Freeze the bearing, heat the housing in oven or with a heat gun. Bearing drops right in with out hammering on it a bunch. But I’ve done your way, it works! Good video!
Weird my rear diff has a spring in the cuppler what ever it's called. My sld blew apart putting it back together is a pain..is it supposed to be super tight so it doesn't move?
If you heat the housing with a heat gun it will slide together a lot smoother with out so much pounding.
Freeze the bearing, heat the housing in oven or with a heat gun. Bearing drops right in with out hammering on it a bunch. But I’ve done your way, it works! Good video!
The gear teeth need to be polished before installing them, especially new ones.
Weird my rear diff has a spring in the cuppler what ever it's called. My sld blew apart putting it back together is a pain..is it supposed to be super tight so it doesn't move?
I have a rear differential problem not sure exactly what yet. It only drives in 4wd. How can I check if it’s the coupler or something else
A good trick is tape the old bearing to the new with black tape. It peels off as the bearing goes in anyway. Works good.
How does that last silver spline piece that connects to the side by sides shaft go in . Is the only piece you didn’t put back on
What about the gears I have a bad diff and can’t find one
The gears were ok. Not the worst I ever saw. We rebuilt because the seals were leaking and the diff was full of muddy water