Mongoose Dolomite ALX 1x Budget Conversion Upgrade - AliExpress Budget Crankset for a Fat Bike 120mm
Вставка
- Опубліковано 12 вер 2024
- Found a budget friendly 1x upgrade for the Mongoose Dolomite ALX! I am very pleased with this product and definitely recommend it to anyone who is willing to wait a little longer for a very nice upgrade option!
Be sure to grab the 120mm version and the one that includes the bottom bracket!!!! CLAW-TT-120 Then you can grab whatever 104 BCD chain ring you would like!
www.aliexpress...
Chain ring that would work with the crankset
www.amazon.com...
Tools used -
www.amazon.com...
www.amazon.com...
www.amazon.com...
Thank you! Finding bottom brackets for fat frames is kind of difficult, and this video made it super easy.
Absolutely!!! Still using this set up and it works great!!!
I'm a bigger guy that's new to fat tire bikes. I know that one of the first things I need to do is upgrade the crankset but had no clue where to start. Thank you for the information and the links!
Of course and glad you found this helpful! Mine are still going strong and have been Great!
Thanks so much for posting this! I'm getting back into cycling after a long hiatus, and have I bought a Mongoose Hitch to use as a trainer and to orient myself to what I need in a bike. I went in blind buying this, (most everything at the lower mid price point is sold out) but for the most part have been able to upgrade all the parts I need to, except for the odd size of the bottom bracket. I've done some typical upgrades to tailor the bike to me, but I thought I was stuck with a square taper crankset until I saw this video! I never thought to look into Alibaba, so this opens up a completely new area to browse. The attention to detail where you place the links to the parts and tools made me instantly hit the subscribe button! I just can't tell you how much I appreciate that.
The Hitch has either a 100 or 110 mm BB, based on where I measure from, and I have heard reports that the 100mm bracket will work, but I haven't confirmed it yet. The spindle is 1750mm, so I'm kind of torn between getting the 120mm BB but getting the 1750 crankset because I feel that will be a better fit, as I'm unsure if the 190mm set will be too wide for that BB. I'm sure I will have to dig to find those parts on there, but its worth it if I can get the correct setup. I have a 100mm square taper BB arriving in a few days, so if it fits the bike I will know I can get away with the set you made a link to. I'm putting this info here in case another fellow Hitch owner is in the same boat and finds your excellent videos.
I will continue to watch your builds, as so much relates to what I'm doing with mine. Once again, thank you so much.
Thank you for your very kind words and I am so glad you found the video useful!!! Thank you for all the info in this comment as I am certain someone will find it very useful!!!! If you do have any other questions always feel free to get a hold of me!!!
Did you end up trying the 100mm on the hitch? I am looking for a bottom bracket also and have not been able to find a clear answer
Whatever happened with your hitch? I have one and am interested in upgrading also. Thanks!
It's looking good. Patiently waiting for the next ALX ride video.
That is actually in the works for next weeks video! The ride and footage is done and it went AWESOME! I'm very excited for it!
Man you wouldn’t believe how much this video has helped me. I really needed to replace the crankset it on my dolomite. But I have a question the crank arm with the chain ring ,does it not have a encap in the middle or is the hole open? I can’t really tell from the video.
THANK U SIR!!!
The whole is actually open on the crankarm. Most external bb cranksets are actually like that. Hope that helps! 😁😁😁
@@chickensendies much thanks !! means a lot my friend
I will be doing the same to mine once I order the new crankset bottom bracket combo. Your awesome video is a big help. Thanks for sharing all these upgrades! By the way, I forgot to say great looking bike!
Of course and I am so glad you are finding them useful!!!!
Woah woah woah, so you’re telling me, that a fat tire bike weights as much as my normal full suspension? I love that!😂😂
We are shedding the pounds for sure!!! 🤣🤣🤣🤣🤣
Awesome video and very helpful! Just ordered my parts and can’t wait to get them. Thanks for providing the links 👍
Of course and I am sure you'll love it as much as I do! 😁😁😁 Thank you!!!
Thanks for the link to the crankset 👍. If you are still looking to drop weight try using a set of Revoloop tubes. They are bit pricey but weigh only 159 grams per tube.
Of course!!!! That is super light for tubes!
