Building a pre-fab steel building frame
Вставка
- Опубліковано 5 тра 2021
- Steel building a Watermelon packing shed in this episode.
I give insight on the process as we install the steel frame.
Hougen Mag Drill: amzn.to/3emi30E
Stabila plate level 7'-12' extendable: amzn.to/3h4JCNT
DEWALT DCF622B 20V MAX XR Versa-ClutchTM Adjustable Torque Screwgun:
amzn.to/37q4zNO
Use these links for some tools I recommend. Check them out.
Thanks for watching and Please smash that SUBSCRIBE button
Give a thumbs up, and hit the notification BELL.
Follow on InstaGram: @NARF.Buildz - Навчання та стиль
Righty tighty, lefty loosey....got it!
Just an update the building is up and all went well thanks for all the great info.
Thank you for making the videos.
Great Video Sir! The way I’ve used to line up the ridge is snap a line on the concrete and laxer up to a mark underneath the purin(s)
thank you for all the great content.. i just finished pouring the floor on Tuesday for my 55x80x20 steel building. Watching your channel gave me the confidence to put mine up.. Starting the buid Monday . thanks again from Canada
Hope all goes well on your build. Thanks for the support!
@@BuildingwithNARF Thank you for the kind words . Day two of the build me, and two helper with no experice and we have the cross bace center of the building up with no major issues. I'll try , and post a short video at some point.
اترك رقم جوالك واتساب للإتصال بك شكرا
It's cool!
Great explanation of what you are doing and how you are doing it!! Good stuff. Just got to the end wall on my new 40x60x16 boat shop and they gave me the wrong parts!! 🤦♂️. Not sure what will happen now. But they are so behind on stuff we will prob end up fixing it ourselves. I can’t wait a month for replacements.
Good luck!
THANKS!!
Holler @ us so you don’t have to get the mag drill out ! We design, manufacture, ship anywhere in the country!
Very Competitive Pricing!
Great video
Appreciate it
Where is the best place to get your prefab building ? looking to build in illinois. thank you
Prefab question what is the best way to shim the up right beams ? I was thinking of using leveling nuts and then doing steel beam grout. If I use leveling nuts my prefab panels are cut to exactly 18ft we would be 1 inch short with leveling nuts can I move the wall panel down and use the rake trim to cover the 1 inch short at the top ? Hope that make sense thanks for all your videos and all the time you take to answer questions. Great tips
Yes u can use leveling nuts under columns. Is your concrete that bad off of grade? Your rake trim can hide an inch and up to sometimes 4" of shortness on panels. The eave trim can hide up to 3" most of the time. Not recommended but should work.
Just found your channel , really liking it. I’m in construction in N Atlanta and thinking about putting up Barndominium in Mountains. I’ll be watching you!! Thanks 😊
Thanks for coming onboard
Thanks for the excellent video. Did you make piers for the columns? If not, how were the bolts to anchor the columns placed in the slab?
Concrete was done by others...I do believe there is a pier at each location of the columns. Usually about 1 1/2 yards of concrete per pier.
@@BuildingwithNARF Thanks a lot for the quick reply!
Any more videos of this building being finished?
Drill a hole in each fork so you can you shackles with the straps
Who manufactured the building?
Hello newbie here, just wondering is there a block metal building combo that is used?
Yes we have buildings with block walls
Amazing info thanks were can I get that level?
Amazon
is this constructed directly to the slab or is there a stemwall/footing recommended?
Attached To the slab but where each column is there is a substantial amount of concrete. In other words a pier with rebar mats. Also a footer/beam with rebar around the perimeter tying the piers together.
Hi There....would you believe that a 40 x 60 x 16 would need standing seam roof vs PBR? I'm in FLorida.....Thank You
Standing seam is a better roof system. It is a personal preference tho. If I could afford it I would use standing seam panels. PBR will last a long time if it is installed correctly.
Out of curiosity about how much does a building erection like this cost in terms of labor and equipment?
What would be the cost of the labor to do this project?
Hey got any videos of installing sheathing over insulation..how to set screws with out oilcanning..
Be sure to use a screwgun with a clutch. Do not use impacts!
amzn.to/2Q0P0X9
Thicker gauge steel will not oil can as bad as lighter gauge steel.
I have one video about wall panels but it is one of my first and I don't give alot of details. (Excuse the bad video quality).
Wall Panel installation with Insulation
ua-cam.com/video/bknRxoLLSuw/v-deo.html
@@BuildingwithNARF another dumb question..the sticky tape on the insulation,do you stick each peice together as you go or do you go back afterwards and stick them together
@@rossokeefe9268 our insulation just laps each other with no adhesive
@@BuildingwithNARF ok my build was built by r&n in Pittsburgh..don't know if your familiar with them..all galvanized secondary members..they made alot of mistakes in the manufacturing..drove me near insane
What do labor numbers look like installing these pre fabs?
Are you asking how much a worker gets paid?
Hello, What are the specs and weight capaciy of the telehandler used in the video?
6000lb and 36' reach
By the way, do you do business in Tennessee? I’m shopping for contractors for a new winery building. If not, do you know any reliable services in Tennessee that you can recommend? Thanks in advance!
I can get a building designed, manufactured, and shipped but I couldn't handle the installation.
Whats states do you build in
Georgia
Where are you guys ? Planning to build one
Located in GA.. I would be glad to give you a proposal. Email me at roofover556@ yahoo.com
how much does it cost to build something like this
@@BuildingwithNARF i am intrested in building something like this
Contact me at roofover556@yahoo.com
Which country sir
USA
What are the measurements of the shed?
100*100
Hard hats??
How about you not worry about it! I never where them
Hello there I been watching your videos and I think you the guy can help me in my project 40x60 building let me know thanks
How can I help you?
Hello and greetings. I would like to thank you for recording such videos, which help people like me a lot. I have a request from you. My request is that you help me to build the halls I want. My hall has an opening of 30 meters, but without the middle column at a height of 6 meters. I want to know with what size H beam I can build these halls. I will build it. Of course, if the opening is 30 meters, it will answer. If it doesn't answer, I can make the opening of the shed up to 23 meters. I am waiting for your correct answer. I thank you again for your help. I wish you a good day.
there is always somebody out there showing how to do it wrong and the most unsafe way to do it . osha would love you they are for profit organization and the money they would make of you would be very high
you have no clue how to hang iron. UNSAFE!
Why don't you post a video showing everyone how it's done instead of just talking about it
Sounds drunk. Pass.
So bored video.
Unless someone is a contractor familiar with these materials and methods, no one knows what you are talking about.
اترك رقم جوالك للإتصال بك