazing. Your Video always helps. I dig your instructions you make it simple i have done 2 complete paint jobs and they came out 80 % as i grade myself, Thank you Brother from FL
The channel where the learning doesn’t stop after the video ends thank you Brian ! Hope to meet you someday
You remember! I’m going to have to bring the catch phrase
Looks great guys!
Absolutely beautiful job fellas!!
i like pedros technique. hes constantly holding down the trigger. he barely lets go.
Great job guys and the sealer was a great idea.
Perfect timing. I'm doing my first paintjob in a month haha. Getting all my info and tools ready now.
Same here...
Looks amazing
I like how Pedro doesn't fan is spray at the end of his stroke very good and he keeps the gun at 90°, good job Pedro
Wow beautiful job guys.
Thanks for your videos! I learned how to paint from you guys and I’ve done a few great paint jobs, I love the videos
Great video great information ❤️❤️❤️ much love from california may God bless you guys for what you do thanks
Always a lot of fantastic information in these videos and I can't get enough of it! I do have an odd ball question for one of my many projects if I may ask here.
I spray envirobase and solid reds always cover in 2 coats, definitely one of my favorite colors to spray !
This was just awesome! Thanks a lot!
Looks fabulous
Great video guy's, I am getting ready to primer seal my Honda and paint.
Beatifull colors you put on the cars. That red is awsome
Awesome job thanks for the great tips you guys rock 👌👌
Beautiful as always guys!!!
Beautiful! Well done!
Excellent video and painting. Amazing.
Gorgeous
Great job guys!
Great information, i learn something on EVERY video....