Great video man.
Thank you and I appreciate it!
That’s sick, I have same ones and there great butt there was an issue we’re they fell off a couple times on dh tracks. Put some locktight on and works better than ever. Nice vid too!
Good to know and appreciate it, Nate!
Thanks for the great video! I got a Dolomite (not ALX) for free and am upgrading it to make it rideable. I bought and installed the 120mm bottom bracket with 192mm spindle and 170mm crank arms from Ali express. The BB fit great, but when I install the crank the spindle has gaps between the BB and the crank arm of maybe 10mm. The crank will slide from side to side if bumped hard. I added the spacers as in the video, there is not enough thread inside the bottom bracket to add enough spacers to fill the gaps. If I got a shorter spindle it wouldn't work because the crankarms barely clear the chainstays. I am baffled how in the video yours installed nice and flush, I measured to make sure my BB is 120mm. I thought of adding spacers between the outside of the bb and the crank arms but that doesn't seem sound. Am I missing something obvious?
the gaps aren't 10mm, they are much bigger than that on both sides, maybe 30-40mm on each side.
I am not sure what is going on there, but I was under the impression the original dolomite (not ALX) was not 120mm and was a proprietary size.
Thanks any ideas?
@Kevin Goscha From my quick research the bb on the dolomite is 110mm ish so i would say to make it work your only option would be spacers. Of course with out it in front of me it is hard to say.
@@chickensendies Thanks for your response and taking the time to look that up! So, if there isn't enough thread to add the spacers inside the bottom bracket cap do you think it is a bad idea to just put them between the cranks and BB on each side? Seems pretty janky to me. I might be able to just return the setup still and go back to a square taper but hate to do that.
I like how the teeth on the spindle and left arm are way bigger that the ixf ones. I'm seriously waiting for my ixf teeth to strip out when I hit a big jump. Fatty is lookin fun.
I definitely think IXF cranks are great for the money but hear you on that! I was pretty impressed with these ceanks for sure! Hope you are doing well, Cap!!! 😁😁😁
That's not just a dust cap, it's also the proload bolt so you definitely want to apply preload *before* you tighten down the crank bolts
100% correct there and I definitely missed that in the video! A few people have corrected that so thank you as well!
@@chickensendies oh ok! I tried to look for comments about it but I guess they eluded me 😅
@Genia Baida HAHAHAHA All good! You were just trying to help and help is always appreciated around here! 😁😁😁
Your BB dust cap is used to adjust the gap on the crank arms before tightening those two bolts!
Yep, no idea why I did it backwards in this video.... Appreciate it, Jack!
This bikes looking sweet man!
Appreciate it man! It continues to impress me for what you get money wise and what you can do to it via upgrades! It is just a overall great bike and super fun to work on!
@@chickensendies looks it!
@@ononewheel7 Right! 😁😁😁
I got the SRAM mounting version from prowheel on AliExpress for my Juneau. I was torn between these two. But went with the MPX11 to keep consistency between my bikes. So far it's holding up pretty good. No noises from the bearings.
Good to know on the bearings!!! I went with this one specifically because I had the 104 ring already! Nice to see you in the comments, Cody! 😁😁😁
@@chickensendies I didn't even know you had a youtube channel haha. Now I do and I'm subscribed. I'm still hesitant to say the bearings are good to go because the GT is starting to get clanky and noisy. But that was one of those X6 cranksets from Aliexpress.
@@codyphillips48 Glad to have you man and thank you for the sub!!!! It is definitely hard to tell with these budget friendly options but we shall see how the quality in the long run is! First ride went great on them though so that is promising!
Great video, straight and to the point. Will this crankset work for the Malus?
Appreciate it! I am pretty sure the bottom bracket for the malus is 111mm which is different than the dolomite ALX.
I've been on the fence about picking up N ALX and your videos make me want to pull the trigger on it. I've been hesitant only because I didn't know how upgradable it would actually be, I am fairly new to MTB and fat bikes.
Totally get that and honestly $500 is nothing to shake a stick at. It is a decent price but in upgrade terms this bike is pretty much built for it! I've been having a blast working on it and it is very user and part friendly. If you have any questions always feel free to hit me up!!!!
Thanks I appreciate it. Great content, keep it up bro. 👍🏼👍🏼
@@edgartena6062 Of course and I am definitely trying to!!!
The claw crankset is a real bargain for a good quality Hollowtech 2 crankset that is 2X Compatible...
I would put a Deore or Deore XT bottom bracket in the bike and keep the Prowheel one as a spare.
That honestly is not a terrible idea 😁
I've been using aliexpress for alot of mtb parts to I went ahead and got a zrace 10 speed casset and it looks to be pretty good for 27$ I'm going to go ahead and upgrade one of my bikes entirely with aliexpress to test the reliability of the website
where these the ones that made you go "I can see my house from here"? Good stuff once again.
🤣🤣🤣🤣 Indeed! But, I blame the pedals lol they stick out about a inch past my shoe on the side. My new pedals should be here today to ideally remedy that 😅😅😅
Just FYI, I'm fairly certain the website is pronounced "a-lee" express (like Muhammad Ali), as it's an express, consumer focused version of the online marketplace Alibaba. Hate to be that guy, but I figured you'd rather know.
Otherwise great video. I've got an ALX soon to be delivered, and I appreciate these upgrade tutorials.
No reason to hate to be that guy lol I appreciate the info because it was something I did not know! Glad you enjoyed the video though 😁😁😁
What is the width of the bottom bracket? Just picked up a Malus and upgrading some of the cheaper components and definitely want to upgrade the bracket and the crank. Looking at a 111mm backer and unfortunately not finding many options in an integral crank so going with the square. Ordered some hydraulic brakes as the stock ones are really bad.
This specific bottom bracket does have a sliding style so it will fit different sizes. The issue you will run into is the amount of spacers you would potentially have to run to make this fight correct and not have left and right play... I hope that makes sense!
I ordered one of these for mine. I'm actually considering keeping it 2x... 2x what I'm not sure 2x8,2x9? I just really hate stamped steel crank sets, not the 2x. I'm kinda amazed at just how low this thing will go, it actually takes some getting used to with how low it will go. This thing will just creep up hills from a dead stop in low gear and will just climb with very little effort.
I honestly really liked the 2x! If I did not have a UA-cam channel based around building/upgrading bikes I honestly do not know if I would have changed it. Stock works great 😁😁😁
Can this crankset be set up as a 2x
@@MrGonzo22 Mine came with the chainrings to make it a 3x, I set mine up as a 2x. You need to either get smaller little bolts to hold on the chainring or just put a thin washer in, like I did. The included chainrings are 1 or two teeth off from the original, but, consider how much you actually use the top end gear and you'll figure out that it makes no difference.
How is this crankset holding up after all these years ? Do you ride it often ?
I actually have been wanting to do a long term review on them! HAHAHAHA Still riding them and they are holding up great 😁
Great video...Question for you. I have the same bike and its a blast. Did the Q-factor change from the 2x to 1x to any significant degree after the swap?
Glad you liked it!!! Since I upgraded the drive train as well it did change slightly but due to the fact I had to set it up for a 1x10. Hopefully that helps! But, honestly it is about the same 😃
Another great how to video. I'm actually spoiled and looking forward to more on this bikes upgrades. Mines comes tomorrow. Do you have a link to the tires you have on the bike? Thanks
So the tire video is actually not up yet lol but I can absolutely get you the link for them! They are terrific tires for the price!
So this is the website where I bought the tires but they seem to be out of stock now sadly.....
www.framedbikes.com/
@@chickensendies Awww Man! You get all the cool upgrades. But deservingly so. Thanks for the tire info link. I’ll periodically check the site for restock. What do you think of the Kenda Juggernauts 26x4.0?
I know they are pricey.
@@mindofharris4463 From what I can tell they look great! If you are good with the price I'd say go for it unless you want to wait for the wolftrax!
Good job measuring in ounces also!!!
🤣🤣🤣🤣 Hey! I had a good friend recommend it 😁😁😁😉
@@chickensendies I cracked up when you weighed the whole bike in ounces!!!!
@@TheCaptainsCog 🤣🤣🤣🤣 Listen.... I was committed! 😅😅😅😅
@@chickensendies yeah you were fully committed!!!!😂⚓👍
@@TheCaptainsCog HAHAHAHA I would not have it any other way! 😁😁😁
I have the mongoose malus, hoping this crankset will work with it
I am not certain if it does or does not.... keep me posted!!!
Would love to see a how to video for adding on an air fork. I was considering buying a bolton e bike air fork for my dolomite alx!!!!
So I have been super torn on adding a air fork or not on this bike! I like the idea but with these big tires it has suspension built in HAHAHAHAHA
@@chickensendies I hear that the other thing I worry about is the bike being to tall then
@@backyardr.c.channel4732 Good point as well! Id have to get measurements and compare the forks to see what the difference would be..... Now I am interested 🤣🤣🤣
I bought a Dolomite from the scrap yard for $23. Just took the original crank off. Had to beat it and torch it. Not sure if there’s a difference between ALX and other ones. I would like to buy that crankshaft but will it fit? How would I know?
I believe original dolomite (not ALX) dies have a different bottom bracket width. You'll need to measure it to find out for sure though.
Yep thanks for reminding me. It’s 100 mm maybe the 100 mm will work. Makes sense sense it’s steel and not aluminum. Doesn’t need to be as wide
Nice! How this crankset works since then? Would you still recommending this brand?
Thanks!!! I sure would! Been absolutely terrific!
Any tips for getting the crank bolt arm off? My stock bolt is STUCK
Oh man..... Sadly none besides some wd40 or other items to help like that.
I've been riding my ALX alot I think the 2x is perfect for that bike I like the wider gear range does great on the road and off shifts super smooth I also have a trek with a 2x works great I have a new Roscoe 7 with a 1x12 works great but alot of times I ride alot of paved and gravel roads to the off-road it gives you better gears in all places I've wanted a 1x for a long time I love my Roscoe but to me a 2x would be a upgrade I'm sure there are places where the 1x is better especially for new riders or downhill enjoyed the video
The 2x was honestly terrific on this bike. I only switched it for weight savings and ease of use. But 100% personal preference tbere. Tbe ALX is a beast of a bike though and truly impressive for its price! Glad you enjoyed the video!
What rear derailleur and cassette are you using now? Links if you have them. Great info thank you.
Glad you enjoyed the video! I switched it all to Microshift Advent X and purchased it all on worldwidecyclery.com It is in and out of stock though so you will have to keep an eye on it all! Also, used a kmc 10 speed chain for it all.
Park tools adjustable wrench? Holly sh*t man. You need some harbor freight in your life😆
Oh I got that too! 🤣🤣🤣
Thanks for the video. I have a question. Could this crankset be used as a 2x as opposed to a 1x?
So very sorry for the late response!!! I must have missed this comment. You sure can use them as a 2x. If you pause it at 1:49 you can see that! Hope that helps!!!
Just a for instance question... if I get a 100mm vs a 120mm BB... I need a 120mm, but 100mm is all thats available. Why couldn't I use a 100mm BB on a 120mm Bike? Seems to me the only difference is the tube in the middle that seals out water from the frame draining. I'd think the two ends screwing into the frame would give you all the support. Am I wrong? What did I miss?
is the tube in the middle plastic? If it is, it provides no support and is only for waterproofing meaning in pratcie you could buy the two screw in ends and it would work. This is what I need to know. I'm used to making badass stuff work in wierd ways. I just want this question answered so I don't have to buy more stuff than I need to. This will also help future dolomite owners find parts for their odd bikes. If I try it and it works I will reply here and let ya know. depending on your answer.
if I can get a hollowtech bb to fit and width doesnt matter, that will free up a whole lot of people with these bikes to buy whatever they want. Of course if it does work, you'll have to waterproof the bb part of the frame somehow.
@@weskirkland5850 That is correct on the plastic sleeve portion of the bb. The problem you would potentially run into is the length of the crank spindle on the cranks not being long enough to fit through the bottom bracket.
Will this combo work for the regular dolemite?
I believe you have to get a different size due to the bb not being the same
Dumb question. Ready to order this crankset. If my bottom brackets are both 100mm (Mongoose Vinson, Framed Minnesota 2.0) would I just go w the 100mm or is it “better” to go bigger w the 120 size? Just want to make sure the 100 won’t be too tight when adjusting the chain line. Thanks.
If it is 100mm then go with that! The spindle length on the 120mm will probably be to long for your bike.
@@chickensendies ok, I was overthinking it haha. Thanks for posting your content, very helpful and entertaining.
@J Rockvideo Of course and I appreciate that!!!
Hey just had a quick question regarding the bottom bracket tool you are using for the new BB. I'm looking for a park tool, just wondering if the bracket/tool is a 16 notch with a 41mm OD? Thanks in advance!
It sure is a 16 notch tool! BBT 69.2 should be what you are looking for 😁😁😁
@@chickensendies Awesome! Thanks so much, and for being so punctual with your answers. Just found out you are FD, so thanks for your service as well. I'm prior LE, and I've seen your brothers do some truly heroic actions to save others. Respect.
@@jamesgritman5477 That really means a lot, James and I certainly appreciate it and you as well sir!
you put the preload cap before you tighten the crank arm bolts man. that's not just a "dust cap". That's there to load your bearings and snug the crank arms before tightening bolts..
This has actually been discussed before in these comments and you are correct! Thanks for commenting 😁
WHAT SIZE IS THE ORIGINAL BOTTOM BRACKET FOR THE MONGOOSE DOLOMITE ALX???
The original is 120mm
@@chickensendies
Thx bro 👍🏽
So when I order a new braxket
just look for 120mm bottom brackets!!!
I just got a Mongoose Hitch. I installed a shimano megarange. But I want more power going up hills. What size should I get? More teeth or less teeth?
You can go smaller up front or bigger in the rear. Either one of those would help get up big/steep hills easier. If that is what you mean by more power 😅😅😅
Will this option work for the Mongoose Malus as well? Thanks!
I believe the Malus has a slightly different size but I do not know what it is sadly
It is ok if you do not use the BB shell?thanks
It is ok but it is there to help keep nasty stuff out of the bearings in the bottom bracket. But there are plenty of people who do that.
You get those tires tubeless?
I sadly did not even try..... Wanted them for weight savings and better traction.... Good eye though! Those will be the star in another vdeo! 😁😁😁
@@chickensendies Very interested in the tubeless setup since I'm having issues with tubeless tires on the non-tubeless rim. Running 29er Tannus Armor inserts for now pulled off backup bike, but hate the fat tubes especially carrying a spare. May look into those Q tubes you recommended for spare. However, required for the rocky and chunky trails I ride.
@@ghostdancer9993 I definitely need to look into tubeless. I saw one gentleman attempt it on here with no success so I am not necessarily holding my breath. Also the main reason I have not attempted myself
@@chickensendies Forgot to mention great video and thanks for the BB references and breakdown. Second when's the full suspension 150mm travel fork coming for your downhill expeditions :-) Been searching for a bit for an inexpensive one but not finding ones I like and I upgraded to 4.8" tire since I found some on clearance tubeless. I guess the savings will go to the fork. Front works ok but rear I get chain rub on the lower part of the return which I think converting to the 1x pushing the chain out from the 22T chain line to the 32T 1x chain ring will fix.
@@ghostdancer9993 It is funny you ask about a full suspension because I may have one coming in soon 😁😁😁 Glad you found the video helpful and really appreciate it! Hopefully the 1x will fix that but how you like the bigger tires?
If you switch to 1x from 2x, do you need the left trigger shifter?
Nope! It comes off!
So its the "CLAW-TT120 BB" right?
That is the one you need!
I checked over at aliexpress for a chainring guard for the dolomite and didn’t find anything for the 120mm BCDsize. I’m trying to find something to help keep the grime off my wife’s pants when she is on her mongoose. Any suggestions?
So I got a GMC Yukon fat bike for free. I think the bottom bracket is 120mm. So this product should work ?
As long as its 120mm bsa you should be solid!
@@chickensendies thanks. I already tried different amazon ones and those are too small. I was thinking just going square tapered again.
@@UncletonyC Yep that is exactly what I was trying to state in this video for people with fat bikes. The bottom brackets on Amazon are all the wrong size so that is why I went exploring to find one that was budget friendly. When I found this 1 I was so very excited!
@@chickensendies I’m going to order it. Thanks !
@@UncletonyC of course and let me know what you think!!!
Any recommended torque specs for BB cups and Allen bolts on the spindle arm?
Hey, Timothy! Typically for the cups I go around 30ish and the spindle bolts 10-12. I was not able to find any actual torque specs so definitely do what you think is best!
Cool thanks ! I’m assuming you mean ft/lbs and not nm correct ?
@@timothyfuqua Yep! Not nm. Sorry for not clarifying!
I appreciate the response !!! Thank you sir
@@timothyfuqua Of course! 😁😁😁
Has anyone tried one of these on a regular dolomite? Wondering if it would fit the same. Thanks
You have to get a different size because the Dolomite is not 120mm like the ALX sadly
Do you recommended this ?
How is the durability of this product?
Still rocking them and they have been FANTASTIC!
@@chickensendies thanks for the information bro.
@@evisdateh2463 of course!!! 😁😁😁
Do i have to cut off my chain if i downsize my 40t chainring to 32-34T?
This should work on the Malus too right?
The malus I believe has a different sized bb. Let me double check though and get back to you!
Does it work on the malus?? I just ordered thinking it would
@@bobypopodid they work on your malus fast bike?
mine doesn't say alx, what crank would mine use ?
If you have the original Dolomite (non alx) the bb should be 100mm not 120mm like the ALX.
@@chickensendies im needing the crank arms spaced apart further, would a 120 still work ? or 170 ?
@@wonderwond 120 would be cutting it really close imo with the external bearings.
@@wonderwond These cranks I believe have a 100mm bb option.
@@chickensendies so 100bb x170 ?
Its a Budget crank set but shipping it to the US is way more than what your paying for the parts
I am definitely not saying you are wrong there lol but the quality here is very impressive. Even after the shipping cost this is absolutely a great deal and upgrade for this bike. Especially with the lack of budget choices for this specific bottom bracket and crank spindle length that it requires. Hope you enjoyed the video and thanks for the comment, Isaiah!
What kind of crankset would you put on a mongoose malus
@@isaiahjohnson3464 well.... According to my google search and information I got the malus has a 111mm bottom bracket and primarily only square tapered bottom brackets come in that size. This is a interesting question for sure on what to do.
how long is you square taper bb, 120mm ? coes i messured mine and its 100mm ?
The Dolomite ALX is 120mm. Do you have just the dolomite?
@@chickensendies thx for the fast reply 😎 i have a CCM Brut 4.0, i messured my square tapper bb, but its only 104mm.
Would i need to buy the 120mm or 100mm set ? Thx again 😎
@DJ WILDKID There are some fat bikes that do that. It is more of a "proprietary" size, but you can still upgrade it!
@DJ WILDKID This crankset will work but you need to grab the 100mm size because the 120mm will be to wide.
I can't find that claw pn anymore. damned covid bs. it messed us all up.
Do you know if this upgrade will work on the mongoose Vinson?
Well, looks like the vinson is 100mm bb not 120mm like the dolomite ALX so the one I used would not. You would have to purchase the 100mm bb one.
In the video didn’t you say the bb was adjustable from 83,100 and 120?
@@jasonkaatz2837 I did over the bb. But the issue you will have is crank spindle length for the 120mm bb. The 120mm crankset length would be too long. If you buy this crankset just grab the 100mm bb one and you should be good.
@@chickensendies are you able to send me the links to the parts I would need? This is new to me and I’m not really sure. If not I understand. Thanks
I would need the sprocket as well
Under 35 pounds good job.
Appreciate it! It was definitely a fun challenge HAHAHAHA
I almost bought one of these bikes but it didn't have a tapered headset, I ended up buying a Canyon Dude 8. 30.07 lbs.
That is a great bike for sure! I absolutely lover Canyon. I used to own a Strive but it sadly came to a early end due to a accident on the interstate. I am sure you are loving the Dude!!!!
U r price
I've been using aliexpress for alot of mtb parts to I went ahead and got a zrace 10 speed casset and it looks to be pretty good for 27$ I'm going to go ahead and upgrade one of my bikes entirely with aliexpress to test the reliability of the website
I was definitely impressed with Ali and will be using the again no problem!!! That us a great price for a casette as well. Definitely great savings if you do not mind a little extra wait time!